Search Criteria
Products meeting the search criteria
Tried connecting a 3.3V device to a 5V system, or the other way around? You should know the challenge it takes. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and..
₹44.00
Ex GST: ₹37.29
This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go.The board itself is tiny, at a..
₹470.01
Ex GST: ₹398.31
The Acrylic Adjustable Camera Mount Module for Raspberry Pi is an adjustable mount setup for the Raspberry Pi camera. These are cut out of the acrylic sheet.Raspberry Pi Camera Module Mount is a great accessory for Pi shutterbugs. The Pi camera can be attached using little screws, also the design al..
₹89.00
Ex GST: ₹75.42
Aluminum Heatsink kit is used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.Besides, the installation is simple, what you need to do is to remove the heatsink prote..
₹56.64
Ex GST: ₹48.00
SpecificationSupports native Windows Bluetooth stack (Windows XP and Vista)Bluetooth V2.0 Class 1 (class 1 is manufacturer rated)Maximum wireless distance: 100 meters (as per Bluetooth class 1 standard)Plug and playApplicationThis supermini Bluetooth 2.0 adapter dongle is very useful to convert the ..
₹135.00
Ex GST: ₹114.41
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in.Features:compatible with classic or NoIR type raspberry cameraColor: White - BlueLength: 150mm Width: 1..
₹239.00
Ex GST: ₹202.54
Night Vision Infrared LED 3W for Raspberry Pi Camera is the additional focus that can be added to your night vision surveillance camera project using Raspberry Pi. The Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera features the Onboard photoresistor for ambient light detection. Als..
₹194.00
Ex GST: ₹164.41
This Transparent case designed for the Raspberry Pi 2 B and Model B+(B Plus) to give you maximum use of the Raspberry Pi, it provides openings for all the connectors( 3.5mm Audio / Micro USB Power / HDMI Video / Ethernet/ 40 Pin GPIO/ DSI/ USB ports) and comes with four screws that will keep the cas..
₹149.00
Ex GST: ₹126.27
The official red and white enclosure from the Raspberry Pi foundation, specially designed for the Raspberry Pi 3 Model B and Model B+. The versatile design is simple to assemble and allows easy access to all the Raspberry Pi ports and controls without leaving it unprotected.FEATURES :The optional cl..
₹164.00
Ex GST: ₹138.98
Raspberry Pi 4 Case is made of strong ABS plastic material with a Red-White combination and meticulously designed for Pi 4. It will provide adequate protection for your Pi and access to all the ports. This case comes with a Raspberry LOGO engraved on the white top of the cover and Rubber pads a..
₹379.00
Ex GST: ₹321.19
This camera cable for Raspberry Pi Zero and allows the Raspberry Pi board for imaging capabilities. This Raspberry Pi camera cable is 160mm in length and is suitable for the CSI ports on the Raspberry Pi Zero board. The camera cable is a flexible ribbon cable and can easily be swapped in and out. Th..
₹99.00
Ex GST: ₹83.90
Raspberry Pi Zero Case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid, and a camera lid.It also comes with an exclusive short ribbon cable that will connect your camera module to your Raspberry Pi Zer..
₹169.00
Ex GST: ₹143.22
This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 1 GB RAM, dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capabi..
₹3,711.10
Ex GST: ₹3,145.00
The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 4 better than the 3? How about a faster processor, USB 3.0 ports, and updated Gigabit Ethernet chip with PoE capability? Good guess - t..
₹10,900.00
Ex GST: ₹9,237.29
The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 4 better than the 3? How about a faster processor, USB 3.0 ports, and updated Gigabit Ethernet chip with PoE capability? Good guess - t..
₹8,024.00
Ex GST: ₹6,800.00
After the Success of Pi Zero V1.3, Raspberry Pi has launched a new Upgraded version of Raspberry Pi Zero with inbuilt Wifi and Bluetooth. The most important part about this board is cost-effectiveness. Zero W is the Smallest in the Raspberry pi Family measures only 65mm long by 30mm wide and 5mm dee..
₹1,699.00
Ex GST: ₹1,439.83
The 18650 Battery Shield holds single-cell lithium-Ion 18650 form factor batteries which should have integrated battery protection circuits. The boost circuit maintains the voltage to the Pi at 5.1V for battery voltages of 3.7V to 4.2V. The jumper allows you to disable power to the Pi and Isola..
₹239.00
Ex GST: ₹202.54
This small 3.5 inch touch screen Raspberry Pi Display module is designed especially for Raspberry Pi, using the latest Linux Core system. This is ideal for DIY anywhere, anytime and does not require any separate power source or case to hold it. The module sits right on top of Pi and an ideal alterna..
₹1,499.00
Ex GST: ₹1,270.34
IRF520 MOSFET Driver Module is a breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller.Here is a simple breakout board for the IRF520 Mosfet. Easy hookup to your Arduino or another 3-5v microcontroller. Puls..
₹99.00
Ex GST: ₹83.90
This is CH340G USB To TTL(Serial) Converter, USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.This USB–TTL converter is based on CH340G USB to Serial TTL converter chip. The module..
₹89.00
Ex GST: ₹75.42
This HDMI VGA Converter Cable adapter is designed to transfer HDMI signal of those devices with HDMI interface, like a computer, laptop, HD-set-top-box, harddisk player, PS3, Xbox360 and tablets, to VGA signal and display it to large screen devices, such as monitors, LCD TV, Projectors. A perfect co..
₹349.00
Ex GST: ₹295.76
USB 2.0 A Male to Micro-B Male Cable with has become the new universal standard connector used on most smartphones and tablets. This cable is compatible with Arduino Boards which features Micro-B USB cable.This USB 2.0 cable features a USB A male plug on one end and a USB micro B male plug..
₹57.82
Ex GST: ₹49.00
Raspberry Pi Foundation came up with the next iteration of the Raspberry Pi 4 Model-B single-board computer. The Raspberry Pi 4 Model-B with 8GB RAM is here. It is an awesome and awaited upgrade to Pi 4 Board, isn’t it?Already the Raspberry Pi 4 Model B is launched with a pretty big upgrade fr..
₹9,440.00
Ex GST: ₹8,000.00
QUICK OVERVIEWLength: 45mmSize: 1.5, 2, 3, 4, 5, 6, 7, 8, 10Colour: Red, Yellow, Green, Blue, BlackShrink ratio: 2:1..
₹399.01
Ex GST: ₹338.14
The High Quality 1-8S Battery Voltage Checker & Low Voltage Buzzer Alarm is a quality product available and a special design to measure and display the voltage of LiPo battery packs. This voltage checker can measure the voltage of the battery pack as well as the voltage of every single cell of t..
₹159.01
Ex GST: ₹134.75
The Astro Industrial Curved 20 Semi-Circular Aluminum Alloy 2020R Anodized Profile is made of High Grade tempered Aluminium Alloy 6063 - T5. The dimensions are as per European Standard and the strucutural cross section thickness is minimum of 1.8 mm. The profile can be used for strucutural ele..
₹390.00
Ex GST: ₹330.51
Cytron 10 A Switch Control Potentiometer DC Motor Driver (MD10POT) is made for DC brushed motors which is widely used in many applications due to the ease of use. You can simply connect the motor directly to the battery and it will start rotating. However, if you wish to control the speed and direct..
₹790.00
Ex GST: ₹669.49
Showing 1 to 27 of 27 (1 Pages)