Search Criteria
Products meeting the search criteria
AVR 40 Pin development Board is ideal for learning AVR microcontrollers. This board contains requirements like LEDs, Switches, in-system programming, RS232 communication, etc. All Ports of the controller are accessible through a standard 10 pin FRC connector or simple header pins. Also, a 34*11 gene..
₹709.00
Ex GST: ₹600.85
Tried connecting a 3.3V device to a 5V system, or the other way around? You should know the challenge it takes. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and..
₹44.00
Ex GST: ₹37.29
This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go.The board itself is tiny, at a..
₹470.01
Ex GST: ₹398.31
The Acrylic Adjustable Camera Mount Module for Raspberry Pi is an adjustable mount setup for the Raspberry Pi camera. These are cut out of the acrylic sheet.Raspberry Pi Camera Module Mount is a great accessory for Pi shutterbugs. The Pi camera can be attached using little screws, also the design al..
₹89.00
Ex GST: ₹75.42
Aluminum Heatsink kit is used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.Besides, the installation is simple, what you need to do is to remove the heatsink prote..
₹56.64
Ex GST: ₹48.00
SpecificationSupports native Windows Bluetooth stack (Windows XP and Vista)Bluetooth V2.0 Class 1 (class 1 is manufacturer rated)Maximum wireless distance: 100 meters (as per Bluetooth class 1 standard)Plug and playApplicationThis supermini Bluetooth 2.0 adapter dongle is very useful to convert the ..
₹135.00
Ex GST: ₹114.41
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in.Features:compatible with classic or NoIR type raspberry cameraColor: White - BlueLength: 150mm Width: 1..
₹239.00
Ex GST: ₹202.54
Night Vision Infrared LED 3W for Raspberry Pi Camera is the additional focus that can be added to your night vision surveillance camera project using Raspberry Pi. The Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera features the Onboard photoresistor for ambient light detection. Als..
₹194.00
Ex GST: ₹164.41
This Transparent case designed for the Raspberry Pi 2 B and Model B+(B Plus) to give you maximum use of the Raspberry Pi, it provides openings for all the connectors( 3.5mm Audio / Micro USB Power / HDMI Video / Ethernet/ 40 Pin GPIO/ DSI/ USB ports) and comes with four screws that will keep the cas..
₹149.00
Ex GST: ₹126.27
The official red and white enclosure from the Raspberry Pi foundation, specially designed for the Raspberry Pi 3 Model B and Model B+. The versatile design is simple to assemble and allows easy access to all the Raspberry Pi ports and controls without leaving it unprotected.FEATURES :The optional cl..
₹164.00
Ex GST: ₹138.98
Raspberry Pi 4 Case is made of strong ABS plastic material with a Red-White combination and meticulously designed for Pi 4. It will provide adequate protection for your Pi and access to all the ports. This case comes with a Raspberry LOGO engraved on the white top of the cover and Rubber pads a..
₹379.00
Ex GST: ₹321.19
This camera cable for Raspberry Pi Zero and allows the Raspberry Pi board for imaging capabilities. This Raspberry Pi camera cable is 160mm in length and is suitable for the CSI ports on the Raspberry Pi Zero board. The camera cable is a flexible ribbon cable and can easily be swapped in and out. Th..
₹99.00
Ex GST: ₹83.90
Raspberry Pi Zero Case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid, and a camera lid.It also comes with an exclusive short ribbon cable that will connect your camera module to your Raspberry Pi Zer..
₹169.00
Ex GST: ₹143.22
This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 1 GB RAM, dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capabi..
₹3,711.10
Ex GST: ₹3,145.00
The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 4 better than the 3? How about a faster processor, USB 3.0 ports, and updated Gigabit Ethernet chip with PoE capability? Good guess - t..
₹10,900.00
Ex GST: ₹9,237.29
The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 4 better than the 3? How about a faster processor, USB 3.0 ports, and updated Gigabit Ethernet chip with PoE capability? Good guess - t..
₹8,024.00
Ex GST: ₹6,800.00
After the Success of Pi Zero V1.3, Raspberry Pi has launched a new Upgraded version of Raspberry Pi Zero with inbuilt Wifi and Bluetooth. The most important part about this board is cost-effectiveness. Zero W is the Smallest in the Raspberry pi Family measures only 65mm long by 30mm wide and 5mm dee..
