Search Criteria
Products meeting the search criteria
If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, then the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get a 16-Channel 12-Bit PWM/Ser..
₹299.00
Ex GST: ₹253.39
The 5-36v Switch Drive High-power MOSFET Trigger Module is of high power MOS trigger switch driver module and control board with a field-effect tube to adjust the electronic switch. It adopts imported double MOS parallel active output to show lower internal resistance, greater electric current,..
₹149.00
Ex GST: ₹126.27
Features:Operating Voltage: 4.5V-5.5VA memory mapping and multi-function LED controller driverMax display segment: 16 ×8(128 patterns), with a 13 ×3 matrix key scan circuitSuitable for multiple LED applications because of the software configuration featuresCompatible with most Microcontroller Units(..
₹199.00
Ex GST: ₹168.64
-250x250.jpg "IRF520 MOSFET Driver Module for Arduino Raspberry pi")
IRF520 MOSFET Driver Module is a breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller.Here is a simple breakout board for the IRF520 Mosfet. Easy hookup to your Arduino or another 3-5v microcontroller. Puls..
₹99.00
Ex GST: ₹83.90
The L9110S Dual Channel Motor Driver Module is a compact board that can be used to drive very small robots.This tiny module has two independent L9110S motor driver chips which can each drive up to 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be use..
₹98.00
Ex GST: ₹83.05
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors.To simplify use as two bridges each pair of chann..
₹119.00
Ex GST: ₹100.85
L293D use 16 pin DIP package, its internal integration is bipolar H - bridge circuit.This kind of bipolar pulse width method has many advantages, such as the current continuous, or microcurrent vibration when the motor stops, which as a lubrication effect. It can eliminate the dead zone of static fr..
₹169.00
Ex GST: ₹143.22
L298N 2A Based Motor Driver is a high power motor driver perfect for driving DC Motors and Stepper Motors.It uses the popular L298 motor driver IC and has an onboard 5V regulator which it can supply to an external circuit. It can control up to 4 DC motors, or 2 DC motors with directional and speed c..
₹164.00
Ex GST: ₹138.98
Specification:If jumper is hit the position of ON DP, that means 16 segment (4988) or 32 segment (8825)Jm connected motorconnect 5v and 9v power supplyE, S, D, G, respectively corresponding to the connection of the Enable/Step/Dir/Gnd drive signal outputPackage included:1 x A4988 / DRV8825 Stepper ..
₹109.00
Ex GST: ₹92.37
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with a built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional c..
₹109.00
Ex GST: ₹92.37
Description:L293D Motor Driver Module is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L293 motor driver IC. It can drive 4 DC motors on and off, or drive 2 DC motors with directional and speed control.The driver greatly simplifies and increases th..
₹109.00
Ex GST: ₹92.37
Part No:L293DPin No: 16 pinsPackage included:1 x L293D Driver IC..
₹59.00
Ex GST: ₹50.00
Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A. Use eight high-speed Schottky diodes at the motor output as protection. Stack design can be directly plugged into the Arduino, easier to use.The L298P shield DC motor driv..
₹799.00
Ex GST: ₹677.12
The TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor driver board is for axis control with Input signal high-speed optocoupler isolation, the large heat sink to ensure good heat dissipation. Stepper motor driver is Semi-flow mode adjustable, semi-flow current adjustable, with..
₹449.00
Ex GST: ₹380.51
TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal.TB6600 Arduino stepper motor driver has a wide range of power in..
₹649.00
Ex GST: ₹550.00
This is the ULN2003 Driver Module Stepper Motor Driver Board for driving and controlling stepper motors.ULN2003 Stepper Motor Driver Board uses the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor (5v-12v).It’s easy to use Arduino or another development platform to drive the stepp..
₹72.00
Ex GST: ₹61.02
DESCRIPTION:-The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. The current drive to the LEDs is regulated and programmable, eliminating the need for ..
₹49.01
Ex GST: ₹41.53
The MAX7219CNG is a compact, serial input/output common-cathode display driver that can interface microprocessors to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit dri..
₹99.00
Ex GST: ₹83.90
The High Quality 1-8S Battery Voltage Checker & Low Voltage Buzzer Alarm is a quality product available and a special design to measure and display the voltage of LiPo battery packs. This voltage checker can measure the voltage of the battery pack as well as the voltage of every single cell of t..
₹159.01
Ex GST: ₹134.75
The Astro Industrial Curved 20 Semi-Circular Aluminum Alloy 2020R Anodized Profile is made of High Grade tempered Aluminium Alloy 6063 - T5. The dimensions are as per European Standard and the strucutural cross section thickness is minimum of 1.8 mm. The profile can be used for strucutural ele..
₹390.00
Ex GST: ₹330.51
Cytron 10 A Switch Control Potentiometer DC Motor Driver (MD10POT) is made for DC brushed motors which is widely used in many applications due to the ease of use. You can simply connect the motor directly to the battery and it will start rotating. However, if you wish to control the speed and direct..
₹790.00
Ex GST: ₹669.49
Showing 1 to 21 of 21 (1 Pages)