Search Criteria
Products meeting the search criteria
This module is 5V to 3.3V TTL Bi-directional Logic Level Converter Module. 2-channel of high-voltage logic switch low voltage logic into unitary transformation.2 channels of high-voltage logic and low-voltage logic bilateral switching, This Module is compatible with the breadboard, it can..
₹34.00
Ex GST: ₹28.81
Tried connecting a 3.3V device to a 5V system, or the other way around? You should know the challenge it takes. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and..
₹44.00
Ex GST: ₹37.29
If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, then the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get a 16-Channel 12-Bit PWM/Ser..
₹299.00
Ex GST: ₹253.39
This is a 2-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller.Features:Trigger mode: High levelThis relay module is 5V active lowStandard in..
₹104.01
Ex GST: ₹88.14
This is a 4-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontrollerSpecifications and Features: Trigger mode: High le..
₹178.00
Ex GST: ₹150.85
The sensor can sense changes in body angle.Adjustable sensitivity (shown in blue digital potentiometer adjustment).With a fixed bolt hole for easy installation.Power indicator (red) and the digital switch output indicator (green).Using LM393 comparator chip, stable.Features:On-board LM393 voltage co..
₹169.00
Ex GST: ₹143.22
This is a 4 Channel Infrared Tracing Module.Features:Detection range: 1mm to 60 CM adjustable, the closer the performance more stable, white reflects the farthest distance.Size: in the control panel:42 x 38 x 12mm (length x width x height).Small forward: 25 x 12 x 12mm (length x width..
₹149.00
Ex GST: ₹126.27
A flame detector is a sensor designed to detect and respond to the presence of a flame or fire in a larger area, allowing flame detection. A flame detector can often respond faster and more accurately than a smoke or heat detector due to the mechanisms it uses to detect the flame. Re..
₹359.00
Ex GST: ₹304.24
This 5V 2 Channel SSR – Solid State Relay Module 240V 2A Output. SSR relay which can control up to 2A at 240VAC. This is a 2 Channel SSR relay module which has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).FEATURES:Compact sizeTotally silent operationLed indicat..
₹259.00
Ex GST: ₹219.49
This 5V 4 Channel SSR – Solid State Relay Module 240V 2A Output. SSR relay which can control up to 2A at 240VAC. This is a 4 Channel SSR relay module which has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).FEATURES:Compact sizeTotally silent operationLed indicat..
₹469.00
Ex GST: ₹397.46
It is an 8 Channel Isolated 5V 10A Relay Module, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other types of equipment with a large current. Relay output maximum contact is AC250V 10A ..
₹399.01
Ex GST: ₹338.14
8 Channel Bi-Directional Logic Level Converter Module is a Bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices.What really separates this Logic level conv..
₹68.00
Ex GST: ₹57.63
5 Channel Line Tracking Sensor Module (BFD-1000) is a sensor board designed for use with line follower robots. This module has been sufficient to meet the day-to-day task of tracking, but also with the infrared distance sensor and touch detection sensor, the board makes your robot design able to ada..
₹247.00
Ex GST: ₹209.32
The L9110S Dual Channel Motor Driver Module is a compact board that can be used to drive very small robots.This tiny module has two independent L9110S motor driver chips which can each drive up to 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be use..
₹98.00
Ex GST: ₹83.05
The 4 Channel Capacitive Touch Sensor Module uses the touch-sensing IC TTP224 to sense the touch input thus making it easy to add capacitive touch input to your project. The touching detection IC is designed for replacing the traditional direct button key with a diverse pad size. The module has 4 to..
₹119.00
Ex GST: ₹100.85
The TTP226 is a touchpad detector IC which offers 8 touch key. The touching detection IC is designed for replacing the traditional direct button key with a diverse pad size. Capacitive touch allows electronics to sense when your finger is within a few millimeters of a surface to simulate a button “p..
₹129.00
Ex GST: ₹109.32
For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-end input channels or two differential channels. ADC also includes a programmable gai..
₹245.00
Ex GST: ₹207.63
PAM8403 5V Two-Channel Stereo Audio Amplifier Module is based on PAM8403 which is a 3W+3W, class-D audio amplifier. Allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus savi..
₹67.00
Ex GST: ₹56.78
Features:Works in the frequency range of 2.405 to 2.475GHz.This brand has been divided into 142 independent channels, each radio system uses 16 different channels and 160 different types of hopping algorithm.This radio system uses a high gain and high-quality multi-directional antenna, it covers the..
₹3,999.00
Ex GST: ₹3,388.98
FS-I6 SPECIFICATIONS:Channels: 6 ChannelsModel Type: Glider/Heli/AirplaneRF Range: 2.40-2.48GHzBandwidth: 500KHzBand: 142RF Power: Less Than 20dBm2.4ghz System: AFHDS 2A and AFHDSCode Type: GFSKSensitivity: 1024Low Voltage Warning: less than 4.2VDSC Port: PS2;Output:PPMCharger Port: NoANT length: 26..
₹4,898.99
Ex GST: ₹4,151.69
This FS-IA6 6CH AFHDS 2A 2.4G Radio Receiver works great with the FlySky FS-i6 Controller. This compact 6 channel receiver is great for any model using up to 6 channels and reliable, interference-free 2.4GHz AFHDS2A signal operation with a range exceeding 500 meters, it can be considered to be..
₹1,299.00
Ex GST: ₹1,100.85
The Flysky FS-IA6B RF 2.4GHz 6CH PPM output with iBus port receiver works great with the FlySky FS-i6 Controller. This compact 6 channel receiver is great for any model using up to 6 channels and, with a range exceeding 500 meters, it can be considered to be the full range for all but the most deman..
₹1,449.00
Ex GST: ₹1,227.97
Part No:L293DPin No: 16 pinsPackage included:1 x L293D Driver IC..
₹59.00
Ex GST: ₹50.00
CD4440 is a Stereotype audio amplifier IC with an inbuilt dual channel that enables it for stereo and bridge amplification applications. It gives 6W output in dual mode and 19W in bridge mode. This IC has inbuilt over power protection, small residual noise, good ripple rejection and special feature ..
₹59.00
Ex GST: ₹50.00
The MCP3008-I/SL is an 8 channel, 10bit Analogue to Digital (ADC) Converter with SPI interface in 16 pins SOIC package. This ADC combines high performance and low power consumption in a small package by making it as an ideal for embedded control applications. The MCP3008 features successive approxim..
₹199.00
Ex GST: ₹168.64
Showing 1 to 25 of 25 (1 Pages)