The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontrollers. The single-wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addition to prov..
₹749.01
Ex GST: ₹634.75
28 Pin ZIF Socket is a type of IC socket or electrical connector that requires very little to no force for insertion. This is often used when there is a need to program or test the chip, without damaging the chip. The socket has a lever which when moved up open the clamps for the pins to be inserted..
₹89.00
Ex GST: ₹75.42
40 Pin ZIF Socket is a type of IC socket or electrical connector that requires very little to no force for insertion. This is often used when there is a need to program or test the chip, without damaging the chip. The socket has a lever which when moved up open the clamps for the pins to be inserted..
₹79.00
Ex GST: ₹66.95
This is ATMEGA16 ATmega 32 ISP AVR Minimum Development System Board Module.To get a personal Development Board will help to stimulate your intelligence and inspiration. A bare board may sometimes be more helpful than an assembled one for a learner. Come here and have a look at our AVR Minimum System..
₹300.99
Ex GST: ₹255.08
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling selecte..
₹1,248.99
Ex GST: ₹1,058.47
This is ICSP Programmer Socket – UIC-S. The UIC-S is a socket for UIC00A/B, USB ICSP PIC Programmer. Combine with UIC00A/B, the user will get a standalone USB programmer. The 40-pin ZIF (Zero Insert Force) socket provide an easy to plug and unplug PIC during development (download program).It support..
₹349.00
Ex GST: ₹295.76
The UNC-A (Universal ICSP Adapter) ICSP Universal Socket is a programmer’s output socket adapter. It is compatible with Cytron UIC00 programmer, Microchip PICkit programmer and Microchip In-Circuit Debugger.Each of them has their own standard connection. To ease user, Cytron has created this UIC-A s..
₹366.00
Ex GST: ₹310.17
This is MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino with this module, you will find easy to control any CAN Bus device by SPI interface with your MCU, such as Arduino UNO and Compatible with Arduino based micro-controller projects.Features :Support CAN V2.0B techni..
₹339.00
Ex GST: ₹287.29
The PIC ICD2 PICKit2 PICKIT3 Universal Programming Adapter Programmer Board is designed to work in conjunction with the popular PICkit 2 or PICkit3 programmer.Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28 / 40P (A). This flag line short-circuits cap on the A position..
₹290.00
Ex GST: ₹245.76
The 10.1 inch IPS LCD Touch Screen 1280×800 with Driver Board Kit for Raspberry Pi is an HD IPS digital LCD screen kit with HDMI+VGA+2AV. Do not reverse the positive and negative of the power supply. The back of the drive plate is marked positive and negative (GND). The driver board must be insulate..
₹8,299.00
Ex GST: ₹7,033.05
This TFT display is big (2.8″ diagonal) bright and colorful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display.The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital c..
₹1,169.00
Ex GST: ₹990.68
This Black colored Case for 7-Inch Touch Screen Display is a newly designed case from EasyMech. It is made of 12-pieces of black acrylic that provides adequate protection for your Touch Screen Display and open access to all the pi ports. It is very easy to assemble and de-assemble with all required ..
₹799.00
Ex GST: ₹677.12
This TFT display is big (2.8″ diagonal) bright and colorful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display.As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on ..
₹1,385.00
Ex GST: ₹1,173.73
This is a touch screen driver board that accepts four-wire cables. It’s found in touch-screen displays. The black port of this Driver module will be connected to the display, while the white port will be connected to a Raspberry Pi. We can control the display from the Raspberry Pi. It is a nice cont..
₹399.01
Ex GST: ₹338.14
This is a 15.6 Inch Capacitive Touch Screen LCD from waveshare, with a resolution of 1920×1080, and a capacitive touch panel, which supports Raspberry Pi, Jetson Nano, Windows, Game console and can also be used as a computer monitor. This product supports Windows 10 / 8.1 / 8 / 7, Raspbian / Ubuntu ..
₹17,899.00
Ex GST: ₹15,168.64
This product is a specially designed 2.8-inch CM4 touchscreen expansion board for Raspberry Pi Compute Module 4. CM4-DISP-BASE-2.8A is a baseboard that can be used with Raspberry Pi Compute Module 4, using 5V/ 2.5A USB Type Powered by the C interface, it can be directly connected to the CM4 core boa..
