Search Criteria
Products meeting the search criteria
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays ..
₹579.00
Ex GST: ₹490.68
CJMCU-219 is a module with the I2C interface of zero drift and bi-directional current/power monitoring and control ic. It can solve many power-monitoring problems. The device adopts the SOT23 packaging, but for the server, notebook computer, power supply, battery management, and digital electri..
₹189.00
Ex GST: ₹160.17
Features:56uA operating current, 0.5uA shutdown currentSelectable range (Via I2C)I2C (SMBus compatible) outputADC resolution 16 bitsProgrammable interrupt windowsTwo optical sensitivity ranges- Range 0 = 5.7m lux to 375 lux- Range 1 = 0.152 lux to 10,000 luxOperating power supply 2.25 to 3.63VI2C po..
₹299.00
Ex GST: ₹253.39
MCP23017 is a high-speed IIC interface. It supports the IIC frequency of 100KHz, 400KHz, and 1.7MHz. The chip has 3 address pins, which can set up to 8 different addresses. So 8 modules can be connected through two IIC buses to achieve up to 128 IO extensions.This module is flexible in configuration..
₹399.01
Ex GST: ₹338.14
The W5500 is a full-featured TCP/IP embedded Ethernet controller that provides an easier Internet connection solution for embedded systems.The hardware logic gates are used to implement the transport layer and network layer of the TCP/IP protocol stack (eg TCP). , UDP, ICMP, IPv4, ARP, IGMP, PPPoE a..
₹598.00
Ex GST: ₹506.78
IIC/I2C Interface Adapter Module is used for 16×2 LCD Display. It uses the PCF8574T IC chip which converts I2C serial data to parallel data for the LCD display. Also, this interface module simplifies connecting an Arduino to a 16×2 Liquid Crystal display using only 4 wires.Specifications and Feature..
₹71.00
Ex GST: ₹60.17
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply EIA-232 voltage levels from a single 5-V supply. Each receiver converts EIA-232 inputs to 5-V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V and a typical hysteresis of 0.5 V and ca..
₹46.02
Ex GST: ₹39.00
The MCP3008-I/SL is an 8 channel, 10bit Analogue to Digital (ADC) Converter with SPI interface in 16 pins SOIC package. This ADC combines high performance and low power consumption in a small package by making it as an ideal for embedded control applications. The MCP3008 features successive approxim..
₹199.00
Ex GST: ₹168.64
Showing 1 to 8 of 8 (1 Pages)