Search Criteria
Products meeting the search criteria
This module is 5V to 3.3V TTL Bi-directional Logic Level Converter Module. 2-channel of high-voltage logic switch low voltage logic into unitary transformation.2 channels of high-voltage logic and low-voltage logic bilateral switching, This Module is compatible with the breadboard, it can..
₹34.00
Ex GST: ₹28.81
Tried connecting a 3.3V device to a 5V system, or the other way around? You should know the challenge it takes. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and..
₹44.00
Ex GST: ₹37.29
8 Channel Bi-Directional Logic Level Converter Module is a Bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices.What really separates this Logic level conv..
₹68.00
Ex GST: ₹57.63
FT232RL USB to TTL 3.3V 5V Serial Adapter Module is a basic breakout board for the FTDI FT232RL USB to serial IC.The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is..
₹219.00
Ex GST: ₹185.59
The LM2577 3A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module is a 150 kHz fixed frequency PWM buck (step-down) DC/DC module. Requiring a minimum number of external components, these regulators are cost-effective, and simple to use.This version of the LM2577 DC-DC step-up..
₹499.00
Ex GST: ₹422.88
A compact but high-powered DC-DC step-up (boost) power supply converter module. The module features a wide operating supply range and a power supply input voltage between 3.5 to 35V that can step-up this input voltage from 4V to 35V.The module includes an integrated voltage meter that can measure bo..
₹699.00
Ex GST: ₹592.37
CP2102 Module is CP2102 based on highly integrated single-chip USB to TTL bridge IC. it requires the very minimum external components. The module has a built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART). It supports a ..
₹139.00
Ex GST: ₹117.80
DC-DC Step-down Adjustable Constant Voltage Module can be used to get adjustable output voltage ranges. The module provides a wide range of current output up to 12 A. With the heat sink mounted it can easily manage to run high power applications continuously (provided that for continuous high power ..
₹369.00
Ex GST: ₹312.71
The LM317 DC-DC converter is an electronic circuit for converting a DC source voltage from one level to a lower level. This module is important in some portable electronic devices such as cell phones and laptops, which are primarily supplied by power from batteries.The step-down voltage can be easil..
₹99.00
Ex GST: ₹83.90
The MAX485 TTL To RS485 Module converts the TTL signal to RS485 for long-range, high data rate error-prone differential communication. Digital communications networks implementing the EIA-485 standard can be used effectively over long distances and in electrically noisy environments.Multiple receive..
₹89.00
Ex GST: ₹75.42
The Mini360 buck converter step down voltage regulator board is designed for use with RC airplanes, quadcopters, drones, RC cars, Arduino and other micro-controllers, and other DIY electronics needing an ultra-miniature, lightweight step-down voltage regulator.It uses an integrally molded power indu..
₹84.00
Ex GST: ₹71.19
The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra-small adjustable 0.8V to 20V output DC to DC step-down Buck converter uses an MP1584EN high-frequency switching regulator and integrated high voltage power MOSFET.It features soft start, thermal shutdown, and under-voltage lockout (UVLO) to pr..
₹98.00
Ex GST: ₹83.05
This is PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin. Adopt imported controller RS232 TTL, which can stabilize the flash with high-speed 500mA self-recovery fuse for protection.Two data transmission indicator can monitor data transfer status in real-time. Reserve 3.3V and 5V pin inter..
₹95.00
Ex GST: ₹80.51
The cable is the easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB to Serial conversion chip and at the end of the 1M cable are four-wire – red power, black ground, white RX into the USB port, and green TX out of the US..
₹139.00
Ex GST: ₹117.80
Fixed 5V Output Boost Regulator (step-up regulator) Module with standard USB Connector.Accepts Input voltage from 0.9V to up to 5V.Features:On-board CE8301 ChipInput voltage: 0.9V-5V DCPFM Control DC-DC ConverterTransfer efficiency: 96%(max)With USB portWith working indicator lightwith one AA batter..
₹99.00
Ex GST: ₹83.90
XL4015 module is a 180 kHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 0-5A (Max) Adjustable load with high efficiency, low ripple, and excellent line and load regulation. Use as a step-down module with overcurrent protection capabilities.This module has an adjustable out..
₹299.00
Ex GST: ₹253.39
Showing 1 to 16 of 16 (1 Pages)