₹6,249.00
Ex GST: ₹5,295.76
A capacitive touch screen is a control display that uses the conductive touch of a human finger or a specialized device for input.Capacitive touch screens detect electrical current so they don’t need to experience the pressure of your finger like resistive screens doFeatures: Designed for Raspb..
₹3,848.99
Ex GST: ₹3,261.86
This is all-new Version V4.0 3.2 Inch TFT LCD Touch Screen for Raspberry Pi display from waveshare is big (3.2″ diagonal) bright and colourful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display.As a bonus, this 3.2 Inch TFT LCD Scree..
₹2,039.00
Ex GST: ₹1,727.97
This is a Waveshare 4-inch Resistive Touch Screen TFT LCD display, with a resolution of 480×320, SPI interface, and a resistive touch panel, which supports any revision of Raspberry Pi (directly pluggable). This LCD can support Raspbian / Ubuntu / Kali. Supports the FBCP software driver as well, all..
₹1,649.00
Ex GST: ₹1,397.46
This is a Waveshare 4-inch Resistive Touch Screen TFT LCD display, with a resolution of 480×320, SPI interface, and a resistive touch panel, which supports any revision of Raspberry Pi (directly pluggable). This LCD can support Raspbian / Ubuntu / Kali. Supports the FBCP software driver as well, all..
₹2,549.00
Ex GST: ₹2,160.17
This small 3.5 inch touch screen Raspberry Pi Display module is designed especially for Raspberry Pi, using the latest Linux Core system. This is ideal for DIY anywhere, anytime and does not require any separate power source or case to hold it. The module sits right on top of Pi and an ideal alterna..
₹1,165.00
Ex GST: ₹987.29
The 5 Inch Touch Screen HDMI Interface TFT LCD Module is a good solution for those who are seeking for a bigger resolution display.This TFT LCD Display for Raspberry Pi has 5″ size which features 800×480 pixel resolution. Getting the Pi onto the display board is easy enough!!! make use of stand-off ..
₹3,128.99
Ex GST: ₹2,651.69
Raspberry Pi CM4 kit with a 5-inch touch screen all-in-one machine. The PoE pin Gigabit Ethernet port supports 4K output, onboard four-way USB2.0, 5-inch touch screen, etc. The all-in-one kit is convenient for users to use.Note:Do not plug and unplug any device except USB and HDMI while the baseboar..
₹7,599.00
Ex GST: ₹6,439.83
The 7 Inch LCD Touch Display With Driver Board Kit For Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems, and embedded projects! We have packed this 7-inch display with Newly Designed Black coloured Stylish Acrylic case from EasyMech..
₹4,748.00
Ex GST: ₹4,023.73
Are you looking 5inch Capacitive Touch Display for Raspberry Pi, DSI Interface, 800×480 so this is for you. Raspberry Pi OS provides touchscreen drivers with support for ten-finger touch and an on-screen keyboard, giving you full functionality without the need to connect a keyboard or mouse. The 800..
₹4,149.00
Ex GST: ₹3,516.10
The 7 Inch LCD Touch Display With Driver Board Kit For Raspberry Pi gives users the ability to create an all-in-one, integrated projects such as tablets, infotainment systems, and embedded projects!The 800×480 physical resolution (resolution range can be adjusted between 640 x 480 to 1600 x 1200) di..
₹4,399.00
Ex GST: ₹3,727.97
This is a Waveshare 7inch 1024×600, Capacitive Touch Display for Raspberry Pi, DSI Interface. Toughened glass capacitive touch panel. It supports Raspberry Pi and can also be used as a computer monitor. This Display is Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, driver free.Hardwa..
₹6,599.00
Ex GST: ₹5,592.37
This is a Waveshare 7inch 800×480 Capacitive Touch Display for Raspberry Pi, DSI Interface. Toughened glass capacitive touch panel. It supports Raspberry Pi and can also be used as a computer monitor. This Display is Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, driver free.Hardware..
₹5,899.00
Ex GST: ₹4,999.15
Waveshare 7inch Capacitive Touch IPS Display for Raspberry Pi, with Protection Case, 1024×600, DSI InterfaceSpecifications and Features:7inch IPS display with capacitive touch panel, hardware resolution is 1024 x 600Capacitive touch, supports up to 5-points touchToughened glass capacitive touch pane..
