Search Criteria
Products meeting the search criteria
A Standard Active Alarm Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switch..
₹59.00
Ex GST: ₹50.00
This is a 2-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller.Features:Trigger mode: High levelThis relay module is 5V active lowStandard in..
₹104.01
Ex GST: ₹88.14
This is a 4-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontrollerSpecifications and Features: Trigger mode: High le..
₹178.00
Ex GST: ₹150.85
Rotary Encoder Rotary Encoder Module is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor/c..
₹89.00
Ex GST: ₹75.42
This is a 5V single Channel Relay Board Module For Arduino PIC AVR DSP ARM. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on can control it. The module is triggered, high trigger current less than 5mA, part of the 51 single-chip IO port output capability is weak, pull ..
₹68.99
Ex GST: ₹58.47
AM2302 Humicap digital temperature and humidity module is a digital output signal containing a calibrated temperature and humidity combined sensor.It uses dedicated digital modules capture technology and the temperature and humidity sensor technology to ensure that products with high reliability and..
₹319.00
Ex GST: ₹270.34
DS18B20 Temperature Sensor Module is a Digital temperature sensor DS18B20 that will tell you temperature with 9 to 12-bit resolution! Uses only 1 wire to the Arduino or other microcontroller for communication. With the One Wire protocol, you can operate a large number of these sensors from one Ardui..
₹129.00
Ex GST: ₹109.32
R307 Fingerprint Module consists of an optical fingerprint sensor, high-speed DSP processor, high-performance fingerprint alignment algorithm, high-capacity FLASH chips, and other hardware and software composition, stable performance, simple structure, with fingerprint entry, image processing, finge..
₹1,149.00
Ex GST: ₹973.73
The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH. If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time th..
₹79.00
Ex GST: ₹66.95
-250x250.jpg "Laser Transmitter Module For Arduino")
Laser Diode Modules are used in a variety of applications that require small sizes in addition to low power consumption with long operating lifetimes. Laser Diode Module is a breadboard friendly, low cost having a wavelength of 650nm, and operating voltage of 5V. The laser head is composed of ..
₹89.00
Ex GST: ₹75.42
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down. The X and Y axes are two 10k potentiometers that control 2D movement by generating anal..
₹89.00
Ex GST: ₹75.42
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.Notice that you do not..
₹89.00
Ex GST: ₹75.42
The transmitter module is very simple to operate and offers low current consumption (typical. 11mA). Data can be supplied directly from a microprocessor or encoding device, thus keeping the component count down and ensuring a low hardware cost. This hybrid RF Transceiver Module provides a complete R..
₹196.67
Ex GST: ₹166.67
This is a small buzzer module that operates around the audible 2 kHz frequency range. It is an active buzzer, which means that it produces sound by itself, without needing an external frequency generator. It can easily be used with microcontroller boards, like Arduino, without needing a dedicated PW..
₹57.82
Ex GST: ₹49.00
ADXL345 is a Breakout board for the Analog Device's ADXL345 3-axis accelerometer. The module is populated with MOSFET-based Voltage level conversion circuitry to enable you to interface with different types of microcontrollers. Apart from the above all, necessary components like decoupling capacitor..
₹119.99
Ex GST: ₹101.69
APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino.This is the same sensor that the Samsung Galaxy S5 uses and is probably one of the best gesture sensors on the market for the price.This is APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino is a small breakout ..
₹349.00
Ex GST: ₹295.76
This data logger shield provides an Arduino Uno, Leonardo, or Mega with the ability to log sensor data to an SD card with the minimum of set-up. The shield includes the very popular DS1307 battery-backed real-time clock (RTC). This RTC will keep an accurate track of the data and time for up to sever..
₹229.00
Ex GST: ₹194.07
The Bluetooth Module is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC – 05 / 06 modules. These modems work as a serial pipe. Any serial stream from 9600 to 115200 bps can be passed seamlessly from your microcontroller to your target. You will need..
₹249.00
Ex GST: ₹211.02
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module is a cheapest and tiny Atmospheric Sensor Breakout to measure barometric pressure, and temperature readings all without taking up too much space.Basically, anything you need to know about atmospheric conditions you can find out from this ..
₹99.00
Ex GST: ₹83.90
Specifically designed for the HC-SR04 Ultrasonic Sensor Module, with this Ultrasonic Sensor Mounting Case Holder you can attach the HC-SR04 module to your application such as small robots or DIY projects very quickly and conveniently.Features:Easy to install.Thickness:2.8mm – 3.1mmInner diameter: 16..
₹57.82
Ex GST: ₹49.00
CJMCU-219 is a module with the I2C interface of zero drift and bi-directional current/power monitoring and control ic. It can solve many power-monitoring problems. The device adopts the SOT23 packaging, but for the server, notebook computer, power supply, battery management, and digital electri..
₹189.00
Ex GST: ₹160.17
Features:56uA operating current, 0.5uA shutdown currentSelectable range (Via I2C)I2C (SMBus compatible) outputADC resolution 16 bitsProgrammable interrupt windowsTwo optical sensitivity ranges- Range 0 = 5.7m lux to 375 lux- Range 1 = 0.152 lux to 10,000 luxOperating power supply 2.25 to 3.63VI2C po..
₹299.00
Ex GST: ₹253.39
This is CJMCU 9900 APDS-9900 Digital Proximity And Ambient Light Sensor For Arduino. The APDS-9900 provides digital ambient light sensing (ALS), IR LED, and a complete proximity detection system in a single 8 pin package. The proximity function offers plug and plays detection to 100 mm (without fron..
₹198.00
Ex GST: ₹167.80
Correlation photoelectric Infrared count slot sensor module is a high-quality infrared Counter module at a very cheap price which comes with tiny size and integrated LM 393 chip.Features:The width of the optical coupling slot: 5mmWith a signal output indication.Single signal outputThe circuit board ..
