Search Criteria
Products meeting the search criteria
If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, then the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get a 16-Channel 12-Bit PWM/Ser..
₹299.00
Ex GST: ₹253.39
A Standard Active Alarm Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switch..
₹59.00
Ex GST: ₹50.00
This is a 2-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller.Features:Trigger mode: High levelThis relay module is 5V active lowStandard in..
₹104.01
Ex GST: ₹88.14
This is a 4-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontrollerSpecifications and Features: Trigger mode: High le..
₹178.00
Ex GST: ₹150.85
Rotary Encoder Rotary Encoder Module is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor/c..
₹89.00
Ex GST: ₹75.42
This is a 5V single Channel Relay Board Module For Arduino PIC AVR DSP ARM. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on can control it. The module is triggered, high trigger current less than 5mA, part of the 51 single-chip IO port output capability is weak, pull ..
₹68.99
Ex GST: ₹58.47
AM2302 Humicap digital temperature and humidity module is a digital output signal containing a calibrated temperature and humidity combined sensor.It uses dedicated digital modules capture technology and the temperature and humidity sensor technology to ensure that products with high reliability and..
₹319.00
Ex GST: ₹270.34
DS18B20 Temperature Sensor Module is a Digital temperature sensor DS18B20 that will tell you temperature with 9 to 12-bit resolution! Uses only 1 wire to the Arduino or other microcontroller for communication. With the One Wire protocol, you can operate a large number of these sensors from one Ardui..
₹129.00
Ex GST: ₹109.32
R307 Fingerprint Module consists of an optical fingerprint sensor, high-speed DSP processor, high-performance fingerprint alignment algorithm, high-capacity FLASH chips, and other hardware and software composition, stable performance, simple structure, with fingerprint entry, image processing, finge..
₹1,149.00
Ex GST: ₹973.73
The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH. If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time th..
₹79.00
Ex GST: ₹66.95
IIC/I2C 1602 Yellow-Green Backlight LCD Display Module For ArduinoParameter:Power supply voltage: +5 vSupport the I2CWith the Blue backlight, and contrast to adjust potentiometerFour line output more simplerPackage included:1 x LCD Display Module with Backlight..
₹230.01
Ex GST: ₹194.92
-250x250.jpg "Laser Transmitter Module For Arduino")
Laser Diode Modules are used in a variety of applications that require small sizes in addition to low power consumption with long operating lifetimes. Laser Diode Module is a breadboard friendly, low cost having a wavelength of 650nm, and operating voltage of 5V. The laser head is composed of ..
₹89.00
Ex GST: ₹75.42
This is an Optical slot speed measuring sensor for Arduino. Widely used in motor speed detection, pulse count, the position limit, etc.The DO output interface can be directly connected to a micro-controller IO port if there is a block detection sensor, such as the speed of the motor encoder can dete..
₹92.00
Ex GST: ₹77.97
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down. The X and Y axes are two 10k potentiometers that control 2D movement by generating anal..
₹89.00
Ex GST: ₹75.42
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.Notice that you do not..
₹89.00
Ex GST: ₹75.42
RFID Card used for Contactless transmission of data and supplies energy without battery. it works on the frequency of 125khz. Package Content:10 x RFID Card tag..
₹175.01
Ex GST: ₹148.31
This is a 13.56MHz RFID IC Key Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications. Operating on a frequency of 13.56MHz, these tokens are all pre-programmed with unique ID numbers to commu..
₹24.00
Ex GST: ₹20.34
This is a 3W High Power LED Module for Arduino.Specifications:1. Type: LED High Power Board2. Material: PCB3. Mainly Compatible with: Ardunio4. 3W LED High Power Board for Indoor / Outdoor DisplayFeature:Color temperature: Warm White 3000-3200K / white 6000-6500KForward current: 700MALuminous f..
₹139.00
Ex GST: ₹117.80
This 5V 2 Channel SSR – Solid State Relay Module 240V 2A Output. SSR relay which can control up to 2A at 240VAC. This is a 2 Channel SSR relay module which has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).FEATURES:Compact sizeTotally silent operationLed indicat..
₹259.00
Ex GST: ₹219.49
This 5V 4 Channel SSR – Solid State Relay Module 240V 2A Output. SSR relay which can control up to 2A at 240VAC. This is a 4 Channel SSR relay module which has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).FEATURES:Compact sizeTotally silent operationLed indicat..
₹469.00
Ex GST: ₹397.46
This is a small buzzer module that operates around the audible 2 kHz frequency range. It is an active buzzer, which means that it produces sound by itself, without needing an external frequency generator. It can easily be used with microcontroller boards, like Arduino, without needing a dedicated PW..
₹57.82
Ex GST: ₹49.00
ADXL345 is a Breakout board for the Analog Device's ADXL345 3-axis accelerometer. The module is populated with MOSFET-based Voltage level conversion circuitry to enable you to interface with different types of microcontrollers. Apart from the above all, necessary components like decoupling capacitor..
