UDOO NEO BASIC is the perfect solution for low power consumption embedded systems.You can use it as a Headless Device, exploiting USB and Ethernet ports. The board is compatible with most Arduino shields, sensors and actuators. UDOO NEO BASIC is also compatible with UDOO Bricks: programmable modules..
₹4,799.00
Ex GST: ₹4,066.95
UDOO X86 is the New PC, the most powerful x86 maker board ever and an Arduino 101-compatible platform, all embedded on the same board.On UDOO X86 you can run all the software available for the PC world, from gaming to video streaming, from graphical editors to professional development platforms, plu..
₹19,511.01
Ex GST: ₹16,534.75
The SparkFun MicroMod Teensy Processor leverages the awesome computing power of the NXP i.MXRT1062 chip. And With the M.2 MicroMod connector, connecting with the Teensy Processor makes it a breeze. The Teensy Processor Board Consists an impressive computing power with an ARM Cortex-M7 processor oper..
₹2,559.00
Ex GST: ₹2,168.64
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. This shield features 10DoF (Degrees of Freedom) motion sensors, a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. This little board is ..
₹1,539.00
Ex GST: ₹1,304.24
PT8211 is a dual channel, 16 bit Digital-to-Analog Converter IC utilizing CMOS technology specially designed for the digital audio applications. The internal conversion architecture is based on an R-2R resister ladder network, an internal circuit is well matched and a 16 bit dynamic range is achieve..
₹249.00
Ex GST: ₹211.02
Teensy 3.2 Development Board is a direct, 100% compatible replacement for Teensy 3.1. It is fully compatible with all shields and add-on boards made for Teensy 3.1 The main change is an improved 3.3V regulator, to allow Teensy to directly power ESP8266 Wifi, WIZ820io (W5200) Ethernet, and other powe..
₹1,899.00
Ex GST: ₹1,609.32
The Teensy USB Development Board is a complete USB-based microcontroller development system. Version 3.5 features a 32 bit 120 MHz ARM Cortex-M4 processor with floating point unit. All digital pins are 5 volts tolerant. All Teensy boards are shipped assembled and fully tested.The Teensy is a breadbo..
₹3,199.00
Ex GST: ₹2,711.02
The Teensy is a breadboard-friendly development board with loads of features in a teensy package. Each Teensy 3.6 comes pre-flashed with a bootloader so you can program it using the onboard USB connection, so no need of an external programmer. You can program for the Teensy in your favorite program ..
₹2,899.00
Ex GST: ₹2,456.78
The Teensy 4.0 features an ARM Cortex-M7 processor at 600 MHz, with an NXP iMXRT1062 chip, the fastest microcontroller available today – ten times faster than the Teensy 3.2! The NXP iMXRT1062 is a ‘cross-over’ processor, which has the functionality of a microcontroller, at the speeds of a microcomp..
₹2,849.00
Ex GST: ₹2,414.41
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with an NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same size an..
₹3,249.00
Ex GST: ₹2,753.39
The Teensy LC USB Micro-controller Development Board is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy LC (Low Cost) is a 32 -bit microcontroller board that provides you with an uncomplicated option for getting started with the Teensy line of pr..
₹1,399.00
Ex GST: ₹1,185.59
The PIC-IoT WG Development Board combines a powerful PIC24FJ128GA705 MCU, an ATECC608A Crypto Authentication secure element IC and the fully-certified ATWINC1510 Wi-Fi® network controller – which provides the most simple and effective way to connect your embedded application to the Google Cloud IoT ..
₹5,269.00
Ex GST: ₹4,465.25
This is 16-bit or 32-bit PIC Start-Up Kit – SK1632. The SK1632, a start-up kit for 16-bit or 32-bit, 28-pin PIC Microcontroller. With the powerful processing power provided by 16-bit (PIC24) and dsPIC (with DSP engine), there are many possible advance application can be developed. Additional, this ..
₹628.00
Ex GST: ₹532.20
This is 18 Pins PIC Start-up Kit – SK18B. The SK18B is another version of SK18A. It is designed to offer an easy to start the board for PIC MCU user. However, all interface and program should be developed by the user.This board comes with the basic element for the user to begin project development. ..
₹619.00
Ex GST: ₹524.58
This is 28 Pins PIC Start-up Kit – SK28A. The SK28A is new starter kit designed for 28-pin PIC which supports all 8-bit, 5V operated, 28-pin PDIP PIC. This board comes with the basic element for the user to begin project development.Features :Industrial grade PCB.Every board is being tested before i..
