This Arducam IMX219 fisheye lens camera module is designed mainly for Raspberry Pi V2 camera board and replace the default standard IMX219 camera module with the auto focus one. It can be used for drone, robot, action camera and 3D scanning applications.The highlight of this camera is that the lens ..
₹2,499.00
Ex GST: ₹2,117.80
-15 %
The Newest IMX219 Low Distortion M12 Mount Camera Module for Raspberry Pi is mainly designed for Raspberry Pi. The highlight of this camera is its very low distortion (<3%) of the lens. No less than the Raspberry Pi official camera V2, this camera module is also equipped with a high-definition IM..
₹2,899.00 ₹3,409.00
Ex GST: ₹2,456.78
The IMX219PQH5-C is a diagonal 4.60 mm (Type 1/4.0) CMOS active pixel type image sensor with a square pixel array and 8.08M effective pixels. This chip operates with three power supplies, analogue 2.8 V, digital 1.2 V, and IF 1.8 V, and has low power consumption. High sensitivity, low dark..
₹1,899.00
Ex GST: ₹1,609.32
Arducam High-Resolutions Autofocus camera is an exclusive camera board that takes what Raspberry Pi V1, V2 and HQ have to offer, and excels in every single aspect.It takes zero compromise in specs. With a resolution at 16 megapixels (compared to 8MP and 12MP), an autofocus lens, a V2-like form factor..
₹3,049.00
Ex GST: ₹2,583.90
M12 Mount lens is mainly for Arduino and Raspberry Pi camera. This Arducam 5MP OV5647 NoIR camera comes with a motorized IR cut filter and an M12 Mount. The camera module comes preinstalled with an LS-1820 Lens. This camera module is compatible with Raspberry Pi 4/3B+/3. The camera module connects w..
₹1,598.99
Ex GST: ₹1,355.08
To make a High-Quality camera module work on applications with size and weight limits, Arducam just released this small-size camera module for Raspberry Pi CM, CM3, CM3+, and CM4. It is fully compatible with Raspberry Pi V2 module size, a 24mm x 25mm IMX477 camera board, a low distortion M12 mount l..
₹5,459.00
Ex GST: ₹4,626.27
The MINI OV5647 Wide angle camera is a custom-designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board’s upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing with cameras.The CSI bus is ..
₹6,149.00
Ex GST: ₹5,211.02
-16 %
ArduCAM team just released an 8MP Raspberry Pi compatible camera based on the same Sony IMX219 image sensor. It’s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video. It attaches to Pi by the dedicated standard CSI interface. It is supplementary for Ras..
₹5,299.00 ₹6,299.01
Ex GST: ₹4,490.68
The Arducam monochrome (B&W) global shutter 1280×800 resolution OV9281 camera module is mainly designed for Raspberry Pi boards, and it can be connected directly to RPi’s CSI-2 camera interface without additional hardware.The sensor’s global shutter and excellent low-light sensitivity allow it t..
₹5,199.00
Ex GST: ₹4,405.93
This is an Arducam Pico4ML TinyML Dev Kit: RP2040 Board w/ QVGA Camera, LCD Screen, Onboard Audio, Reset Button & More To make Raspberry Pi Pico more robust for TFLite Micro, the Arducam team took the Raspberry Silicon (also known as the RP2040 chip) and created Pico4ML, a microcontroller dev bo..
₹5,286.00
Ex GST: ₹4,479.66
-20 %
Arducam Pivariety is a Raspberry Pi camera solution to take the advantage of using its hardware ISP functions. Using Arducam Pivariety camera modules, users can get better performance and a wider variety of camera, and lens options. For a long time, Raspberry Pi users are limited to using the closed..
₹5,899.00 ₹7,401.00
Ex GST: ₹4,999.15
Arducam Pivariety is a Raspberry Pi camera solution to take the advantage of using its hardware ISP functions. Using Arducam Pivariety camera modules, users can get better performance and a wider variety of camera, lens options. For a long time, Raspberry Pi users are limited to use the closed-sourc..
₹10,573.00
Ex GST: ₹8,960.17
-11 %
PTZ is an abbreviation for pan, tilt, and zoom and reflects the movement options of the camera, and a pan–tilt–zoom camera (PTZ camera) is a camera that is capable of remote directional and zoom control. A PTZ camera is not a still camera. Instead, it could move the camera and the lens, and that mea..
₹4,329.00 ₹4,849.00
Ex GST: ₹3,668.64
This 5MP NOIR pi video camera is designed for both daylight and night vision photography with a build-in motorized(switchable) IR cut filter and two infrared LED illuminator boards. The motorized IR cut filter can be switched ON/OFF automatically, and the infrared LEDs are automatically ON/OFF accor..
₹3,499.00
Ex GST: ₹2,965.25
-7 %
The Arducam 13MP MIPI camera module is mainly designed for Raspberry pi boards and it can be connected directly to RPi’s CSI-2 camera interface without additional hardware.This camera is based on a 1/3 inch Sony IMX135 image sensor which adopts Exmor-R™ technology to achieve high-speed image capturi..
