-5 %
This 5MP NOIR pi video camera is designed for both daylight and night vision photography with a build-in motorized(switchable) IR cut filter and two infrared LED illuminator boards. The motorized IR cut filter can be switched ON/OFF automatically, and the infrared LEDs are automatically ON/OFF accor..
₹3,675.00 ₹3,875.00
Ex GST: ₹3,114.41
This Arducam 5MP OV5647 NoIR camera comes with a motorized IR cut filter and an M12 Mount. The camera module comes preinstalled with an LS-1820 Lens. This camera module is compatible with Raspberry Pi 4/3B+/3. The camera module connects with the raspberry pi via a 15 pin flat ribbon cable. When the ..
₹3,599.00
Ex GST: ₹3,050.00
In order to meet the increasing need for Raspberry Pi Zero compatible camera modules, the Arducam team now released another add-on camera module that is fully compatible with Raspberry Pi Zero and Pi compute module.The board itself is tiny, at around 60mm x 11.5mm. The neck width of the camera modul..
₹2,129.00
Ex GST: ₹1,804.24
In order to meet the increasing need for Raspberry Pi Zero compatible camera modules, the Arducam team now released another add-on camera module that is fully compatible with Raspberry Pi Zero and Pi compute module.The board itself is tiny, at around 60mm x 11.5mm. The neck width of the camera modul..
₹2,479.00
Ex GST: ₹2,100.85
This Arducam 8MP IMX219AF camera module is designed mainly for the NVIDIA Jetson Nano platform and also can be used on other hardware like ARM, DSP, FPGA, etc.The highlight of this camera is that the lens focus is programmable by software, and the Arducam team provides an open-source code to impleme..
₹4,129.00
Ex GST: ₹3,499.15
-12 %
This is a Camera Breakout Board by Arducam based on the OV7675 0.3MP camera. The module comes with a preattached M12 6mm lens. The camera module works on 8-bit parallel mode. Which makes it easy to interface with a USB shield using the 8-bit parallel interface. The camera has a rolling type of shutt..
₹459.00 ₹520.00
Ex GST: ₹388.98
The OV7725 camera module is based on the OmniVision OV7725 image sensor which is a low voltage CMOS device that provides the full functionality of a single-chip VGA camera and image processor, as well as the extraordinary high frame rate and low light performance. The OV7725 provides full-frame, sub..
₹1,580.00
Ex GST: ₹1,338.98
-9 %
This is a complete set for the flexible ribbon cable, which can be used to connect various camera modules with the raspberry pi. The kit has 7 different types of flexible cable extension cable lengths, which contains 5 lengths for raspberry pi with 15 pin 1.0mm pitch connector at both ends and 2 len..
₹898.99 ₹989.01
Ex GST: ₹761.86
As may you aware, Arducam has done exceptionally well in its field. After a huge success with Arducam IMX219, they come up with the upgraded version called Arducam IMX477.This IMX series is widely used in applications such as robots, time-lapse photography, and more. With 12.3 MP Camera ..
₹7,740.00
Ex GST: ₹6,559.32
Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module 4, 3+, 3
Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module 4, 3+, 3 is one of the best low-cost cameras in the market. Based on the IMX219 image sensor this camera module can get a resolution of 3280 x 2464 with frame rates up to 120fps at 720P. The camera module is ..
₹3,329.00
Ex GST: ₹2,821.19
Arducam Mini Module Camera Shield 5 MP OV5642 Camera Module for Arduino is a performance improved version compared to its predecessor Arducam-M-5MP.It not only offers the capability to add a camera interface which doesn’t have in some low-cost microcontrollers but also provides the capability to add..
₹4,149.00
Ex GST: ₹3,516.10
Arducam Mini Module Camera Shield with OV2640 and is a high definition 2MP SPI camera, which reduces the complexity of the camera control interface. It integrates 2MP CMOS image sensor OV2640 and provides miniature size, as well as the easy to use hardware interface and open source code library.The ..
₹2,749.00
Ex GST: ₹2,329.66
This is a 4 in 1 adaptor shield for the ArduCam Mini Cameras. This board is designed for using up to 4 ArduCAM-Mini Camera Boards on a single microcontroller including the Arduino, BeagleBone Black, and Raspberry Pi platform. The adaptor board can be well mated with these popular open-source h..
₹1,899.00
Ex GST: ₹1,609.32
Arducam OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board’s upper surface. This interface uses the dedicated CSI interface, which was designed especially for inter..
₹2,699.00
Ex GST: ₹2,287.29
This Arducam Pan Tilt Camera Bundle for Nvidia Jetson Xavier NX/Nano is a complete pan and tilt kit for Nvidia Jetson Xavier NX/Nano boards. The mechanism is based on the GH-S37D digital servos for faster speeds and higher torque and better holding capabilities. They are controlled via a PWM servo c..
₹6,480.01
Ex GST: ₹5,491.53
The official Rpi HQ Camera module and a C-mount lens together weigh 164g, which is the equivalent of 4 Rpi 4 boards. It’s way too heavy as an embedded camera, and your good old third hands won’t work anymore, you need something more bearable to hold the HQ camera up in proper ways, you need tripods...
₹1,248.99
Ex GST: ₹1,058.47