The Raspberry Pi Zero W is new and improved with a whopping upgrade! Can you guess what it is? (Hint: W). No, it’s not just a letter, it’s WiFi!That’s right, one of our favorite type of upgrades has reached the Raspberry Pi Zero board. Built-in WiFi is made possible with the BCM43143 WiFi chip addit..
₹1,299.00
Ex GST: ₹1,100.85
The Brand New Raspberry Pi Zero Wireless WH (with Pre-Soldered Header) has landed at ModMyPi! The Raspberry Pi Zero is an ultra-low-cost and ultra-small variant of the original Raspberry Pi. It’s tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, protot..
₹1,479.00
Ex GST: ₹1,253.39
This is the latest version of Raspberry Pi Zero V1.1 W (Wireless), if you are looking for Raspberry Pi Zero, get it here.Yes, it is finally here. Raspberry Pi Zero W (Wireless) is available on robu.in. This is a super cheap single board computer. You get a working computer, it is cheaper than any Ar..
₹1,598.99
Ex GST: ₹1,355.08
Control your Raspberry Pi 3, 2, A+, B+, or Zero with a flick of the wrist! The Pimoroni Skywriter HAT senses the position of your fingers in the air above.Using Pimoroni’s Python API you can read off the positional data (x, y, z) and common gestures like flick left, tap, and double tap.Because the s..
₹4,098.00
Ex GST: ₹3,472.88
Maker Pi Pico Base incorporates the most wanted Reset button for your Rasberry Pi Pico and gives you access to all GPIO pins on two 20 ways pin-headers, with clear labels. Each GPIO is coupled with an LED indicator for convenient code testing and troubleshooting. The bottom layer of this board even ..
₹881.00
Ex GST: ₹746.61
Cytron’s Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you can build your new robot friend while simultaneously trying out the new RP2040 chip!T..
₹999.00
Ex GST: ₹846.61
M5 Stack STAMP-PICO Mate features an ultra-compact design with two low-power Xtensa 32-bit LX6 microprocessors at 240MHz on a PCB as tiny and delicate as a postage stamp. low power consumption. It is ideal for any space-constrained or battery-powered devices such as wearables, medical devices, senso..
₹639.01
Ex GST: ₹541.53
This is a 2-DOF pan-tilt hat based on Raspberry Pi 40PIN GPIO. It can directly be used once plugged into the Pi board’s GPIO. Meanwhile, the board makes the Raspberry Pi GPIO pins led out for your convenient use. With the I2C interface adopted, the module allows your Pi to control the camera mo..
₹1,948.99
Ex GST: ₹1,651.69
The PiKVM v3 allows for a remote connection via your Raspberry Pi even if the target machine isn’t booted! This feature-rich HAT brings powerful tools to your fingertips.PiKVM allows you to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-..
₹21,999.00
Ex GST: ₹18,643.22
Make some noise with this high quality stereo I2S audio add-on board for your Raspberry Pi Pico, with amplified headphones AND unamplified line-level outputs!Pico Audio Pack uses its PCM5100A DAC to output up to 32-bit, 384KHz stereo audio along its 3.5mm line out connector, ready for plugging in to..
₹1,449.00
Ex GST: ₹1,227.97
The Raspberry Pi X820 V3.0 Expansion Board is the updated version of the X820 V1.3 board, and this expansion board provides a complete storage solution for raspberry pi.It seamlessly connects any 2.5″ external SATA HDD/SSD drive with a Raspberry Pi Compute Module. With the Rasberry Pi X820 Board, yo..
₹3,699.01
Ex GST: ₹3,134.75
This is a high-quality universal GPIO extension board compatible with Raspberry Pi 2/ 3 Model B making working easier because of its multi-functional module. You can simply click on them to insert a wire into them, it includes all the mounting hardware required to fix the board to your Raspberry Pi...
₹320.00
Ex GST: ₹271.19
GrovePi+ is an add-on board with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with Raspberry Pi model B/B+/A+/2/3/4 perfectly.GrovePi+ is an easy-to-use and modular system for hardware hacking with the Raspberry Pi, no need for solderin..
₹3,999.00
Ex GST: ₹3,388.98
1.3inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×240, SPI is the newly launch 1.3 inches high-Quality LCD display from waveshare. The module comes with an Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico 1x Joystick And 4x User Buttons For Easy Interacting.Feature..
₹699.00
Ex GST: ₹592.37
2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi, MCP2515 + SN65HVD230 Dual Chips Solution, Multi Onboard Protection Circuits. Enable Isolated And Stable CAN Bus Capability For Your Raspberry Pi .Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards .MCP2515 CAN..
₹2,188.99
Ex GST: ₹1,855.08
This is a dual-channel isolated RS485 extension board specially designed for raspberry PI, which adopts SC16IS752+SP3485 solution embeds with protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.This product adopts SC16IS752 as a controller. SC16IS752 is a..