₹5,129.00 ₹5,499.00
Ex GST: ₹4,346.61
Stereo vision systems give the robots depth perception skills, which make artificial machines and systems develop an understanding of their environment by estimating the relative distance of objects in their vision from many visual cues. Hence, stereo vision is used in many areas of robotics, such a..
₹14,999.00
Ex GST: ₹12,711.02
This Arducam 5 MP 1080p Sensor OV5647 Mini Camera Video Module for Raspberry Pi is a tiny board at around 25mm x 24mm, which makes it perfect for mobile or other applications where size and image quality are important. It connects to Raspberry Pi by way of a short ribbon cable. The camera is connect..
₹1,049.00
Ex GST: ₹888.98
This Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board’s upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extre..
₹2,249.00
Ex GST: ₹1,905.93
-9 %
The NoIR version of Arducam 5 MP 1080p Sensor OV5647 Mini Camera Video Module for Raspberry Pi. This 5MP camera is natively compatible with the official Raspberry Pi camera modules and motherboards. It can be served as a night vision camera with external light sources like IR LED illuminators. It ca..
₹1,149.00 ₹1,260.00
Ex GST: ₹973.73
This is an all-new pan and tilt mechanism for the 5MP OV5647 camera, which is compatible with the raspberry pi. This mechanism can move your camera in two dimensions with 180 degrees horizontal and 145 degrees vertical movements. The PTZ camera controller board outputs the PWM signals to drive the s..
₹2,194.00
Ex GST: ₹1,859.32
In order to meet the increasing need for Raspberry Pi-compatible camera modules. The Arducam team now released another add-on camera module for Raspberry Pi series boards which is fully compatible with the official one.The board itself is tiny, at around 300mm x 16mm. The neck width of the camera mo..
₹3,249.00
Ex GST: ₹2,753.39
-5 %
This 5MP NOIR pi video camera is designed for both daylight and night vision photography with a build-in motorized(switchable) IR cut filter and two infrared LED illuminator boards. The motorized IR cut filter can be switched ON/OFF automatically, and the infrared LEDs are automatically ON/OFF accor..
₹3,675.00 ₹3,875.00
Ex GST: ₹3,114.41
This Arducam 5MP OV5647 NoIR camera comes with a motorized IR cut filter and an M12 Mount. The camera module comes preinstalled with an LS-1820 Lens. This camera module is compatible with Raspberry Pi 4/3B+/3. The camera module connects with the raspberry pi via a 15 pin flat ribbon cable. When the ..
₹3,599.00
Ex GST: ₹3,050.00
In order to meet the increasing need for Raspberry Pi Zero compatible camera modules, the Arducam team now released another add-on camera module that is fully compatible with Raspberry Pi Zero and Pi compute module.The board itself is tiny, at around 60mm x 11.5mm. The neck width of the camera modul..
₹2,129.00
Ex GST: ₹1,804.24
In order to meet the increasing need for Raspberry Pi Zero compatible camera modules, the Arducam team now released another add-on camera module that is fully compatible with Raspberry Pi Zero and Pi compute module.The board itself is tiny, at around 60mm x 11.5mm. The neck width of the camera modul..
₹2,479.00
Ex GST: ₹2,100.85
This Arducam 8MP IMX219AF camera module is designed mainly for the NVIDIA Jetson Nano platform and also can be used on other hardware like ARM, DSP, FPGA, etc.The highlight of this camera is that the lens focus is programmable by software, and the Arducam team provides an open-source code to impleme..
₹4,129.00
Ex GST: ₹3,499.15
-12 %
This is a Camera Breakout Board by Arducam based on the OV7675 0.3MP camera. The module comes with a preattached M12 6mm lens. The camera module works on 8-bit parallel mode. Which makes it easy to interface with a USB shield using the 8-bit parallel interface. The camera has a rolling type of shutt..
₹459.00 ₹520.00
Ex GST: ₹388.98
The OV7725 camera module is based on the OmniVision OV7725 image sensor which is a low voltage CMOS device that provides the full functionality of a single-chip VGA camera and image processor, as well as the extraordinary high frame rate and low light performance. The OV7725 provides full-frame, sub..
₹1,580.00
Ex GST: ₹1,338.98
-9 %
This is a complete set for the flexible ribbon cable, which can be used to connect various camera modules with the raspberry pi. The kit has 7 different types of flexible cable extension cable lengths, which contains 5 lengths for raspberry pi with 15 pin 1.0mm pitch connector at both ends and 2 len..
₹898.99 ₹989.01
Ex GST: ₹761.86
As may you aware, Arducam has done exceptionally well in its field. After a huge success with Arducam IMX219, they come up with the upgraded version called Arducam IMX477.This IMX series is widely used in applications such as robots, time-lapse photography, and more. With 12.3 MP Camera ..
