Search Criteria
Products meeting the search criteria
FT232RL USB to TTL 3.3V 5V Serial Adapter Module is a basic breakout board for the FTDI FT232RL USB to serial IC.The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is..
₹219.00
Ex GST: ₹185.59
Features:Chip: MCU + MPU6050.Model: GY-25.Power supply: 3-5v (internal low dropout regulator).Communication: serial communication (baud 9600,115200), IIC communication.Module Dimensions: 15.5mm x 11.5mm.2.54mm pitch.Direct Data: YAW ROLL PITCH.Heading angle (YAW) ± 180°Roll angle (ROLL) ± 180°The pi..
₹499.00
Ex GST: ₹422.88
HC12 Module is based on the SI4463 EZRadioPro family chip. This module offers a wireless data transmission and reception range of approximately 1 km in the open air. It’s a low power radio chip that is ultra-easy to use.This module has an onboard STM8S003F3P6 MCU which is communicating with the SI44..
₹469.00
Ex GST: ₹397.46
MP3-TF-16P MP3 Disk TF Card Module Serial Port is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module with battery power supply, speaker, the keypad can be used alone, or through the serial port control, as the Arduino UNO or any microcontroller with a serial p..
₹197.00
Ex GST: ₹166.95
CP2102(6-pin) USB 2.0 to TTL UART serial converter module is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port.ThisCP2102 doesn’t require any external oscillator, it onboard-board v..
₹139.00
Ex GST: ₹117.80
CP2102 Module is CP2102 based on highly integrated single-chip USB to TTL bridge IC. it requires the very minimum external components. The module has a built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART). It supports a ..
₹139.00
Ex GST: ₹117.80
IIC/I2C Interface Adapter Module is used for 16×2 LCD Display. It uses the PCF8574T IC chip which converts I2C serial data to parallel data for the LCD display. Also, this interface module simplifies connecting an Arduino to a 16×2 Liquid Crystal display using only 4 wires.Specifications and Feature..
₹71.00
Ex GST: ₹60.17
This is PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin. Adopt imported controller RS232 TTL, which can stabilize the flash with high-speed 500mA self-recovery fuse for protection.Two data transmission indicator can monitor data transfer status in real-time. Reserve 3.3V and 5V pin inter..
₹95.00
Ex GST: ₹80.51
The cable is the easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB to Serial conversion chip and at the end of the 1M cable are four-wire – red power, black ground, white RX into the USB port, and green TX out of the US..
₹139.00
Ex GST: ₹117.80
The USB to RS485 TTL Serial Converter Adapter FT232 is USB2.0 standard, backward compatible, in line with the standard RS485. It has Direction control with the use of automatic data flow control, auto distinguish and control data transfer direction with Baud rate of 300-9216000bps and automatically ..
₹329.00
Ex GST: ₹278.81
The 74HC595N is a simple 8-bit shift register IC. Simply put, this shift register is a device that allows additional inputs or outputs to be added to a microcontroller by converting data between parallel and serial formats. Your chosen microprocessor is able to communicate with The 74HC595N using se..
₹16.52
Ex GST: ₹14.00
The high-performance, low-cost CP21xx USB to UART bridge family offers a complete plug and play interface solution that includes royalty-free driver suites and a comprehensive design ecosystem that enables customers to speed time-to-market. The crystal-less operation, in-system programming memory, a..
₹99.00
Ex GST: ₹83.90
Showing 1 to 12 of 12 (1 Pages)