Search Criteria
Products meeting the search criteria
AVR 40 Pin development Board is ideal for learning AVR microcontrollers. This board contains requirements like LEDs, Switches, in-system programming, RS232 communication, etc. All Ports of the controller are accessible through a standard 10 pin FRC connector or simple header pins. Also, a 34*11 gene..
₹709.00
Ex GST: ₹600.85
Aluminum Heatsink kit is used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.Besides, the installation is simple, what you need to do is to remove the heatsink prote..
₹56.64
Ex GST: ₹48.00
It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product. This is the most complete performance starter kit with all the essential Arduino sensors.FEATURES: For beginners who are interested in Ardu..
₹1,699.00
Ex GST: ₹1,439.83
Rotary Encoder Rotary Encoder Module is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor/c..
₹89.00
Ex GST: ₹75.42
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down. The X and Y axes are two 10k potentiometers that control 2D movement by generating anal..
₹89.00
Ex GST: ₹75.42
RFID Card used for Contactless transmission of data and supplies energy without battery. it works on the frequency of 125khz. Package Content:10 x RFID Card tag..
₹175.01
Ex GST: ₹148.31
This is a 10K ohm Negative Temperature Coefficient (NTC) thermistor.NTC Thermistor is one of the most commonly used temperature sensors. In an NTC the resistance value decreases as the temperature increases.NTC 10K can be applied to air conditioner devices,heating devices,clinical thermometer, auto ..
₹13.99
Ex GST: ₹11.86
This load cell (sometimes called a pressure gauge) can translate up to 10kg of stress (force) into an electric signal. Each load cell can measure the electrical resistance that changes in response to, and proportionality of, the strain (e.g. pressure or force) applied to the pub.With this gauge, you..
₹329.00
Ex GST: ₹278.81
The Keypad 4x3 features a total of 12 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 7-pin berg connector is provided for interfacing it with your microcontroller circuits. Convenient adhesive backing provides a simple way to mount the keypad in a variety of applica..
₹89.00
Ex GST: ₹75.42
This 12V Cabinet Door Electromagnetic Solenoid Lock can be used for locking sell-machine, storage shelf, file cabinet and etc. It is steady, durable, and energy-saving and had a long lifespan. In the anti-theft and shockproof design, the lock is better than other kinds of locks. After connecti..
₹499.00
Ex GST: ₹422.88
This is a 13.56MHz RFID IC Key Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications. Operating on a frequency of 13.56MHz, these tokens are all pre-programmed with unique ID numbers to commu..
₹24.00
Ex GST: ₹20.34
This Matrix Keypad 4 X 4 has 16 buttons, arranged in a telephone-line 3x4 grid with a column of 4 characters (A, B, C, and D). The keys are connected into a matrix, hence only 8 microcontroller pins (4-columns and 4-rows) are required to scan the pad. This 16-button keypad provid..
₹99.00
Ex GST: ₹83.90
ADMP401 MEMS Microphone Breakout Module is a tiny breakout board which features the ADMP401 MEMs microphone. One of the key advantages of this breakout and microphone is the bottom ported input. This means the microphone’s input can fit flush against the enclosure of your project. Plus you will..
₹649.00
Ex GST: ₹550.00
ADXL345 is a Breakout board for the Analog Device's ADXL345 3-axis accelerometer. The module is populated with MOSFET-based Voltage level conversion circuitry to enable you to interface with different types of microcontrollers. Apart from the above all, necessary components like decoupling capacitor..
₹119.99
Ex GST: ₹101.69
APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino.This is the same sensor that the Samsung Galaxy S5 uses and is probably one of the best gesture sensors on the market for the price.This is APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino is a small breakout ..
₹349.00
Ex GST: ₹295.76
5 Channel Line Tracking Sensor Module (BFD-1000) is a sensor board designed for use with line follower robots. This module has been sufficient to meet the day-to-day task of tracking, but also with the infrared distance sensor and touch detection sensor, the board makes your robot design able to ada..
₹247.00
Ex GST: ₹209.32
This clear Bracket/case/holder for PIR Motion Sensor Detector Module HC-SR501 has two screw holes for the module to be attached to the bracket, and two to connect the bracket securely to your project.Nuts and screws are also included. The perfect accompaniment to our Pyroelectric Infrared PIR Motion..