₹129.00
Ex GST: ₹109.32
The DHT11 Temperature And Humidity Sensor Module with LED is a small humidity and temperature sensor that you can connect to your Arduino and get readings for temperature and humidity in the environment.Features:DHT11 sensor with PCB and LED indicator along with cable; 3 to 5V power and I/O, 4 pins ..
₹109.00
Ex GST: ₹92.37
FC65 12V 30A DC Optocoupler Isolated Relay Module is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V. The user can choose the relay control level, can be a ..
₹219.00
Ex GST: ₹185.59
GT-511C3 Fingerprint scanner module provides High-speed and Highly accurate Fingerprint Identification using the SmackFinger 3.0 Algorithm. The module is small and easy to mount using two mounting tabs on the side of the sensor. This is the updated version of the GT-511 which has an increased memory..
₹1,899.00
Ex GST: ₹1,609.32
1145 is a new sensor with a calibrated UV sensing element that can calculate the UV Index. It's a digital sensor that works over I2C so just about any microcontroller can use it. The sensor also has visible and IR sensing elements so you can measure just about any kind of light - but only the UV sen..
₹599.00
Ex GST: ₹507.63
The GY-271 is supposed to have an HMC5883L, but some boards have a QMC5883L which has the same basic capability, but is not compatible with the H. The GY-271 QMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor is designed for low field magnetic sensing with a digital interface and it is ..
₹247.00
Ex GST: ₹209.32
The Compass Module 3-Axis HMC5883L is a low-field magnetic sensing device with a digital interface.The compass module converts any magnetic field to a differential voltage output on 3 axes. This voltage shift is the raw digital output value, which can then be used to calculate headings or sense magn..
₹249.00
Ex GST: ₹211.02
BH1750 module is a digital ambient light sensor, IIC I2C communication. Good for Arduino light detection. It is a light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations.This is more acc..
₹232.00
Ex GST: ₹196.61
The TCS3200 Color Recognition Sensor Module uses a high-quality light sensor allowing you to sense any color through a combination of Red, Green, and Blue. The module provides all of the pins of the TCS3200 on convenient 0.1″ headers – ideal for use with PCBs, breadboard or stripboard.Four white LED..
₹299.00
Ex GST: ₹253.39
This GY-53 VL53L0X Laser ToF Flight Time Ranging Sensor Module used for easy integration into your basic gesture detection projects. The VL53L0X satellite board used in any application with a 2.8 to 5V supply.The sensor contains a very tiny invisible laser source and a matching sensor. The VL53L0X c..
₹799.00
Ex GST: ₹677.12
The Heart Rate Monitor Kit with AD8232 ECG sensor module Kit For Arduino is a cost-effective board use to measure the electrical activity of the heart. This electrical activity can be chart as an ECG or Electrocardiogram and output as an analog reading.ECGs can be extremely noisy, the AD8232 Single ..
₹829.00
Ex GST: ₹702.54
This IR Infrared Flame Sensor Module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance. It has a Detect angle of 60° and very sens..
₹126.00
Ex GST: ₹106.78
This sound/voice recorder module is base on the ISD1820 integrated circuit, which can record multiple sounds or voice messages through the on-board microphone. The audio is stored in nonvolatile memory.The sample rate and recording length can be set up by changing a resistor. The resistor R4 onboard..
₹249.99
Ex GST: ₹211.86
The LDR Sensor Module is used to detect the presence of light / measuring the intensity of light. The output of the module goes high in the presence of light and it becomes low in the absence of light. The sensitivity of signal detection can be adjusted using a potentiometer.Features :Using LM393 co..
₹89.00
Ex GST: ₹75.42
LTC3588 Energy Harvester Breakout board uses the Piezoelectric Energy Harvester from Linear Technologies. This board can be used for harvesting piezoelectric energy and solar energy.There is a bridge rectified input for piezo elements (PZ1 and PZ2) and a direct input (VIN) for DC sources. Both are c..
₹1,349.00
Ex GST: ₹1,143.22
MAX30100 is an integrated pulse oximeter and heart-rate monitor sensor solution. It’s an optical sensor that derives its readings from emitting two wavelengths of light from two LEDs – a red and an infrared one – then measuring the absorbance of pulsing blood through a photodetector. This parti..
₹258.00
Ex GST: ₹218.64
The MAX30102 provides a complete system solution to ease the design-in process for mobile and wearable devices. The MAX30102 operates on a single 1.8V power supply and a separate 5.0V power supply for the internal LEDs. Communication is through a standard I2C-compatible interface. The module can be ..
₹399.01
Ex GST: ₹338.14
The MAX6675 Thermocouple Sensor Module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide an accurate temperature-compensated measurement of the supplied K-Type thermocouple sensor.The dat..
₹298.00
Ex GST: ₹252.54
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the output of the module is low, lower power consumption; When a finger touches the corresponding position, the output of the module is high, if not touched for 12 seconds, it switches to low-pow..
₹139.00
Ex GST: ₹117.80
The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert change of conductivity to the corresponding output signal of gas concentrat..
₹140.00
Ex GST: ₹118.64
If you are searching for a Gas sensor module with a very High detection range compared to any ordinary gas sensor then this MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module will fulfill your specification demands. The MQ-2 Gas sensor detector module has a detection range of 300-10000 ppm. T..
₹140.00
Ex GST: ₹118.64
This MQ-3 Alcohol Detector Gas Sensor Module is simple to use. MQ-3 Alcohol Detector Module which can sense the presence of Alcohol in the air. The module uses our MQ-3 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides an interface through standard 4 x 0.1″ header..
₹140.00
Ex GST: ₹118.64