₹1,699.00
Ex GST: ₹1,439.83
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays ..
₹579.00
Ex GST: ₹490.68
This is a 10K ohm Negative Temperature Coefficient (NTC) thermistor.NTC Thermistor is one of the most commonly used temperature sensors. In an NTC the resistance value decreases as the temperature increases.NTC 10K can be applied to air conditioner devices,heating devices,clinical thermometer, auto ..
₹13.99
Ex GST: ₹11.86
This is a general-purpose continuous Piezo Electric Buzzer Alarm. It works from 3 to 12 V.It has two mounting holes and can be easily mounted to a flat surface.Features:Color: BlackAlarm Diameter: Around 30mmAlarm Height: Around 10mm2 Mounting Holes Distance:35mmBuzzer Type: PiezoelectricSound Press..
₹59.00
Ex GST: ₹50.00
The 18650 Battery Shield holds single-cell lithium-Ion 18650 form factor batteries which should have integrated battery protection circuits. The boost circuit maintains the voltage to the Pi at 5.1V for battery voltages of 3.7V to 4.2V. The jumper allows you to disable power to the Pi and Isola..
₹239.00
Ex GST: ₹202.54
This small 3.5 inch touch screen Raspberry Pi Display module is designed especially for Raspberry Pi, using the latest Linux Core system. This is ideal for DIY anywhere, anytime and does not require any separate power source or case to hold it. The module sits right on top of Pi and an ideal alterna..
₹1,499.00
Ex GST: ₹1,270.34
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module is a cheapest and tiny Atmospheric Sensor Breakout to measure barometric pressure, and temperature readings all without taking up too much space.Basically, anything you need to know about atmospheric conditions you can find out from this ..
₹99.00
Ex GST: ₹83.90
This clear Bracket/case/holder for PIR Motion Sensor Detector Module HC-SR501 has two screw holes for the module to be attached to the bracket, and two to connect the bracket securely to your project.Nuts and screws are also included. The perfect accompaniment to our Pyroelectric Infrared PIR Motion..
₹55.46
Ex GST: ₹47.00
HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module is based on infrared technology, It automatically controls the products with high sensitivity, high reliability, ultra-small size, and ultra-low-voltage operation mode.It is widely used in various auto-sensing of electrical equipment,..
₹199.00
Ex GST: ₹168.64
-250x250.jpg "IRF520 MOSFET Driver Module for Arduino Raspberry pi")
IRF520 MOSFET Driver Module is a breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller.Here is a simple breakout board for the IRF520 Mosfet. Easy hookup to your Arduino or another 3-5v microcontroller. Puls..
₹99.00
Ex GST: ₹83.90
Mini IR Pyroelectric Infrared PIR Motion Human Sensor is based on the digital intelligent infrared technology, automatic control products. High sensitivity, high reliability. Widely used in various auto-sensing electrical equipment.Features:Low power consumption, small size, easy to installInternal ..
₹169.00
Ex GST: ₹143.22
The HC-SR501 PIR Motion Detector Sensor Module is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single I/O pin.The module has an onboard pyroelectric sensor, conditi..
₹89.00
Ex GST: ₹75.42
Respiratory Sensor for Arduino.Package Includes:1 x Respiratory Sensor...
₹399.01
Ex GST: ₹338.14
The W5500 is a full-featured TCP/IP embedded Ethernet controller that provides an easier Internet connection solution for embedded systems.The hardware logic gates are used to implement the transport layer and network layer of the TCP/IP protocol stack (eg TCP). , UDP, ICMP, IPv4, ARP, IGMP, PPPoE a..
₹598.00
Ex GST: ₹506.78
Single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in the Olimex development boards. They mate very well with break away headers. Specifications and Features:Number of Pins: 40Pin Spacing(pitch): 2 mmStrip Length:..
₹49.01
Ex GST: ₹41.53
This is CH340G USB To TTL(Serial) Converter, USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.This USB–TTL converter is based on CH340G USB to Serial TTL converter chip. The module..
