Search Criteria
Products meeting the search criteria
The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. ESP8266 is a low-cost Wi-Fi chip with a full TCP/IP stack and MCU capability. It can handle all the necessary overhead for communi..
₹139.00
Ex GST: ₹117.80
This module is 5V to 3.3V TTL Bi-directional Logic Level Converter Module. 2-channel of high-voltage logic switch low voltage logic into unitary transformation.2 channels of high-voltage logic and low-voltage logic bilateral switching, This Module is compatible with the breadboard, it can..
₹34.00
Ex GST: ₹28.81
Tried connecting a 3.3V device to a 5V system, or the other way around? You should know the challenge it takes. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and..
₹44.00
Ex GST: ₹37.29
This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go.The board itself is tiny, at a..
₹470.01
Ex GST: ₹398.31
SpecificationSupports native Windows Bluetooth stack (Windows XP and Vista)Bluetooth V2.0 Class 1 (class 1 is manufacturer rated)Maximum wireless distance: 100 meters (as per Bluetooth class 1 standard)Plug and playApplicationThis supermini Bluetooth 2.0 adapter dongle is very useful to convert the ..
₹135.00
Ex GST: ₹114.41
If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, then the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get a 16-Channel 12-Bit PWM/Ser..
₹299.00
Ex GST: ₹253.39
A Standard Active Alarm Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switch..
₹59.00
Ex GST: ₹50.00
This is a 2-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller.Features:Trigger mode: High levelThis relay module is 5V active lowStandard in..
₹104.01
Ex GST: ₹88.14
This is a 4-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontrollerSpecifications and Features: Trigger mode: High le..
₹178.00
Ex GST: ₹150.85
Rotary Encoder Rotary Encoder Module is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor/c..
₹89.00
Ex GST: ₹75.42
This is a 5V single Channel Relay Board Module For Arduino PIC AVR DSP ARM. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on can control it. The module is triggered, high trigger current less than 5mA, part of the 51 single-chip IO port output capability is weak, pull ..
₹68.99
Ex GST: ₹58.47
AM2302 Humicap digital temperature and humidity module is a digital output signal containing a calibrated temperature and humidity combined sensor.It uses dedicated digital modules capture technology and the temperature and humidity sensor technology to ensure that products with high reliability and..
₹319.00
Ex GST: ₹270.34
DS18B20 Temperature Sensor Module is a Digital temperature sensor DS18B20 that will tell you temperature with 9 to 12-bit resolution! Uses only 1 wire to the Arduino or other microcontroller for communication. With the One Wire protocol, you can operate a large number of these sensors from one Ardui..
₹129.00
Ex GST: ₹109.32
R307 Fingerprint Module consists of an optical fingerprint sensor, high-speed DSP processor, high-performance fingerprint alignment algorithm, high-capacity FLASH chips, and other hardware and software composition, stable performance, simple structure, with fingerprint entry, image processing, finge..
₹1,149.00
Ex GST: ₹973.73
The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH. If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time th..
₹79.00
Ex GST: ₹66.95
IIC/I2C 1602 Yellow-Green Backlight LCD Display Module For ArduinoParameter:Power supply voltage: +5 vSupport the I2CWith the Blue backlight, and contrast to adjust potentiometerFour line output more simplerPackage included:1 x LCD Display Module with Backlight..
₹230.01
Ex GST: ₹194.92
-250x250.jpg "Laser Transmitter Module For Arduino")
Laser Diode Modules are used in a variety of applications that require small sizes in addition to low power consumption with long operating lifetimes. Laser Diode Module is a breadboard friendly, low cost having a wavelength of 650nm, and operating voltage of 5V. The laser head is composed of ..
₹89.00
Ex GST: ₹75.42
This is an Optical slot speed measuring sensor for Arduino. Widely used in motor speed detection, pulse count, the position limit, etc.The DO output interface can be directly connected to a micro-controller IO port if there is a block detection sensor, such as the speed of the motor encoder can dete..
₹92.00
Ex GST: ₹77.97
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down. The X and Y axes are two 10k potentiometers that control 2D movement by generating anal..
₹89.00
Ex GST: ₹75.42
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.Notice that you do not..
₹89.00
Ex GST: ₹75.42
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays ..
₹579.00
Ex GST: ₹490.68
RFID Card used for Contactless transmission of data and supplies energy without battery. it works on the frequency of 125khz. Package Content:10 x RFID Card tag..
₹175.01
Ex GST: ₹148.31
This is a 13.56MHz RFID IC Key Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications. Operating on a frequency of 13.56MHz, these tokens are all pre-programmed with unique ID numbers to commu..
₹24.00
Ex GST: ₹20.34
This is a 3W High Power LED Module for Arduino.Specifications:1. Type: LED High Power Board2. Material: PCB3. Mainly Compatible with: Ardunio4. 3W LED High Power Board for Indoor / Outdoor DisplayFeature:Color temperature: Warm White 3000-3200K / white 6000-6500KForward current: 700MALuminous f..
₹139.00
Ex GST: ₹117.80
This is a 4 Channel Infrared Tracing Module.Features:Detection range: 1mm to 60 CM adjustable, the closer the performance more stable, white reflects the farthest distance.Size: in the control panel:42 x 38 x 12mm (length x width x height).Small forward: 25 x 12 x 12mm (length x width..
₹149.00
Ex GST: ₹126.27
The transmitter module is very simple to operate and offers low current consumption (typical. 11mA). Data can be supplied directly from a microprocessor or encoding device, thus keeping the component count down and ensuring a low hardware cost. This hybrid RF Transceiver Module provides a complete R..
