This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go.The board itself is tiny, at a..
₹470.01
Ex GST: ₹398.31
The Acrylic Adjustable Camera Mount Module for Raspberry Pi is an adjustable mount setup for the Raspberry Pi camera. These are cut out of the acrylic sheet.Raspberry Pi Camera Module Mount is a great accessory for Pi shutterbugs. The Pi camera can be attached using little screws, also the design al..
₹89.00
Ex GST: ₹75.42
Aluminum Heatsink kit is used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.Besides, the installation is simple, what you need to do is to remove the heatsink prote..
₹56.64
Ex GST: ₹48.00
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in.Features:compatible with classic or NoIR type raspberry cameraColor: White - BlueLength: 150mm Width: 1..
₹239.00
Ex GST: ₹202.54
Night Vision Infrared LED 3W for Raspberry Pi Camera is the additional focus that can be added to your night vision surveillance camera project using Raspberry Pi. The Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera features the Onboard photoresistor for ambient light detection. Als..
₹194.00
Ex GST: ₹164.41
This Transparent case designed for the Raspberry Pi 2 B and Model B+(B Plus) to give you maximum use of the Raspberry Pi, it provides openings for all the connectors( 3.5mm Audio / Micro USB Power / HDMI Video / Ethernet/ 40 Pin GPIO/ DSI/ USB ports) and comes with four screws that will keep the cas..
₹149.00
Ex GST: ₹126.27
The official red and white enclosure from the Raspberry Pi foundation, specially designed for the Raspberry Pi 3 Model B and Model B+. The versatile design is simple to assemble and allows easy access to all the Raspberry Pi ports and controls without leaving it unprotected.FEATURES :The optional cl..
₹164.00
Ex GST: ₹138.98
Raspberry Pi 4 Case is made of strong ABS plastic material with a Red-White combination and meticulously designed for Pi 4. It will provide adequate protection for your Pi and access to all the ports. This case comes with a Raspberry LOGO engraved on the white top of the cover and Rubber pads a..
₹379.00
Ex GST: ₹321.19
This camera cable for Raspberry Pi Zero and allows the Raspberry Pi board for imaging capabilities. This Raspberry Pi camera cable is 160mm in length and is suitable for the CSI ports on the Raspberry Pi Zero board. The camera cable is a flexible ribbon cable and can easily be swapped in and out. Th..
₹99.00
Ex GST: ₹83.90
Raspberry Pi Zero Case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid, and a camera lid.It also comes with an exclusive short ribbon cable that will connect your camera module to your Raspberry Pi Zer..
₹169.00
Ex GST: ₹143.22
If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, then the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get a 16-Channel 12-Bit PWM/Ser..
₹299.00
Ex GST: ₹253.39
Raspberry Pi released an official 48W (8V DC, 6A) power supply, designed for use with the Raspberry Pi Build HAT. Similarly, it can also power the Raspberry Pi via the BuildHAT.Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power t..
₹1,170.00
Ex GST: ₹991.53
This USB Type B to USB Type C adapter can solve the problem of buying and keeping different Charger/adapters for our C-type port gadgets. With the help of this converter, we can easily use our old Power supply with the Micro USB plug. It is simply plug and play converter.Connector A:USB Type Micro-B..
₹59.00
Ex GST: ₹50.00
Connect latest Raspberry Pi 4 with this Official Micro HDMI (Male) to Standard HDMI (Male) Cable, It has nice moulded grips for easy installation, Nickel plated connectors and Mylar-foil shielding for highspeed data transmission. With 1 meter long (about 3 feet) allows you to easily conn..
₹429.00
Ex GST: ₹363.56
With each iterative edition of the Advancement in Development boards, they get more small, and outdated HDMI-A display connectors are being replaced with MINI and MICRO HDMI ports. As a result, having such an adaptor on your workstation is now required.This official Raspberry Pi Mini HDMI male to St..
₹185.00
Ex GST: ₹156.78
RP2040 is the debut microcontroller from Raspberry Pi. It brings our signature values of high performance, low cost, and ease of use to the microcontroller space. With a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and rich peripheral set augmented with our ..
₹79.00
Ex GST: ₹66.95
The 16 mm lens provides a higher quality image than the 6 mm lens. It has a narrow-angle view which is more suited to viewing distant objects. Ensure the C-CS adapter that comes with the High-Quality Camera is fitted to the lens. The lens is a C-mount device, so it has a longer back focus than the 6..