₹55.46
Ex GST: ₹47.00
The DS1307 real-time clock (RTC) IC is an 8 pin device using an I2C interface. The DS1307 is a low-power clock/calendar with 56 bytes of battery backup SRAM. The main advantage of RTC is that they have an arrangement of battery back up which keeps the clock/calendar running even if there is a power ..
₹99.00
Ex GST: ₹83.90
DS3231 Mini RTC is a Mini Real-Time Clock module designs for Raspberry Pi, but it also can be used to Arduino. DS3231 RTC IC Self-adjust 3.3V and 5V.Provide battery backup for continuous timing, Low-power consumption. Complete clock functions include seconds, minutes, hours, day, date, month, and ye..
₹127.99
Ex GST: ₹108.47
In Stock
DS3231 Module is a high precise I2C real-time clock Module. This module made using AT24C32 and DS3231 RTC EEPROM integrated. It also has a built-in comparator which monitors the status of VCC to detect power failures and to automatically switch to the backup power supply. AT24C32 provides ..
₹109.00
Ex GST: ₹92.37
The E18-D80NK Adjustable Infrared Sensor Switch 3-80cm is a set of transmitter and receiver in one of the photoelectric switch sensor. The sensor has a detection range of 3-80cm. The detection distance can be adjusted according to the demand.The Adjustable Infrared Sensor Switch is small, easy..
₹225.00
Ex GST: ₹190.68
MindLink Smart Headset Brainwave Sensor Head Band is an affordable and portable Brain-Computer Interface Headset that builds a wireless connection between the human brain and devices such as smartphones and tablets.Unlike any mainstream medical brainwave sensing devices that require several wet elec..
₹4,999.00
Ex GST: ₹4,236.44
This is Adapter Breakout Board for ESP-32F ESP32 ESP-Wroom-32 Wireless Bluetooth Module. Adapter Board Pinboard Converter for ESP-32S ESP32S ESP32 Wireless WIFI Module 2.54mm. This is an adapter board for ESP-32S Wireless Module. It can be inserted into the breadboard with Dupont cable wire. Conveni..
₹56.64
Ex GST: ₹48.00
The Arduino Ethernet Shield allows an Arduino or Arduino compatible board to connect to the internet. It is based on the Wiznet W5100 ethernet chip providing a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sk..
₹499.00
Ex GST: ₹422.88
The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives.Interfacing to most microcontrollers is straightforward: the si..
₹477.99
Ex GST: ₹405.08
Specifications:Operating voltage: 5V DC from Arduino board.Compatibility with Arduino Uno, Arduino Mega 2560.Package Includes:1 x GPS SKG13C Shield with GPS Antenna...
₹1,499.00
Ex GST: ₹1,270.34
The Heart Rate Monitor Kit with AD8232 ECG sensor module Kit For Arduino is a cost-effective board use to measure the electrical activity of the heart. This electrical activity can be chart as an ECG or Electrocardiogram and output as an analog reading.ECGs can be extremely noisy, the AD8232 Single ..
₹829.00
Ex GST: ₹702.54
Features:Operating Voltage: 4.5V-5.5VA memory mapping and multi-function LED controller driverMax display segment: 16 ×8(128 patterns), with a 13 ×3 matrix key scan circuitSuitable for multiple LED applications because of the software configuration featuresCompatible with most Microcontroller Units(..
₹199.00
Ex GST: ₹168.64
This Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low. Feature and Specification:EYE BLINK indication by LEDInstant output digital signal for directly Connecting to t..
₹399.01
Ex GST: ₹338.14
This sound/voice recorder module is base on the ISD1820 integrated circuit, which can record multiple sounds or voice messages through the on-board microphone. The audio is stored in nonvolatile memory.The sample rate and recording length can be set up by changing a resistor. The resistor R4 onboard..
₹249.99
Ex GST: ₹211.86
KQ-330 Power Line Carrier module is designed to communicate between two devices through Power line (e.g 220V power line) without any extra components.The PLC can transmit the broadband data via the power lines, which are suitable for either residential (at-home) or commercial (offices, apartmen..
