Search Criteria
Products meeting the search criteria
The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It co..
₹2,049.00
Ex GST: ₹1,736.44
Compared to other versions of the Arduino using a separate USB-Serial converter chip, the Leonardo innovatively uses a single-chip solution. Only with an Atmega32u4 USB communication and control. The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, el..
₹599.00
Ex GST: ₹507.63
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB ..
₹239.00
Ex GST: ₹202.54
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB ..
₹239.00
Ex GST: ₹202.54
The Arduino Uno R3 with Cable is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.It contains everyt..
₹782.00
Ex GST: ₹662.71
The Arduino Uno R3 Compatible Board is a microcontroller board which is based on the ATmega328. Arduino Uno has 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It has..
₹389.00
Ex GST: ₹329.66
Description:The Arduino Uno is a micro controller board which is based on the ATmega328. Arduino Uno have 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header and a reset button. It ..
₹359.00
Ex GST: ₹304.24
The Arduino Uno R3 Compatible Board is a microcontroller board which is based on the ATmega328. Arduino Uno has 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It has..
₹359.00
Ex GST: ₹304.24
The Arduino Due is an open-source precise microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the newcomer and 1st Arduino board based on a 32-bit ARM core microcontroller. It adds new features and improves all the standard Arduino functionalities. It offers 54 digital input/ou..
₹1,532.01
Ex GST: ₹1,298.31
The Esplora differs from all preceding Arduino boards in that it provides a number of the built-in, ready-to-use set of onboard sensors for interaction. It's designed for people who want to get up and running with Arduino without having to learn about the electronics first. The Arduino Esplora ..
₹1,026.00
Ex GST: ₹869.49
The Arduino Pro Mini is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.The Arduino Pro Mini is intended for semi-permanent install..
₹195.00
Ex GST: ₹165.25
AVR 40 Pin development Board is ideal for learning AVR microcontrollers. This board contains requirements like LEDs, Switches, in-system programming, RS232 communication, etc. All Ports of the controller are accessible through a standard 10 pin FRC connector or simple header pins. Also, a 34*11 gene..
₹709.00
Ex GST: ₹600.85
This is D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266, it is a mini WIFI board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/PWM/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) and a Micro USB connection.The deve..
₹299.00
Ex GST: ₹253.39
The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room.Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart!Simply sew on 4 LEDs and co..
₹199.00
Ex GST: ₹168.64
This is STM32F103C8T6 Development Board STM32 ARM Core Module. This board is a low-cost Minimum System Development Board for ARM Microcontroller STM32F103C8T6.Board is suitable for learners that want to learn the STM32 microcontroller with ARM Cortex-M3 32-bit core.Features :100% Brand new and high-..
₹229.00
Ex GST: ₹194.07
This module is 5V to 3.3V TTL Bi-directional Logic Level Converter Module. 2-channel of high-voltage logic switch low voltage logic into unitary transformation.2 channels of high-voltage logic and low-voltage logic bilateral switching, This Module is compatible with the breadboard, it can..
₹34.00
Ex GST: ₹28.81
Tried connecting a 3.3V device to a 5V system, or the other way around? You should know the challenge it takes. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and..
₹44.00
Ex GST: ₹37.29
This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go.The board itself is tiny, at a..
₹470.01
Ex GST: ₹398.31
SpecificationSupports native Windows Bluetooth stack (Windows XP and Vista)Bluetooth V2.0 Class 1 (class 1 is manufacturer rated)Maximum wireless distance: 100 meters (as per Bluetooth class 1 standard)Plug and playApplicationThis supermini Bluetooth 2.0 adapter dongle is very useful to convert the ..
₹135.00
Ex GST: ₹114.41
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in.Features:compatible with classic or NoIR type raspberry cameraColor: White - BlueLength: 150mm Width: 1..
₹239.00
Ex GST: ₹202.54
Night Vision Infrared LED 3W for Raspberry Pi Camera is the additional focus that can be added to your night vision surveillance camera project using Raspberry Pi. The Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera features the Onboard photoresistor for ambient light detection. Als..
₹194.00
Ex GST: ₹164.41
This Transparent case designed for the Raspberry Pi 2 B and Model B+(B Plus) to give you maximum use of the Raspberry Pi, it provides openings for all the connectors( 3.5mm Audio / Micro USB Power / HDMI Video / Ethernet/ 40 Pin GPIO/ DSI/ USB ports) and comes with four screws that will keep the cas..
₹149.00
Ex GST: ₹126.27
The official red and white enclosure from the Raspberry Pi foundation, specially designed for the Raspberry Pi 3 Model B and Model B+. The versatile design is simple to assemble and allows easy access to all the Raspberry Pi ports and controls without leaving it unprotected.FEATURES :The optional cl..
₹164.00
Ex GST: ₹138.98
After the Success of Pi Zero V1.3, Raspberry Pi has launched a new Upgraded version of Raspberry Pi Zero with inbuilt Wifi and Bluetooth. The most important part about this board is cost-effectiveness. Zero W is the Smallest in the Raspberry pi Family measures only 65mm long by 30mm wide and 5mm dee..
