Search Criteria
Products meeting the search criteria
A Standard Active Alarm Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switch..
₹59.00
Ex GST: ₹50.00
It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product. This is the most complete performance starter kit with all the essential Arduino sensors.FEATURES: For beginners who are interested in Ardu..
₹1,699.00
Ex GST: ₹1,439.83
This is a 2-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller.Features:Trigger mode: High levelThis relay module is 5V active lowStandard in..
₹104.01
Ex GST: ₹88.14
This is a 4-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontrollerSpecifications and Features: Trigger mode: High le..
₹178.00
Ex GST: ₹150.85
Rotary Encoder Rotary Encoder Module is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor/c..
₹89.00
Ex GST: ₹75.42
This is a 5V single Channel Relay Board Module For Arduino PIC AVR DSP ARM. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on can control it. The module is triggered, high trigger current less than 5mA, part of the 51 single-chip IO port output capability is weak, pull ..
₹68.99
Ex GST: ₹58.47
AM2302 Humicap digital temperature and humidity module is a digital output signal containing a calibrated temperature and humidity combined sensor.It uses dedicated digital modules capture technology and the temperature and humidity sensor technology to ensure that products with high reliability and..
₹319.00
Ex GST: ₹270.34
DS18B20 Temperature Sensor Module is a Digital temperature sensor DS18B20 that will tell you temperature with 9 to 12-bit resolution! Uses only 1 wire to the Arduino or other microcontroller for communication. With the One Wire protocol, you can operate a large number of these sensors from one Ardui..
₹129.00
Ex GST: ₹109.32
R307 Fingerprint Module consists of an optical fingerprint sensor, high-speed DSP processor, high-performance fingerprint alignment algorithm, high-capacity FLASH chips, and other hardware and software composition, stable performance, simple structure, with fingerprint entry, image processing, finge..
₹1,149.00
Ex GST: ₹973.73
The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH. If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time th..
₹79.00
Ex GST: ₹66.95
-250x250.jpg "Laser Transmitter Module For Arduino")
Laser Diode Modules are used in a variety of applications that require small sizes in addition to low power consumption with long operating lifetimes. Laser Diode Module is a breadboard friendly, low cost having a wavelength of 650nm, and operating voltage of 5V. The laser head is composed of ..
₹89.00
Ex GST: ₹75.42
The MPU-6050 3-Axis Accelerometer and Gyro Sensor module use MPU-6050 which is a little piece of motion processing tech!!!The MPU6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon together with an onboard Digital Motion Processor (DMP) capable of processing comple..
₹99.00
Ex GST: ₹83.90
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down. The X and Y axes are two 10k potentiometers that control 2D movement by generating anal..
₹89.00
Ex GST: ₹75.42
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.Notice that you do not..
₹89.00
Ex GST: ₹75.42
The Keypad 4x3 features a total of 12 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 7-pin berg connector is provided for interfacing it with your microcontroller circuits. Convenient adhesive backing provides a simple way to mount the keypad in a variety of applica..
₹89.00
Ex GST: ₹75.42
This Matrix Keypad 4 X 4 has 16 buttons, arranged in a telephone-line 3x4 grid with a column of 4 characters (A, B, C, and D). The keys are connected into a matrix, hence only 8 microcontroller pins (4-columns and 4-rows) are required to scan the pad. This 16-button keypad provid..
₹99.00
Ex GST: ₹83.90
The 18650 Battery Shield holds single-cell lithium-Ion 18650 form factor batteries which should have integrated battery protection circuits. The boost circuit maintains the voltage to the Pi at 5.1V for battery voltages of 3.7V to 4.2V. The jumper allows you to disable power to the Pi and Isola..
₹239.00
Ex GST: ₹202.54
A flame detector is a sensor designed to detect and respond to the presence of a flame or fire in a larger area, allowing flame detection. A flame detector can often respond faster and more accurately than a smoke or heat detector due to the mechanisms it uses to detect the flame. Re..
₹359.00
Ex GST: ₹304.24
49E is a Linear Hall-Effect sensor with a small size and economical price. Hall effect devices are operated by a magnetic field from an electromagnet or a permanent magnet. The user must set souring output voltage by supply voltage. The output voltage varies in proportion to the strength of the magn..
₹28.32
Ex GST: ₹24.00
This is a small buzzer module that operates around the audible 2 kHz frequency range. It is an active buzzer, which means that it produces sound by itself, without needing an external frequency generator. It can easily be used with microcontroller boards, like Arduino, without needing a dedicated PW..
₹57.82
Ex GST: ₹49.00
ADXL345 is a Breakout board for the Analog Device's ADXL345 3-axis accelerometer. The module is populated with MOSFET-based Voltage level conversion circuitry to enable you to interface with different types of microcontrollers. Apart from the above all, necessary components like decoupling capacitor..
₹119.99
Ex GST: ₹101.69
APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino.This is the same sensor that the Samsung Galaxy S5 uses and is probably one of the best gesture sensors on the market for the price.This is APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino is a small breakout ..