₹7,749.00
Ex GST: ₹6,566.95
This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory an..
₹590.00
Ex GST: ₹500.00
This lovely little display breakout is the best way to add a small, colourful and bright display to any project.Since the 1.8 Inch TFT LCD Module display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very smal..
₹549.00
Ex GST: ₹465.25
The 10.1 inch IPS LCD Screen 1280×800 with Driver Board Kit for Raspberry Pi is an HD IPS digital LCD screen kit with HDMI+VGA+2AV. Do not reverse the positive and negative of the power supply. The back of the drive plate is marked positive and negative (GND). The driver board must be insulated arou..
₹7,599.00
Ex GST: ₹6,439.83
This lovely little display breakout is the best way to add a small, colorful and bright display to any project.Since the 2.0 Inch SPI TFT LCD Color Screen Module display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. ..
₹675.00
Ex GST: ₹572.03
This TFT display is big (2.8″ diagonal) bright and colorful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display.The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital c..
₹1,169.00
Ex GST: ₹990.68
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supportsLTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption. You can connect this 4G module with a computer to surf the Internet or attach it onto Raspberry Pi to enable functions l..
₹6,484.01
Ex GST: ₹5,494.92
This is a 4G/3G/2G Raspberry Pi communication HAT with GNSS positioning and high-speed LTE CAT4 global band connection. By connecting it to a PC, Raspberry Pi, or Jetson Nano host board, it is easy to enable 4G high-speed networking, cloud platform comunication, phone call/SMS, and global GNSS posit..
₹7,789.00
Ex GST: ₹6,600.85
This is a Raspberry Pi LoRa HAT based on SX1262, which covers the 868MHz frequency band. It allows data transmission up to 5km through the serial port.By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports..
₹2,399.00
Ex GST: ₹2,033.05
This is a Raspberry Pi LoRa HAT based on SX1262, which covers the 915MHz frequency band. It allows data transmission up to 5km through the serial port.By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports..
₹2,699.00
Ex GST: ₹2,287.29
This is a Raspberry Pi LoRa HAT based on SX1268, which covers the 433MHz frequency band. It allows data transmission up to 5km through the serial port.By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports..
₹1,749.00
Ex GST: ₹1,482.20
This is a driver-free 3 ports USB 3.2 Gen1 Hub HAT for Raspberry Pi, also with a Gigabit Ethernet port, provides more USB/network capability to your Pi, making it easy to connect more USB devices and network devices. The HAT features a standard Raspberry Pi 40PIN GPIO extension header, when working ..
₹2,199.00
Ex GST: ₹1,863.56
This is a Waveshare USB HUB HAT (B) for Raspberry Pi Series with 4x USB 2.0 Ports. It is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, what’s more, it features a USB to UART converter for easy serial communication. The Module can work with various versions of the Pi, an..
₹599.00
Ex GST: ₹507.63
ZYMKEY4i is the fourth generation of the Zymbit security module designed to work with single-board computers like the Jetson Nano. It connects to the GPIO header of the Jetson and uses the I2C bus and GPIO-4 to communicate with the Jetson CPU via an encrypted channel.ZYMKEY 4i can also be used with ..
₹4,198.99
Ex GST: ₹3,558.47
The Proto Screw Shield is the ultimate breakout board for a Raspberry Pi. It combines a prototyping shield with a full set of 3.5 mm screw terminal blocks. The proto shield part lets you build custom circuitry and then you can easily & securely connect wires and sensors to the terminal blocks. G..
₹776.00
Ex GST: ₹657.63
Raspberry Pi is not only a powerful Single Board Computer, but it also comes with plenty of GPIO that you can interface with other electronic sensors, actuators. With this low-cost Proto HAT, you will have a solid PCB to insert and mount other electronic components. Compatible with Raspberry Pi A+/ ..
₹299.00
Ex GST: ₹253.39
This is a handy, low power Raspberry Pi HAT that features multi communication functionalities: GSM, GPRS, GNSS, and Bluetooth. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.Note: Raspberry Pi Sh..
₹3,199.00
Ex GST: ₹2,711.02