₹7,740.00
Ex GST: ₹6,559.32
Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module 4, 3+, 3
Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module 4, 3+, 3 is one of the best low-cost cameras in the market. Based on the IMX219 image sensor this camera module can get a resolution of 3280 x 2464 with frame rates up to 120fps at 720P. The camera module is ..
₹3,329.00
Ex GST: ₹2,821.19
Arducam Mini Module Camera Shield 5 MP OV5642 Camera Module for Arduino is a performance improved version compared to its predecessor Arducam-M-5MP.It not only offers the capability to add a camera interface which doesn’t have in some low-cost microcontrollers but also provides the capability to add..
₹4,149.00
Ex GST: ₹3,516.10
Arducam Mini Module Camera Shield with OV2640 and is a high definition 2MP SPI camera, which reduces the complexity of the camera control interface. It integrates 2MP CMOS image sensor OV2640 and provides miniature size, as well as the easy to use hardware interface and open source code library.The ..
₹2,749.00
Ex GST: ₹2,329.66
This is a 4 in 1 adaptor shield for the ArduCam Mini Cameras. This board is designed for using up to 4 ArduCAM-Mini Camera Boards on a single microcontroller including the Arduino, BeagleBone Black, and Raspberry Pi platform. The adaptor board can be well mated with these popular open-source h..
₹1,899.00
Ex GST: ₹1,609.32
Arducam OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board’s upper surface. This interface uses the dedicated CSI interface, which was designed especially for inter..
₹2,699.00
Ex GST: ₹2,287.29
This Arducam Pan Tilt Camera Bundle for Nvidia Jetson Xavier NX/Nano is a complete pan and tilt kit for Nvidia Jetson Xavier NX/Nano boards. The mechanism is based on the GH-S37D digital servos for faster speeds and higher torque and better holding capabilities. They are controlled via a PWM servo c..
₹6,480.01
Ex GST: ₹5,491.53
The official Rpi HQ Camera module and a C-mount lens together weigh 164g, which is the equivalent of 4 Rpi 4 boards. It’s way too heavy as an embedded camera, and your good old third hands won’t work anymore, you need something more bearable to hold the HQ camera up in proper ways, you need tripods...
₹1,248.99
Ex GST: ₹1,058.47
A heat sink is a component that increases the heat flow away from a hot device. It accomplishes this task by increasing the device’s working surface area and the amount of low-temperature fluid that moves across its enlarged surface area.This is a dedicated aluminum heatsink designed specifically fo..
₹319.00
Ex GST: ₹270.34
Heat Sink Base Small Type Heat Radiator for 10A to 40A Solid State Relay SSR. Excellent performance, aluminium alloy heat sink.With a standard mounting hole.Smooth straight edges, safe to use. Easy to install.Features: Made of durable aluminium material, installable radiator design, compact siz..
₹129.00
Ex GST: ₹109.32
Small heat sink for TO-220. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt-on type with 2.5W dissipation.Features:Aluminum Heat-Sink, For Package TO-220 Triode Transistors Cooler IC ChipsetQuantity: a lot of 20 PiecesM3 Screw Hole.Size: 19x 15x 10mm/ 0.8″ x 0.6..
₹39.00
Ex GST: ₹33.05
Heat sinks are designed in a way to have a large surface area to maximize the contact with the air or fluid medium, such as air or liquid coolant to absorb heat and direct it away from the device. Aluminum alloys are preferred to be used in constructing heat sinks. This is because Aluminum is ..
₹329.00
Ex GST: ₹278.81
This 34 mm Circular Heat Sink for Motor is to cool down Motor and make it operate safely. The aluminium heat sink reduces the risk of hardware failure because of overheating of the motor and adds long-life to it.This Heat sink has 34 mm internal diameter which can be perfectly fit for 34mm motor bod..
₹89.00
Ex GST: ₹75.42
Function of this Aluminum Heat Sink is to cool down the Chip IC LED and make it operate safely. The aluminum heat sink reduce the risk of hardware failure because of overheating.Features:Prevents overheating of boardAbsorbs heat quicklyFast coolingQuantity of blade: 24Material: AluminumColor: Silver..
₹299.00
Ex GST: ₹253.39
The function of this Aluminum Heat Sink is to cool down the High Power LED Amplifier and make it operate safely. The aluminium heat sink reduces the risk of hardware failure because of overheating.This Universal Heat Sink is of size 100 x 40 x 8 mm (L x W x H) which can be used for multipurpose appl..
₹159.01
Ex GST: ₹134.75
The function of this Aluminum Heat Sink is to cool down the TO-220 package ICs and make it operate safely. The aluminium heat sink reduces the risk of hardware failure because of overheating.Features:Prevents overheating of boardAbsorbs heat quicklyFast coolingQuantity of blade: 6Material: AluminumP..
₹29.00
Ex GST: ₹24.58