₹89.00
Ex GST: ₹75.42
It is a 2×40 Pin Female Double Row Header Strip. It has two rows of 40 pins each. Ideal for through-hole mounting.Package Includes:1 x Female Header BurgStrip 40x2 Pin ..
₹46.02
Ex GST: ₹39.00
This HDMI VGA Converter Cable adapter is designed to transfer HDMI signal of those devices with HDMI interface, like a computer, laptop, HD-set-top-box, harddisk player, PS3, Xbox360 and tablets, to VGA signal and display it to large screen devices, such as monitors, LCD TV, Projectors. A perfect co..
₹349.00
Ex GST: ₹295.76
USB 2.0 A Male to Micro-B Male Cable with has become the new universal standard connector used on most smartphones and tablets. This cable is compatible with Arduino Boards which features Micro-B USB cable.This USB 2.0 cable features a USB A male plug on one end and a USB micro B male plug..
₹57.82
Ex GST: ₹49.00
This is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, this version is ideal for use with multi-copters and rovers. The APM 2.8 is a complete open source autopilot system and the bestselling technology that on the prestigious 2012 Outback Challenge UAV competition..
₹6,999.00
Ex GST: ₹5,931.36
CC3D EVO CopterControl Hardware FeaturesPowerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.3-axis high-performance MEMs gyros and 3-axis high-performance&n..
₹1,199.00
Ex GST: ₹1,016.10
Characteristics:Compatible with Alexmos2.2 or firmware below, compatible with the newest firmware BruGi_050 German, standard Russian2.2 firmwareTipsA new generation of strong input control 32-bit processor, a circuit board with PX4FMU + PX4IOSpecifications:32-bit Pixhawk PX4 Autopilot Open Code Fli..
₹14,960.00
Ex GST: ₹12,677.97
This PIXHAWK 2.4.8 Full Combo Kit consists of all in one required product for the drone flight controller. find all product included in this kit at below package includes.PIXHAWK PX4 2.4.8 Flight Controller is a high-performance autopilot-on-module suitable for fixed-wing, multi-rotors, helicopters,..
₹14,960.00
Ex GST: ₹12,677.97
Flight control damping plate Controller Board Anti-vibration Set Shock Absorber for APM 2.5 2.6/KK/MWC F16285Material: PLASize: 10 * 6 * 1cm (Approx)Suit for different open source flight controller, like APM 2.5/2.6, KK, MWCPackage list: 1 x Flight Controller Anti-vibration Set Shock Absorber..
₹249.00
Ex GST: ₹211.02
M6X26 1.75 Print Extruder Pipes For 3D Printer.Features:Material: Stainless SteelInner diameter: 2mmOuter thread: M6Suitable for 1.75 FilamentApplication: 3D printer extruderPackage included:1 x 3D printer extruder pipes..
₹259.00
Ex GST: ₹219.49
7805 is a voltage regulator integrated circuit. It is a member of 78xx series of fixed linear voltage regulator ICs. The voltage source in a circuit may have fluctuations and would not give the fixed voltage output. The voltage regulator IC maintains the output voltage at a constant value. The xx in..
₹10.62
Ex GST: ₹9.00
The MCP3008-I/SL is an 8 channel, 10bit Analogue to Digital (ADC) Converter with SPI interface in 16 pins SOIC package. This ADC combines high performance and low power consumption in a small package by making it as an ideal for embedded control applications. The MCP3008 features successive approxim..
₹199.00
Ex GST: ₹168.64
Specifications40-pin Low Power MicrocontrollerFlash Program Memory: 8192 bytesEEPROM Data Memory: 256 bytesSRAM Data Memory: 368 bytesI/O Pins: 33Timers: Two 8-bit / One 16-bitA/D Converter: 10-bit Eight ChannelPWM: Two 10-bit ModulesSSP: SPI and I²C SupportUSART: YesExternal Oscillator: up to 20MHz..
₹149.00
Ex GST: ₹126.27
The PIC24FJ64GB002-I/SP is a 28-pin general-purpose Flash Microcontroller with USB On-The-Go (OTG) and nanoWatt XLP technology. The 16-bit low power microcontroller with full-speed USB, 64kB flash memory, 8kB RAM and advanced peripherals. The USB On-The-Go module provides on-chip functionality as a ..
₹249.00
Ex GST: ₹211.02