₹1,569.00
Ex GST: ₹1,329.66
Create your DIY 3 channel remote control to ON-OFF three electrical devices from your Mobile application The Waveshare 3 Channel Relay HAT Smart Home for Raspberry Pi 3 gives your Pi the ability to control high voltage/high current devices, which can be operated up to 230V AC 5A current easily makes..
₹1,849.00
Ex GST: ₹1,566.95
This is a 4-ch current and power monitor HAT designed for Raspberry Pi. Via the I2C or SM Bus interface, it is easy to monitor each channel’s current, voltage, and power consumption, as well as the voltage between both sides of the sampling resistor. This is a 4-ch current and power monitor HAT desi..
₹3,079.00
Ex GST: ₹2,609.32
ARPI600 is a Raspberry Pi Expansion Board, it simply adapts the Raspberry Pi GPIO interface to Arduino pinouts making it possible to use your Raspberry Pi with a precious number of Arduino shields and hardware/software resources. The ARPI600 also supports XBee modules, adds up wireless features with..
₹1,651.00
Ex GST: ₹1,399.15
The Waveshare’s Arduino Compatible Base Board For Raspberry Pi Compute Module 4 is a basic expansion board compatible with Arduino, an expansion board that can be used with Raspberry Pi Compute Module 4, and supports a 5V DC power supply with a Type-C interface. The board is populated with an HDMI i..
₹2,349.00
Ex GST: ₹1,990.68
This DC motor driver has been designed specifically for the Raspberry Pi Pico and can PWM control up to 4 DC motors at a constant current of 1.2A (3.2A peak).Power input between 6-12V can be applied, which conveniently powers the Raspberry Pi Pico thanks to the onboard 5V regulator. An on/off switch..
₹1,649.00
Ex GST: ₹1,397.46
My name is CM4-ETH-RS485-BASE-B, which is an expansion board that can be used with Raspberry Pi Compute Module 4, and supports 7-36V DC power supply and 5V DC DC power supply of Typc-C interface. Onboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interface..
₹4,898.99
Ex GST: ₹4,151.69
Waveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
CM4-ETH-RS485-BASE-B, which is an expansion board that can be used with Raspberry Pi Compute Module 4, and supports 7-36V DC power supply and 5V DC DC power supply of Typc-C interface. Onboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interfaces and two U..
₹9,449.00
Ex GST: ₹8,007.63
This Arducam IMX477 High-Quality motorized focus camera module integrates a motor that could be controlled by software for a smarter focus, and you will no longer focus the camera by screwing the lens with your bare hands. Instead, keyboard keys or OpenCV can be used to remotely control the focusing..
₹9,549.00
Ex GST: ₹8,092.37
Arducam 16MP IMX519 (NOIR) High-Resolutions camera is an exclusive camera board that takes what Raspberry Pi V1, V2, and HQ have to offer, and excels in every single aspect.It takes zero compromises in specs. With a resolution at 16 megapixels (compared to 8MP and 12MP), a stock lens, a V2-like form ..
₹2,711.02
Ex GST: ₹2,711.02
The 10.1 inch IPS LCD Touch Screen 1280×800 with Driver Board Kit for Raspberry Pi is an HD IPS digital LCD screen kit with HDMI+VGA+2AV. Do not reverse the positive and negative of the power supply. The back of the drive plate is marked positive and negative (GND). The driver board must be insulate..
₹8,299.00
Ex GST: ₹7,033.05
This TFT display is big (2.8″ diagonal) bright and colorful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display.The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital c..
₹1,169.00
Ex GST: ₹990.68
This Black colored Case for 7-Inch Touch Screen Display is a newly designed case from EasyMech. It is made of 12-pieces of black acrylic that provides adequate protection for your Touch Screen Display and open access to all the pi ports. It is very easy to assemble and de-assemble with all required ..
₹799.00
Ex GST: ₹677.12
This TFT display is big (2.8″ diagonal) bright and colorful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display.As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on ..
₹1,385.00
Ex GST: ₹1,173.73
This is a touch screen driver board that accepts four-wire cables. It’s found in touch-screen displays. The black port of this Driver module will be connected to the display, while the white port will be connected to a Raspberry Pi. We can control the display from the Raspberry Pi. It is a nice cont..
₹399.01
Ex GST: ₹338.14
This is a 15.6 Inch Capacitive Touch Screen LCD from waveshare, with a resolution of 1920×1080, and a capacitive touch panel, which supports Raspberry Pi, Jetson Nano, Windows, Game console and can also be used as a computer monitor. This product supports Windows 10 / 8.1 / 8 / 7, Raspbian / Ubuntu ..