₹6,249.00
Ex GST: ₹5,295.76
The 5MP Raspberry Pi Zero W Camera Module W/ HBV FFC Cable equips flexible cable for attaching with Raspberry Pi Zero W. The 5MP camera module is perfect for small Raspberry Pi projects which have very little space allowance just boot up the latest version of Raspbian and you are good to go!!!The hi..
₹399.01
Ex GST: ₹338.14
A low-cost 6 mm lens is available for the High-Quality Camera. This lens is suitable for basic photography. It can also be used for macro photography because it can focus on objects at very short distances. The lens is a CS-mount device, so it has a short back focus and does not need the C-CS adapte..
₹2,449.00
Ex GST: ₹2,075.42
The 7″ Official Raspberry Pi Display with Capacitive Touchscreen gives users the ability to create the all-in-one, integrated projects such as tablets, infotainment systems, and embedded projects!The 800×480 display connects via an adapter board which handles power and signal conversion. Only ..
₹7,599.00
Ex GST: ₹6,439.83
This Black Heat Sink Set of Aluminum is Suitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4BFeatures:Set of 4 aluminum heat sinksSuitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4BThese heat sinks have profiles that are short enough to fit within standard Raspberry Pi cases.Material: aluminumColor: Bla..
₹99.00
Ex GST: ₹83.90
Micro USB-B (Female) to USB Type C (Male) Converter Adapter is designed to connect Devices with Type C Port with Standard Micro USB Charger/Adapters, like Latest IoT Development Boards in robotics and DIY projects as well as for All latest Smartphones, Tablets and Laptops with a new USB C type port ..
₹69.62
Ex GST: ₹59.00
This Official Case for Raspberry Pi Red, White is designed to fit Raspberry Pi3A+.The high-quality ABS construction consists of two parts. The base features cut-outs to allow access to the micro SD card and the HDMI, audio/video and USB ports, as well as the power connector.Features:All primary port..
₹220.00
Ex GST: ₹186.44
Connect latest Raspberry Pi 4 with this Official Micro HDMI (Male) to Standard HDMI (Male) Cable, It has nice moulded grips for easy installation, Nickel plated connectors and Mylar-foil shielding for highspeed data transmission. With 1 meter long (about 3 feet) allows you to easily conn..
₹449.00
Ex GST: ₹380.51
The all-new the Raspberry Pi 3 Official Case for Raspberry Pi 3 Red/White is a 5-part Enclosure for Raspberry Pi 3 Model B and B+. Official case for the Raspberry Pi from the Raspberry Pi Foundation.It has removable Lid for easy access to the camera and display ports, Removable Side Panels with easy..
₹249.00
Ex GST: ₹211.02
This is an all-new product from the Raspberry Pi foundation, designed specifically for the Official Raspberry Pi 4 Case to provide optimal airflow for Raspberry Pi 4. The Official Case Fan comes with an 18mm*18mm*10mm aluminum heat sink with a self-adhesive pad improving heat transfer from the proce..
₹429.00
Ex GST: ₹363.56
Keep your Raspberry Pi 4 Model B safe and protected with all-new Official ABS case from Raspberry Pi foundation. The case is made of strong ABS plastic material with Red-White combination and meticulously designed for Pi 4. It will provide adequate protection for your Pi and access to all the ..
₹349.00
Ex GST: ₹295.76
Create the complete desktop ecosystem of Raspberry Pi at your desk with an official Raspberry Pi Keyboard and Mouse. In India, we generally use the US Layout keyboard and therefore we have imported the US layout Official Raspberry Pi Keyboard from RPI officials.The keyboard is a 78-key matrix, like ..
₹1,399.00
Ex GST: ₹1,185.59
Create the complete desktop ecosystem of Raspberry Pi at your desk with an official Raspberry Pi Keyboard and Mouse. In India, we generally use the US Layout keyboard and therefore we have imported the US layout Official Raspberry Pi Keyboard from RPI officials.The keyboard is a 78-key matrix, like ..
₹1,399.00
Ex GST: ₹1,185.59
Create the complete desktop ecosystem of Raspberry Pi at your desk with an official Raspberry Pi Keyboard and Mouse. In India, we generally use the US Layout keyboard and therefore we have imported the US layout Official Raspberry Pi Keyboard and Universal Mouse from RPI officials.The mouse is a sta..
₹599.00
Ex GST: ₹507.63
Create the complete desktop ecosystem of Raspberry Pi at your desk with official Raspberry Pi Keyboard and Mouse. In India, we Generally use US Layout keyboard and therefore we have imported US layout Official Raspberry Pi Keyboard and Universal Mouse from RPI officials.The mouse is a standard..