₹349.00
Ex GST: ₹295.76
Fingerprint scanners are awesome! Why use a key when you have one right at the tip of your finger? Unfortunately, they’re often unreliable or difficult to implement. Well not anymore! This great GT-521F32 fingerprint module from ADH-Tech communicates over TTL Serial so you can easily embed it into y..
₹1,769.00
Ex GST: ₹1,499.15
This data logger shield provides an Arduino Uno, Leonardo, or Mega with the ability to log sensor data to an SD card with the minimum of set-up. The shield includes the very popular DS1307 battery-backed real-time clock (RTC). This RTC will keep an accurate track of the data and time for up to sever..
₹229.00
Ex GST: ₹194.07
The Proto Shield PCB r3 allows you to move your projects from the breadboard to an Arduino-compatible PCB, standing on top of the board. It's a convenient way to make your custom circuit and Arduino MEGA into a single module. The Arduino MEGA Prototyping Shield PCB makes it easy for you to design cu..
₹178.99
Ex GST: ₹151.69
This Sensor Shield expansion board retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology. newly added many kinds of interface, for example, IIC interface, 32 channels servo motor interface, Bluetooth communication module interface, SD Card comm..
₹136.00
Ex GST: ₹115.25
Arduino Uno Protoshield directly fits into an Arduino UNO board and breaks out the I/O pins and makes it an expansion board. It makes it very easy to design any customer circuit. You can directly solder components on the board or connect the circuit using 170 point mini breadboard (included). The bo..
₹135.00
Ex GST: ₹114.41
TCS230 8-pin SOIC surface-mount package, on a single chip,, has 64 photodiodes. These diodes are divided into four types. 16 of the photodiode with a red filter; 16 photodiodes with a green filter; 16 photodiodes with a blue filter; the remaining 16 without any filter, may all the optical informatio..
₹399.01
Ex GST: ₹338.14
GT-511C3 Fingerprint scanner module provides High-speed and Highly accurate Fingerprint Identification using the SmackFinger 3.0 Algorithm. The module is small and easy to mount using two mounting tabs on the side of the sensor. This is the updated version of the GT-511 which has an increased memory..
₹1,899.00
Ex GST: ₹1,609.32
The TCS3200 Color Recognition Sensor Module uses a high-quality light sensor allowing you to sense any color through a combination of Red, Green, and Blue. The module provides all of the pins of the TCS3200 on convenient 0.1″ headers – ideal for use with PCBs, breadboard or stripboard.Four white LED..
₹299.00
Ex GST: ₹253.39
This Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low. Feature and Specification:EYE BLINK indication by LEDInstant output digital signal for directly Connecting to t..
₹399.01
Ex GST: ₹338.14
TSOP1738 is an infrared receiver tuned to receive IR of frequency 38 kHz only. It is perfect for making obstacle sensors and to read signals from most IR remotes. When used as a receiver in distance sensors, it provides better performance as it allows better reception and protection from ambient lig..
₹29.50
Ex GST: ₹25.00
The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert change of conductivity to the corresponding output signal of gas concentrat..
₹140.00
Ex GST: ₹118.64
This is a monochrome LCD module comprised of 84x48 pixels that can be used to display rich graphics and text content. Though it's an industrial module, this LCD display is extremely easy to use. This module is a revision that accepts 3-5v input. So no extra level shifter is needed. To have full cont..
₹229.00
Ex GST: ₹194.07
RC522 - RFID Reader /Writer with Cards Kit includes a 13.56MHz RF reader and writer module that uses an RC522 IC and two S50 RFID cards tag. The MF RC522 is an integrated transmission module for contactless communication at 13.56 MHz. RC522 supports ISO 14443A/MIFARE mode. RC522 - RFID Reader f..
₹149.00
Ex GST: ₹126.27
The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude. The 3 outputs are simultaneous and independ..
₹99.00
Ex GST: ₹83.90
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.Notice that you d..
₹89.00
Ex GST: ₹75.42
SMD RGB LED module consists of a full-color LED made by R, G, B three-pin PWM voltage input can be adjusted. Primary colors strength in order to achieve a full-color mixing effect. Control of the module with the Arduino can be achieved with Cool lighting effects. The RGB Full Color LED SMD Module co..
₹81.42
Ex GST: ₹69.00
The Zumo robot for Arduino is an Arduino-controllable tracked robot platform that is less than 10 cm × 10 cm—small enough to qualify for Mini Sumo. It includes two micro metal gearmotors coupled to a pair of silicone tracks, a stainless steel bulldozer-style blade, an array of six infrared reflectan..
₹11,994.00
Ex GST: ₹10,164.41
This is a basic combo for Arduino and Robotics starter. This set can be used for obstacle sensing cars, Ultrasonic radars, school projects i.e. automatic barrier, automatic light, etc. This combo includes an ultrasonic sensor, motion sensor, IR obstacle sensor, LDR, SG90 Servo motor.HC-SR04-Ultrason..
₹318.00
Ex GST: ₹269.49
Showing 1 to 40 of 40 (1 Pages)