The Raspberry Pi TV HAT allows you to receive digital terrestrial TV broadcast systems which include DVB-T and DVB-T2 on a Raspberry Pi.With the board, you can receive and view TV on a Raspberry Pi or create a TV server that allows you to stream received TV over a network to other devices. The TV HA..
₹2,299.01
Ex GST: ₹1,948.31
Yes, it is finally here. Raspberry Pi Zero (Without wifi version) is available on robu.in. This is a super cheap single board computer. You get a working computer, it is cheaper than any Arduino controller board. Though is not a working computer yet, at least you have the motherboard ???? Alth..
₹999.00
Ex GST: ₹846.61
The Raspberry Pi Zero W is new and improved with a whopping upgrade! Can you guess what it is? (Hint: W). No, it’s not just a letter, it’s WiFi!That’s right, one of our favorite type of upgrades has reached the Raspberry Pi Zero board. Built-in WiFi is made possible with the BCM43143 WiFi chip addit..
₹1,299.00
Ex GST: ₹1,100.85
The Brand New Raspberry Pi Zero Wireless WH (with Pre-Soldered Header) has landed at ModMyPi! The Raspberry Pi Zero is an ultra-low-cost and ultra-small variant of the original Raspberry Pi. It’s tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, protot..
₹1,479.00
Ex GST: ₹1,253.39
This is the latest version of Raspberry Pi Zero V1.1 W (Wireless), if you are looking for Raspberry Pi Zero, get it here.Yes, it is finally here. Raspberry Pi Zero W (Wireless) is available on robu.in. This is a super cheap single board computer. You get a working computer, it is cheaper than any Ar..
₹1,598.99
Ex GST: ₹1,355.08
Control your Raspberry Pi 3, 2, A+, B+, or Zero with a flick of the wrist! The Pimoroni Skywriter HAT senses the position of your fingers in the air above.Using Pimoroni’s Python API you can read off the positional data (x, y, z) and common gestures like flick left, tap, and double tap.Because the s..
₹4,098.00
Ex GST: ₹3,472.88
Maker Pi Pico Base incorporates the most wanted Reset button for your Rasberry Pi Pico and gives you access to all GPIO pins on two 20 ways pin-headers, with clear labels. Each GPIO is coupled with an LED indicator for convenient code testing and troubleshooting. The bottom layer of this board even ..
₹881.00
Ex GST: ₹746.61
Cytron’s Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you can build your new robot friend while simultaneously trying out the new RP2040 chip!T..
₹999.00
Ex GST: ₹846.61
M5 Stack STAMP-PICO Mate features an ultra-compact design with two low-power Xtensa 32-bit LX6 microprocessors at 240MHz on a PCB as tiny and delicate as a postage stamp. low power consumption. It is ideal for any space-constrained or battery-powered devices such as wearables, medical devices, senso..
₹639.01
Ex GST: ₹541.53
This is a 2-DOF pan-tilt hat based on Raspberry Pi 40PIN GPIO. It can directly be used once plugged into the Pi board’s GPIO. Meanwhile, the board makes the Raspberry Pi GPIO pins led out for your convenient use. With the I2C interface adopted, the module allows your Pi to control the camera mo..
₹1,948.99
Ex GST: ₹1,651.69
The PiKVM v3 allows for a remote connection via your Raspberry Pi even if the target machine isn’t booted! This feature-rich HAT brings powerful tools to your fingertips.PiKVM allows you to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-..
₹21,999.00
Ex GST: ₹18,643.22
Make some noise with this high quality stereo I2S audio add-on board for your Raspberry Pi Pico, with amplified headphones AND unamplified line-level outputs!Pico Audio Pack uses its PCM5100A DAC to output up to 32-bit, 384KHz stereo audio along its 3.5mm line out connector, ready for plugging in to..
₹1,449.00
Ex GST: ₹1,227.97
The Raspberry Pi X820 V3.0 Expansion Board is the updated version of the X820 V1.3 board, and this expansion board provides a complete storage solution for raspberry pi.It seamlessly connects any 2.5″ external SATA HDD/SSD drive with a Raspberry Pi Compute Module. With the Rasberry Pi X820 Board, yo..
₹3,699.01
Ex GST: ