Search Criteria
Products meeting the search criteria
BMP180 Digital Barometric Pressure Sensor Module is used for measuring barometric pressure and altitude. It also has a temperature sensor for temperature compensation of pressure measurements. It uses push sensors for the BMP180. It offers a pressure measuring range of 300 to 1100 hPa with a r..
₹199.00
Ex GST: ₹168.64
PAM8403 is a small digital amplifier chip, high-definition sound quality highlights the advantages of digital chips, the circuit using the most reasonable peripheral configuration, power supply filtering is upgraded to 470uf.Note!!! Please make sure the power supply is not more than 5.5V and pl..
₹95.00
Ex GST: ₹80.51
This is a breakout board/Prototype Board for PCF8591 IC. The PCF8591 is a single-chip, single‑supply low‑power 8‑bit CMOS data acquisition device with four analog inputs, one analog output, and a serial I²C‑bus interface. Three address pins A0, A1, and A2 are used for programming the hardware addres..
₹184.00
Ex GST: ₹155.93
TDA7492P digital amplifier chip, designed to optimize the circuit layout, the sound quality is very good, big power. DIP switches can be adjusted directly after the amp gain more respect and better promote greater damping horn.Package Includes:1 x TDA7492P CSR8635 Bluetooth 4.0 Audio Receiver Digita..
₹979.00
Ex GST: ₹829.66
The TM1638 Button Digital LED Display Module is used in chip TM1638, a collection of these three common MCU peripheral circuit, the biggest feature just takes three microcontroller IO port to drive, do not need to scan display and key scanning microcontroller intervention, only need to read the rele..
₹245.00
Ex GST: ₹207.63
The MAX31865 is an easy-to-use thermistor to digital output converter optimized for platinum resistance temperature detectors (RTD). The external resistor sets the RTD sensitivity, and the high-precision Δ- ΣADC converts the RTD resistor and the reference resistor to digital output. The MAX31865 inp..
₹699.00
Ex GST: ₹592.37
The ADC0808CCN PDIP-28 Analog to Digital Converter-ADC is a µP compatible Analog-to-digital Converter (ADC) with 8-channel multiplexer. The 8-bit A/D converter uses a successive approximation as the conversion technique. The converter features a high impedance chopper stabilized comparator, a 256R v..
₹139.00
Ex GST: ₹117.80
The MAX7219CNG is a compact, serial input/output common-cathode display driver that can interface microprocessors to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit dri..
₹99.00
Ex GST: ₹83.90
Showing 1 to 8 of 8 (1 Pages)