- Stock: In Stock
- Model: 9622
- SKU: SAT3792
- Location: India
This kit comes with AlphaBot robotic platform (line tracking, obstacle avoidance, speed measuring, IR control), and a camera (with servo and 2 DOF pan heads).
With modules in the kit, you can fast get started with robotic development like line tracking, obstacle avoidance, IR remote control, video monitoring via a network, etc. What’s more, thanks to the rich Raspberry Pi open-source resources, and the modular design of AlphaBot, you’ll learn how to extend and refit, and finally, build your own Raspberry Pi robot.
Note:
Raspberry Pi is NOT included.
Features:
- Raspberry Pi/Arduino interfaces, works with either one separately, or both
- Arduino extend header, supports Arduino shields
- Modular design, plug-and-play modules like line tracking, obstacle avoidance, speed measuring, etc. eliminate the trouble of connecting mess wires.
- LM298P motor driver with diode protection circuit, more safety
- LM2596 voltage regular provides stable 5V power to the Raspberry Pi/Arduino
- TLC1543 AD acquisition chip, allows the Pi to use analog sensors
What’s On Alphabot board:
Raspberry Pi interface: for connecting Raspberry Pi
Arduino interface: for connecting Arduino
Motor interface
Ultrasonic module interface
Servo module interface
Obstacle avoidance module interface
Speed measuring interface
Battery holder: supports 18650 batteries
Reserved power input (not soldered): for connecting other external power supply
Arduino expansion header: for connecting Arduino shields
UART interface: for connecting Bluetooth module, to control the robot remotely via Bluetooth
SPI interface: for connecting NRF24L01 wireless module
Line tracking module interface
TLC1543: 10-bit AD acquisition chip, allows the Pi to use analog sensors
LM298P: dual H bridge motor driver chip, up to 2A current
Anti-reverse diode
Power switch
LM2596: 5V regulator
Power indicator
UART switch: turn on to enable serial communication between Raspberry Pi and Arduino
IR receiver: control the robot remotely via infrared
Raspberry Pi/Arduino selection: select the Raspberry Pi or Arduino to control the robot peripherals
Package Includes:
AlphaBot mainboard x1
Tracker Sensor x1
Photo Interrupter Sensor x2
Infrared Proximity Sensor x2
Motor with gearbox 2PCS x1
AlphaBot wheel 2PCS x1
AlphaBot acrylic chassis x1
Motor mounting plate 4PCS x1
Omni-direction wheel x1
20-slots encoder disk 2PCS x1
IR remote controller x1
XH2.54 4cm 4Pin 2PCS x1
XH2.54 4cm 3Pin 2PCS x1
XH2.54 4cm 7Pin x1
AlphaBot screws x1
RPi Camera (B) x1
SG90 servo x2
2 DOF pan and tilt kit x1
15PIN FFC 25cm x1
Micro SD Card 16GB x1
Power adapter US standard 5V/3A micro x1
USB Micro-B to USB-C Adapter x1
Micro SD Card Reader x 1