₹119.99
Ex GST: ₹101.69
APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino.This is the same sensor that the Samsung Galaxy S5 uses and is probably one of the best gesture sensors on the market for the price.This is APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino is a small breakout ..
₹349.00
Ex GST: ₹295.76
This data logger shield provides an Arduino Uno, Leonardo, or Mega with the ability to log sensor data to an SD card with the minimum of set-up. The shield includes the very popular DS1307 battery-backed real-time clock (RTC). This RTC will keep an accurate track of the data and time for up to sever..
₹229.00
Ex GST: ₹194.07
In Stock
DS3231 Module is a high precise I2C real-time clock Module. This module made using AT24C32 and DS3231 RTC EEPROM integrated. It also has a built-in comparator which monitors the status of VCC to detect power failures and to automatically switch to the backup power supply. AT24C32 provides ..
₹109.00
Ex GST: ₹92.37
GT-511C3 Fingerprint scanner module provides High-speed and Highly accurate Fingerprint Identification using the SmackFinger 3.0 Algorithm. The module is small and easy to mount using two mounting tabs on the side of the sensor. This is the updated version of the GT-511 which has an increased memory..
₹1,899.00
Ex GST: ₹1,609.32
The TCS3200 Color Recognition Sensor Module uses a high-quality light sensor allowing you to sense any color through a combination of Red, Green, and Blue. The module provides all of the pins of the TCS3200 on convenient 0.1″ headers – ideal for use with PCBs, breadboard or stripboard.Four white LED..
₹299.00
Ex GST: ₹253.39
This hm-10 Bluetooth module with BLE 4.0 support, Internal with logic level conversion circuit. No external 5V level to turn into a 3.3V level Power input with anti-anti-circuit. Avoid accidental power plug reversed. Generally, users are using the HC-05 Bluetooth module but it doesn't support w..
₹329.00
Ex GST: ₹278.81
-250x250.jpg "IRF520 MOSFET Driver Module for Arduino Raspberry pi")
IRF520 MOSFET Driver Module is a breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller.Here is a simple breakout board for the IRF520 Mosfet. Easy hookup to your Arduino or another 3-5v microcontroller. Puls..
₹99.00
Ex GST: ₹83.90
MCP23017 is a high-speed IIC interface. It supports the IIC frequency of 100KHz, 400KHz, and 1.7MHz. The chip has 3 address pins, which can set up to 8 different addresses. So 8 modules can be connected through two IIC buses to achieve up to 128 IO extensions.This module is flexible in configuration..
₹399.01
Ex GST: ₹338.14
The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert change of conductivity to the corresponding output signal of gas concentrat..
₹140.00
Ex GST: ₹118.64
This is a monochrome LCD module comprised of 84x48 pixels that can be used to display rich graphics and text content. Though it's an industrial module, this LCD display is extremely easy to use. This module is a revision that accepts 3-5v input. So no extra level shifter is needed. To have full cont..
₹229.00
Ex GST: ₹194.07
RC522 - RFID Reader /Writer with Cards Kit includes a 13.56MHz RF reader and writer module that uses an RC522 IC and two S50 RFID cards tag. The MF RC522 is an integrated transmission module for contactless communication at 13.56 MHz. RC522 supports ISO 14443A/MIFARE mode. RC522 - RFID Reader f..
₹149.00
Ex GST: ₹126.27
RFID Card used for the Contactless transmission of data and supplies energy without battery. it works on the frequency of 125khz. These tags come with a unique 32-bit ID and are not re-programmable.This is a basic VLF RFID Clamshell Card/Tag used for presence sensing, Access Control, etc. ..
₹27.14
Ex GST: ₹23.00
Voice Recognition Module V3 compatible with Arduino is a compact and easy-control speaking recognition board.Voice (speak) Recognition Module V3 product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. Max 7 voice commands could work at the same time. Any ..
₹2,149.00
Ex GST: ₹1,821.19
The four spindles on the ICSH044A Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module Hall Effect Sensor have a tiny circular magnet in the end; each of these is paired with an SMD hall effect sensor, which is used to measure up, down, left, and right movements of the trackball.An ..
₹589.00
Ex GST: ₹499.15
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors.To simplify use as two bridges each pair of chann..
₹119.00
Ex GST: ₹100.85
Description:L293D Motor Driver Module is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L293 motor driver IC. It can drive 4 DC motors on and off, or drive 2 DC motors with directional and speed control.The driver greatly simplifies and increases th..
₹109.00
Ex GST: ₹92.37
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.Notice that you d..
₹89.00
Ex GST: ₹75.42
SMD RGB LED module consists of a full-color LED made by R, G, B three-pin PWM voltage input can be adjusted. Primary colors strength in order to achieve a full-color mixing effect. Control of the module with the Arduino can be achieved with Cool lighting effects. The RGB Full Color LED SMD Module co..
₹81.42
Ex GST: ₹69.00
Showing 1 to 40 of 40 (1 Pages)