₹1,499.00
Ex GST: ₹1,270.34
The KY-005 Infrared Transmitter Module consists of just a 5mm IR LED. It works together with the KY-022 IR receiver module. Compatible with popular electronics platforms like Arduino, Raspberry Pi, and ESP8266.Features:This is a 38KHz Infrared IR transmitter sensor module For ArduinoTransmit 38KHz m..
₹79.00
Ex GST: ₹66.95
KY-010 Photo Interrupter Module for Arduino will trigger a signal when light between the sensor's gap is blocked.KY-010 Photo Interrupter module consists of an optical emitter/detector in the front and two resistors (1 kΩ and 33 Ω) in the back. The sensor uses a beam of light between de e..
₹149.00
Ex GST: ₹126.27
KY-011 5mm Two-color LED module for Arduino emits red and green light. You can adjust the amount of each color using PWM. Products are widely used in many areas, electronic dictionary, PDA, MP3, headphones, digital cameras, VCD, DVD, car audio, communication, computer, charger, power amplifier, inst..
₹54.00
Ex GST: ₹45.76
KY-013 Analog Temperature Module is based on the thermistor (resistance increases with the ambient temperature changes) which sense the real-time temperature of the surrounding environment changes. Change in temperature data in analog form can be taken from this module on analog IO pins, then throug..
₹49.01
Ex GST: ₹41.53
KY-017 Mercury Sensor Module consists of a mercury switch, a 680Ω resistor, and a LED that will light up when tilt is detected. The mercury ball will open/close the circuit when the module is rotated.The Mercury switch module and digital 13 interfaces come with LED to build a simple circuit, th..
₹49.01
Ex GST: ₹41.53
KY-025 Reed Sensor Module, an electrical switch consisting of a pair of contacts on ferrous metal reeds. It gets operated by the applied magnetic field. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic ..
₹68.99
Ex GST: ₹58.47
KY-029 3mm Two-color LED module for Arduino emits red and green light. You can adjust the amount of each color using PWM.Features:Diameter:3mmPackage-Type:DiffusionColor:Red + GreenLuminosity Intensity (MCD)Package Includes:1 x KY-029 3mm Two-Color LED Module...
₹49.01
Ex GST: ₹41.53
A compact but high-powered DC-DC step-up (boost) power supply converter module. The module features a wide operating supply range and a power supply input voltage between 3.5 to 35V that can step-up this input voltage from 4V to 35V.The module includes an integrated voltage meter that can measure bo..
₹699.00
Ex GST: ₹592.37
LTC3588 Energy Harvester Breakout board uses the Piezoelectric Energy Harvester from Linear Technologies. This board can be used for harvesting piezoelectric energy and solar energy.There is a bridge rectified input for piezo elements (PZ1 and PZ2) and a direct input (VIN) for DC sources. Both are c..
₹1,349.00
Ex GST: ₹1,143.22
MAX6675 Module with K Type Thermocouple Sensor Measure 1024°C Temperature sensor makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface for giving an accurate temperature-compensated measurement of the supplied K-Type th..
₹366.00
Ex GST: ₹310.17
Description:Materials: Thin Film PackagingPerformance: PrecisionRating: 1 (W)Frequency characteristics: Low FrequencyTemperature coefficient: NTCSize: 25mmFeature:MF5B series products for synthetic fuses thin-film encapsulation typeInsulating film packaging, thermal speed, high sensitivityGood stabi..
₹79.00
Ex GST: ₹66.95
MQ2 Gas Sensor is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, smoke, and so on. Based on its fast response time measurements can be taken as soon as possible. Also, the sensitivity can be adjusted by the potentiometer. MQ2 gas..
₹119.00
Ex GST: ₹100.85
If you are searching for a Gas sensor module with a very High detection range compared to any ordinary gas sensor then this MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module will fulfill your specification demands. The MQ-2 Gas sensor detector module has a detection range of 300-10000 ppm. T..
₹140.00
Ex GST: ₹118.64
This is a monochrome LCD module comprised of 84x48 pixels that can be used to display rich graphics and text content. Though it's an industrial module, this LCD display is extremely easy to use. This module is a revision that accepts 3-5v input. So no extra level shifter is needed. To have full cont..
₹229.00
Ex GST: ₹194.07