₹599.00
Ex GST: ₹507.63
This is an official Raspberry Pi Zero case with a camera Strip and rubber pad. This Original Pi zero case has a clear engraved Raspberry Pi logo on high-quality ABS case.The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W and Pi Zero 2WThe Raspberry Pi Zero C..
₹220.00
Ex GST: ₹186.44
The Official USB type C 15.3W Power Supply For Raspberry Pi 4 is Latest officially launched power supply for all new Raspberry Pi 4 Model. It is compatible with Indian sockets operate on 90V to 230v AC and provides stable 5V 3A power to the Pi.The adapter comes with 1.5m 18 AWG captive cable with US..
₹749.01
Ex GST: ₹634.75
The Official USB type C 15.3W (UK PLUG) Power Supply For Raspberry Pi 4 is Latest officially launched power supply for all new Raspberry Pi 4 Model. It is compatible with Indian sockets operate on 90V to 230v AC and provides stable 5V 3A power to the Pi.The adapter comes with 1.5m 18 AWG captive cab..
₹749.01
Ex GST: ₹634.75
The Official USB type C 15.3W Power Supply For Raspberry Pi 4 is the Latest officially launched power supply for all new Raspberry Pi 4 Model.The adapter comes with 1.5m 18 AWG captive cable with a USB-C output connector. The design of the adapter with a Raspberry LOGO engraved on the top which make..
₹599.00
Ex GST: ₹507.63
Featuring the same 8-megapixel image sensor as the standard Raspberry Pi camera with the infrared cut-off filter removed to increase IR light sensitivity. The Pi NoIR is compatible with all Raspberry Pi models and provides highdefinition, high sensitivity, low crosstalk, and low noise image capture ..
₹2,999.01
Ex GST: ₹2,541.53
The 8MP Raspberry Pi Official Camera Module v2 can be used to take high-definition video, as well as stills photographs. It uses high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It is capable of 3280 x 2464 pixel static im..
₹2,999.01
Ex GST: ₹2,541.53
The Raspberry Pi Foundation has announced a new camera board in its official Accessories that would dramatically improve the photographic capabilities available to the popular DIY computer’s enthusiasts and hobbyists. It’s called the High-Quality Camera, It comes with a 7.9mm (Type 1/2.3) Sony IMX47..
₹4,949.00
Ex GST: ₹4,194.07
This Raspberry Pi Zero V1.3 Camera Cable is specific design compatible with the Raspberry Pi Zero – Version 1.3 and Raspberry Pi Zero W!!! Just plug it into your Pi Zero’s camera port and then the other end into one of the official Pi Cameras for photo & video joy.The cable connects Raspberry Pi..
₹109.00
Ex GST: ₹92.37
The T6712DV Raspberry Pi Official Power Supply is an official and recommended universal micro USB power supply for Raspberry Pi. Before importing we’ve tested the samples of this power supply in all kinds of situations, and it has passed all our lab tests. Manufactured by one of the third-party manu..
₹749.01
Ex GST: ₹634.75
The raspberry Pi Official Power Supply is an official and recommended universal micro USB power supply for Raspberry Pi. Before importing we’ve tested the samples of this power supply in all kinds of situations, and it has passed all our lab tests. Manufactured by one of the third party manufacturer..
₹449.00
Ex GST: ₹380.51
Control your Raspberry Pi 3, 2, A+, B+, or Zero with a flick of the wrist! The Pimoroni Skywriter HAT senses the position of your fingers in the air above.Using Pimoroni’s Python API you can read off the positional data (x, y, z) and common gestures like flick left, tap, and double tap.Because the s..
₹4,098.00
Ex GST: ₹3,472.88
Maker Pi Pico Base incorporates the most wanted Reset button for your Rasberry Pi Pico and gives you access to all GPIO pins on two 20 ways pin-headers, with clear labels. Each GPIO is coupled with an LED indicator for convenient code testing and troubleshooting. The bottom layer of this board even ..
₹881.00
Ex GST: ₹746.61
Cytron’s Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you can build your new robot friend while simultaneously trying out the new RP2040 chip!T..
₹999.00
Ex GST: ₹846.61
M5 Stack STAMP-PICO Mate features an ultra-compact design with two low-power Xtensa 32-bit LX6 microprocessors at 240MHz on a PCB as tiny and delicate as a postage stamp. low power consumption. It is ideal for any space-constrained or battery-powered devices such as wearables, medical devices, senso..
₹639.01
Ex GST: ₹541.53