₹1,699.00
Ex GST: ₹1,439.83
A Standard Active Alarm Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switch..
₹59.00
Ex GST: ₹50.00
This is a 2-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller.Features:Trigger mode: High levelThis relay module is 5V active lowStandard in..
₹104.01
Ex GST: ₹88.14
This is a 4-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontrollerSpecifications and Features: Trigger mode: High le..
₹178.00
Ex GST: ₹150.85
Rotary Encoder Rotary Encoder Module is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor/c..
₹89.00
Ex GST: ₹75.42
This is a 5V single Channel Relay Board Module For Arduino PIC AVR DSP ARM. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on can control it. The module is triggered, high trigger current less than 5mA, part of the 51 single-chip IO port output capability is weak, pull ..
₹68.99
Ex GST: ₹58.47
DS18B20 Temperature Sensor Module is a Digital temperature sensor DS18B20 that will tell you temperature with 9 to 12-bit resolution! Uses only 1 wire to the Arduino or other microcontroller for communication. With the One Wire protocol, you can operate a large number of these sensors from one Ardui..
₹129.00
Ex GST: ₹109.32
The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH. If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time th..
₹79.00
Ex GST: ₹66.95
IIC/I2C 1602 Yellow-Green Backlight LCD Display Module For ArduinoParameter:Power supply voltage: +5 vSupport the I2CWith the Blue backlight, and contrast to adjust potentiometerFour line output more simplerPackage included:1 x LCD Display Module with Backlight..
₹230.01
Ex GST: ₹194.92
-250x250.jpg "Laser Transmitter Module For Arduino")
Laser Diode Modules are used in a variety of applications that require small sizes in addition to low power consumption with long operating lifetimes. Laser Diode Module is a breadboard friendly, low cost having a wavelength of 650nm, and operating voltage of 5V. The laser head is composed of ..
₹89.00
Ex GST: ₹75.42
This is an Optical slot speed measuring sensor for Arduino. Widely used in motor speed detection, pulse count, the position limit, etc.The DO output interface can be directly connected to a micro-controller IO port if there is a block detection sensor, such as the speed of the motor encoder can dete..
₹92.00
Ex GST: ₹77.97
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down. The X and Y axes are two 10k potentiometers that control 2D movement by generating anal..
₹89.00
Ex GST: ₹75.42
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.Notice that you do not..
₹89.00
Ex GST: ₹75.42
This air pressure sensor is suitable for biomedical, meteorology, and other fields. The core part is the pressure sensor chip which is made by the MEMS pressure technologySpecifications:Measuring medium: airMeasuring range: 0-40kPaOperating temperature range: -40 ℃ ~ + 125 ℃Storage Temperature: -40 ..
₹499.00
Ex GST: ₹422.88
This is a 10K ohm Negative Temperature Coefficient (NTC) thermistor.NTC Thermistor is one of the most commonly used temperature sensors. In an NTC the resistance value decreases as the temperature increases.NTC 10K can be applied to air conditioner devices,heating devices,clinical thermometer, auto ..
₹13.99
Ex GST: ₹11.86
The Keypad 4x3 features a total of 12 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 7-pin berg connector is provided for interfacing it with your microcontroller circuits. Convenient adhesive backing provides a simple way to mount the keypad in a variety of applica..
₹89.00
Ex GST: ₹75.42
This Matrix Keypad 4 X 4 has 16 buttons, arranged in a telephone-line 3x4 grid with a column of 4 characters (A, B, C, and D). The keys are connected into a matrix, hence only 8 microcontroller pins (4-columns and 4-rows) are required to scan the pad. This 16-button keypad provid..
₹99.00
Ex GST: ₹83.90
A flame detector is a sensor designed to detect and respond to the presence of a flame or fire in a larger area, allowing flame detection. A flame detector can often respond faster and more accurately than a smoke or heat detector due to the mechanisms it uses to detect the flame. Re..
₹359.00
Ex GST: ₹304.24
The 8Bit WS2812 5050 RGB LED Built-in Full-Color Driving Lights Circular Development Board has a round black shape. 8 super bright smart NeoPixels LED arranged in a 28mm outside diameter circular PCB.These ring RGB lamps can be simply connected via the output pin cascade one to the other’s input pin..
₹199.00
Ex GST: ₹168.64
The 9Bit WS2812 5050 RGB LED Built-in Full-Color Driving Lights Circular Development Board has a round black shape. 9 super bright smart NeoPixels LED arranged in a 28mm outside diameter circular PCB.These ring RGB lamps can be simply connected via the output pin cascade one to the other’s input pin..
₹199.00
Ex GST: ₹168.64
49E is a Linear Hall-Effect sensor with a small size and economical price. Hall effect devices are operated by a magnetic field from an electromagnet or a permanent magnet. The user must set souring output voltage by supply voltage. The output voltage varies in proportion to the strength of the magn..
₹28.32
Ex GST: ₹24.00
This is a small buzzer module that operates around the audible 2 kHz frequency range. It is an active buzzer, which means that it produces sound by itself, without needing an external frequency generator. It can easily be used with microcontroller boards, like Arduino, without needing a dedicated PW..
₹57.82
Ex GST: ₹49.00