₹17,899.00
Ex GST: ₹15,168.64
This product is a specially designed 2.8-inch CM4 touchscreen expansion board for Raspberry Pi Compute Module 4. CM4-DISP-BASE-2.8A is a baseboard that can be used with Raspberry Pi Compute Module 4, using 5V/ 2.5A USB Type Powered by the C interface, it can be directly connected to the CM4 core boa..
₹6,249.00
Ex GST: ₹5,295.76
A capacitive touch screen is a control display that uses the conductive touch of a human finger or a specialized device for input.Capacitive touch screens detect electrical current so they don’t need to experience the pressure of your finger like resistive screens doFeatures: Designed for Raspb..
₹3,848.99
Ex GST: ₹3,261.86
This is all-new Version V4.0 3.2 Inch TFT LCD Touch Screen for Raspberry Pi display from waveshare is big (3.2″ diagonal) bright and colourful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display.As a bonus, this 3.2 Inch TFT LCD Scree..
₹2,039.00
Ex GST: ₹1,727.97
This is a Waveshare 4-inch Resistive Touch Screen TFT LCD display, with a resolution of 480×320, SPI interface, and a resistive touch panel, which supports any revision of Raspberry Pi (directly pluggable). This LCD can support Raspbian / Ubuntu / Kali. Supports the FBCP software driver as well, all..
₹1,649.00
Ex GST: ₹1,397.46
This is a Waveshare 4-inch Resistive Touch Screen TFT LCD display, with a resolution of 480×320, SPI interface, and a resistive touch panel, which supports any revision of Raspberry Pi (directly pluggable). This LCD can support Raspbian / Ubuntu / Kali. Supports the FBCP software driver as well, all..
₹2,549.00
Ex GST: ₹2,160.17
This small 3.5 inch touch screen Raspberry Pi Display module is designed especially for Raspberry Pi, using the latest Linux Core system. This is ideal for DIY anywhere, anytime and does not require any separate power source or case to hold it. The module sits right on top of Pi and an ideal alterna..
₹1,165.00
Ex GST: ₹987.29
The 5 Inch Touch Screen HDMI Interface TFT LCD Module is a good solution for those who are seeking for a bigger resolution display.This TFT LCD Display for Raspberry Pi has 5″ size which features 800×480 pixel resolution. Getting the Pi onto the display board is easy enough!!! make use of stand-off ..
₹3,128.99
Ex GST: ₹2,651.69
Raspberry Pi CM4 kit with a 5-inch touch screen all-in-one machine. The PoE pin Gigabit Ethernet port supports 4K output, onboard four-way USB2.0, 5-inch touch screen, etc. The all-in-one kit is convenient for users to use.Note:Do not plug and unplug any device except USB and HDMI while the baseboar..
₹7,599.00
Ex GST: ₹6,439.83
The 7 Inch LCD Touch Display With Driver Board Kit For Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems, and embedded projects! We have packed this 7-inch display with Newly Designed Black coloured Stylish Acrylic case from EasyMech..
₹4,748.00
Ex GST: ₹4,023.73
Are you looking 5inch Capacitive Touch Display for Raspberry Pi, DSI Interface, 800×480 so this is for you. Raspberry Pi OS provides touchscreen drivers with support for ten-finger touch and an on-screen keyboard, giving you full functionality without the need to connect a keyboard or mouse. The 800..
₹4,149.00
Ex GST: ₹3,516.10
The 7 Inch LCD Touch Display With Driver Board Kit For Raspberry Pi gives users the ability to create an all-in-one, integrated projects such as tablets, infotainment systems, and embedded projects!The 800×480 physical resolution (resolution range can be adjusted between 640 x 480 to 1600 x 1200) di..
₹4,399.00
Ex GST: ₹3,727.97
This is a Waveshare 7inch 1024×600, Capacitive Touch Display for Raspberry Pi, DSI Interface. Toughened glass capacitive touch panel. It supports Raspberry Pi and can also be used as a computer monitor. This Display is Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, driver free.Hardwa..
₹6,599.00
Ex GST: ₹5,592.37
This is a Waveshare 7inch 800×480 Capacitive Touch Display for Raspberry Pi, DSI Interface. Toughened glass capacitive touch panel. It supports Raspberry Pi and can also be used as a computer monitor. This Display is Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, driver free.Hardware..
₹5,899.00
Ex GST: ₹4,999.15
Waveshare 7inch Capacitive Touch IPS Display for Raspberry Pi, with Protection Case, 1024×600, DSI InterfaceSpecifications and Features:7inch IPS display with capacitive touch panel, hardware resolution is 1024 x 600Capacitive touch, supports up to 5-points touchToughened glass capacitive touch pane..
₹7,749.00
Ex GST: ₹6,566.95