₹724.00
Ex GST: ₹613.56
This is 40 Pins dsPIC Start-Up Kit – SKDS40A. The SKds40A is designed to support Microchip 40-pin dsPIC MCU. It supports dsPIC30F3011, 4011, 3014, 4013.This starter kit comes with the basic components for the dsPIC to execute the program. It is ready to be plug and use.This package comes with ..
₹1,144.00
Ex GST: ₹969.49
This is 40 pins PIC Start-Up Kit Combo 1 – SK40C PIC16F877A (SK40C1). The 40-pin PIC Start-Up Kit Combo 1 is the combination of SK40C and a PIC16F877A.SK40C (new version of SK40B) is a 40pin PIC microcontroller starter kit designed to offer an easy-to-start solution for PIC microcontroller user. Thi..
₹1,248.99
Ex GST: ₹1,058.47
This is 40 pins PIC Start-Up Kit Combo 2 SK40C + PIC18F4550 (SK40C2). The SK40C (new version of SK40B) is a 40pin PIC microcontroller starter kit designed to offer an easy-to-start solution for PIC microcontroller user. This board comes with the basic element for the user to begin project developme..
₹1,459.00
Ex GST: ₹1,236.44
Great news for PIC microcontroller lover. CIKU is for you.Named after a type of tropical fruit, sweet and brown in color. Normally known as “sapodilla“, they call it “CIKU” in Malaysia.CIKU is PIC18F4550 based Arduino form factor starter kit for the hobbyist, student, developer or any maker th..
₹1,248.99
Ex GST: ₹1,058.47
This is Cytron 40 pins PIC Start-Up Kit SK40C. The SK40C (new version of SK40B) is a 40pin PIC microcontroller starter kit designed to offer an easy-to-start solution for PIC microcontroller user. This board comes with the basic element for the user to begin project development. It offers plug and u..
₹829.00
Ex GST: ₹702.54
The Olimex Duinomite-mini Pic32MX795 Pic 32Bit is a Maximite Compatible Basic computer, originally designed by Geoff Graham, with additional features. DuinoMite allows you to program in BASIC language and have VGA and Keyboard interface, so you can develop and write your code in Basic without the ne..
₹2,913.00
Ex GST: ₹2,468.64
This is Olimex PIC32-PINGUINO-MICRO ARDUINO like PIC32MX440F256H USB OTG. The PIC32-PINGUINO-MICRO development board enables code development of applications running on the PIC32MX220F032D microcontroller, manufactured by Microchip technology.The Olimex PIC32-Pinguino-Micro is a PIC32 development bo..
₹1,889.99
Ex GST: ₹1,601.69
This is Olimex PIC32-PINGUINO-OTG ARDUINO like PIC32MX440F256H USB-OTG an ARDUINO-like board with PIC32MX440F256H with USB-OTG.WARNING!!!Do not use the “programmer-to-go” button when there is no image on the OLIMEX PIC-KIT3 or MICROCHIP PIC-KIT3 because that might put your microcontroller in an irre..
₹3,139.00
Ex GST: ₹2,660.17
The Air602 WiFi Development Board is based on the Air602 Wi-Fi module and an integrated USB interface and Antenna. If you plug this board into your computer, it will be recognized as a Ports (COM & LPT), so that you can code it with Serial port tool. This module support IEEE802.11b/g/n and AT co..
₹420.00
Ex GST: ₹355.93
The APEX 3inch drone frames have a designated size class, based upon the longest distance from motor to motor measured in millimeters, typically taken by measuring diagonally across the frame. A-frame measuring less than 150mm motor-to-motor is categorized as a micro. A-frame larger than 150mm motor..
₹1,679.00
Ex GST: ₹1,422.88
A fully-featured development board for the Raspberry Pi with various sensors and communication protocols such as a 3D Gyroscope, Accelerometer, and 8 Microphone Array, Zigbee, Z-Wave, and more!MATRIX Creator is a fully-featured development board, including sensors, wireless communications, and an FP..
₹9,549.00
Ex GST: ₹8,092.37
A voice and audio focused development board with an 8 microphone array that enables you to create your own audio driven applications or use voice assistants such as Amazon Alexa, Google Assistant, PocketSphinx, etc.MATRIX Voice is a development board for building sound driven behaviors and interface..
₹6,499.99
Ex GST: ₹5,508.47
Microsoft’s Azure Sphere MT3620 Starter Kit supports rapid prototyping of highly secure, end-to-end IoT implementations using Microsoft’s Azure Sphere. The small form-factor carrier board includes a production-ready MT3620 Sphere module with Wi-Fi connectivity, along with multiple expansion interfac..