₹196.67
Ex GST: ₹166.67
This 5V 2 Channel SSR – Solid State Relay Module 240V 2A Output. SSR relay which can control up to 2A at 240VAC. This is a 2 Channel SSR relay module which has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).FEATURES:Compact sizeTotally silent operationLed indicat..
₹259.00
Ex GST: ₹219.49
This 5V 4 Channel SSR – Solid State Relay Module 240V 2A Output. SSR relay which can control up to 2A at 240VAC. This is a 4 Channel SSR relay module which has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).FEATURES:Compact sizeTotally silent operationLed indicat..
₹469.00
Ex GST: ₹397.46
It is an 8 Channel Isolated 5V 10A Relay Module, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other types of equipment with a large current. Relay output maximum contact is AC250V 10A ..
₹399.01
Ex GST: ₹338.14
8 Channel Bi-Directional Logic Level Converter Module is a Bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices.What really separates this Logic level conv..
₹68.00
Ex GST: ₹57.63
This is a small buzzer module that operates around the audible 2 kHz frequency range. It is an active buzzer, which means that it produces sound by itself, without needing an external frequency generator. It can easily be used with microcontroller boards, like Arduino, without needing a dedicated PW..
₹57.82
Ex GST: ₹49.00
This is a High Precision Signal Amplifier Board/Voltage Amplifier Module based upon AD620 Instrumentation amplifier IC, Input voltage range: DC 3~12V, Amplification: adjustable 1.5~1000 times, Adjustable zero to improve accuracy. Can be used for AC, DC signal amplification.1: Wide input range - This..
₹949.00
Ex GST: ₹804.24
The ADXL335 is low power, a complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module is a 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications,..
₹299.00
Ex GST: ₹253.39
ADXL345 is a Breakout board for the Analog Device's ADXL345 3-axis accelerometer. The module is populated with MOSFET-based Voltage level conversion circuitry to enable you to interface with different types of microcontrollers. Apart from the above all, necessary components like decoupling capacitor..
₹119.99
Ex GST: ₹101.69
APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino.This is the same sensor that the Samsung Galaxy S5 uses and is probably one of the best gesture sensors on the market for the price.This is APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino is a small breakout ..
₹349.00
Ex GST: ₹295.76
This data logger shield provides an Arduino Uno, Leonardo, or Mega with the ability to log sensor data to an SD card with the minimum of set-up. The shield includes the very popular DS1307 battery-backed real-time clock (RTC). This RTC will keep an accurate track of the data and time for up to sever..
₹229.00
Ex GST: ₹194.07
The Bluetooth Module is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC – 05 / 06 modules. These modems work as a serial pipe. Any serial stream from 9600 to 115200 bps can be passed seamlessly from your microcontroller to your target. You will need..
₹249.00
Ex GST: ₹211.02
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module is a cheapest and tiny Atmospheric Sensor Breakout to measure barometric pressure, and temperature readings all without taking up too much space.Basically, anything you need to know about atmospheric conditions you can find out from this ..
₹99.00
Ex GST: ₹83.90
Specifically designed for the HC-SR04 Ultrasonic Sensor Module, with this Ultrasonic Sensor Mounting Case Holder you can attach the HC-SR04 module to your application such as small robots or DIY projects very quickly and conveniently.Features:Easy to install.Thickness:2.8mm – 3.1mmInner diameter: 16..
₹57.82
Ex GST: ₹49.00
CJMCU-219 is a module with the I2C interface of zero drift and bi-directional current/power monitoring and control ic. It can solve many power-monitoring problems. The device adopts the SOT23 packaging, but for the server, notebook computer, power supply, battery management, and digital electri..
₹189.00
Ex GST: ₹160.17
Features:56uA operating current, 0.5uA shutdown currentSelectable range (Via I2C)I2C (SMBus compatible) outputADC resolution 16 bitsProgrammable interrupt windowsTwo optical sensitivity ranges- Range 0 = 5.7m lux to 375 lux- Range 1 = 0.152 lux to 10,000 luxOperating power supply 2.25 to 3.63VI2C po..
₹299.00
Ex GST: ₹253.39
This is CJMCU 9900 APDS-9900 Digital Proximity And Ambient Light Sensor For Arduino. The APDS-9900 provides digital ambient light sensing (ALS), IR LED, and a complete proximity detection system in a single 8 pin package. The proximity function offers plug and plays detection to 100 mm (without fron..
₹198.00
Ex GST: ₹167.80
Correlation photoelectric Infrared count slot sensor module is a high-quality infrared Counter module at a very cheap price which comes with tiny size and integrated LM 393 chip.Features:The width of the optical coupling slot: 5mmWith a signal output indication.Single signal outputThe circuit board ..
₹129.00
Ex GST: ₹109.32
The DHT11 Temperature And Humidity Sensor Module with LED is a small humidity and temperature sensor that you can connect to your Arduino and get readings for temperature and humidity in the environment.Features:DHT11 sensor with PCB and LED indicator along with cable; 3 to 5V power and I/O, 4 pins ..
₹109.00
Ex GST: ₹92.37
The DS1307 real-time clock (RTC) IC is an 8 pin device using an I2C interface. The DS1307 is a low-power clock/calendar with 56 bytes of battery backup SRAM. The main advantage of RTC is that they have an arrangement of battery back up which keeps the clock/calendar running even if there is a power ..
₹99.00
Ex GST: ₹83.90