₹8,499.00
Ex GST: ₹7,202.54
The NANO32 ESP32 IoT Development Board is the product by the designers of Arduino Nano and Espresso Lite (Thailand-based Gravitech and MakerAsia respectively) is the first third-party development board that provides another alternative to the eager-beavers community of geeks, makers, hackers and dev..
₹2,913.00
Ex GST: ₹2,468.64
The Particle Argon is an IoT development board that allows you to connect your mesh network to Wi-Fi. With the Nordic nRF52840 SoC and an ESP32 you have all the power of an ARM Cortex M4 with OpenThread mesh networking, Wi-Fi (b/g/n), NFC, plenty of GPIOs, LiPo charging and more. The board is design..
₹3,799.00
Ex GST: ₹3,219.49
Introducing WiPy 2.0. The tiny MicroPython enabled Wifi & Bluetooth IoT development platform. With a 1KM WiFi range, state of the art Espressif ESP32 chipset and dual processor, the WiPy is all about taking the Internet of Things to the next level. Create and connect your things everywhere.Pycom..
₹1,699.00
Ex GST: ₹1,439.83
Well, you can find hundreds of WiFi shields, modules for Arduino out there. However, most of them are either unstable, either oversized or expensive. When the Arduino and wifi chips are integrated on one development board, it is another story. Today, the protagonist of our story is Wio Lite W600 – S..
₹1,099.00
Ex GST: ₹931.36
Sipeed MAix: AI at the edgeAI is pervasive today, from consumer to enterprise applications. With the explosive growth of connected devices, combined with a demand for privacy/confidentiality, low latency and bandwidth constraints, AI models trained in the cloud increasingly need to be run at the edg..
₹1,987.00
Ex GST: ₹1,683.90
Sipeed MAix: AI at the edgeAI is pervasive today, from consumer to enterprise applications. With the explosive growth of connected devices, combined with a demand for privacy/confidentiality, low latency, and bandwidth constraints, AI models trained in the cloud increasingly need to be run at the ed..
₹846.00
Ex GST: ₹716.95
The Apex DC is a variation on the typical ‘dead cat’ frame which we have modified to keep the front and rear motors aligned, allowing us to maintain the much loved compressed-x geometry in the motor layout.This ensures the frame remains balanced and flight characteristics are not compromised, unlike..
₹3,079.00
Ex GST: ₹2,609.32
Based on MAIX Module, the Maixduino is a RISC-V 64 development board for AI + IoT applications. Different with other Sipeed MAIX dev. boards, Maixduino was designed in an Arduino Uno form factor, with the ESP32 module on board together with the MAIX AI module.Sipeed Maixduino for RISC-V AI + IoTAppl..
₹2,625.00
Ex GST: ₹2,224.58
If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be ex..
₹11,169.00
Ex GST: ₹9,465.25
Based on MAIX Module, the Maixduino is a RISC-V 64 development board for AI + IoT applications. Different from other Sipeed MAIX dev. boards, Maixduino was designed in an Arduino Uno form factor, with the ESP32 module on board together with the MAIX AI module and ZV-T01-GA4.4 camera module.Applicati..
₹4,149.00
Ex GST: ₹3,516.10
The Assassin 5 inch 222mm Drone Racing frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weig..
₹3,159.00
Ex GST: ₹2,677.12
Sipeed TANG PriMER FPGA Dev. Board features Anlogic EG4S20 FPGA unrelated to Amlogic which runs a RISC-V softcore, and all is packaged in a small form factor.Sipeed TANG PriMER FPGA Dev. BoardApplication scenario:High-speed communication interface interconnectionLearning, debugging, rese..
₹2,349.00
Ex GST: ₹1,990.68
The Mark4 5Inch 225mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.Carbon fiber is mostly an accepted material for frame designing because of its high stiffnes..
₹2,030.00
Ex GST: ₹1,720.34
The Mark3 145mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quad-copters. It is known for its toughness and durability.Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight..
₹2,249.00
Ex GST: ₹1,905.93
Ai Thinker ESP32-C3-01M WiFi Module from ESP32-C3-01M series modules. The chip ESP32-C3-01M is equipped with a 32-bit RISC-V single-core processor with a working frequency of up to 160 MHz. It supports secondary development without the use of other microcontrollers or processors. It is a highly inte..
₹239.00
Ex GST: ₹202.54
The core of this module is the ESP32 chip, which is scalable and adaptive. Two CPU cores can be individually controlled. The clock frequency is adjustable from 80 MHz to 240 MHz and supports RTOS.It is a general-purpose Wi-Fi+BT+BLE MCU module.ESP-WROOM-32s The module integrates traditional Bl..
₹799.00
Ex GST: ₹677.12
If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be ex..
₹10,855.00
Ex GST: ₹9,199.15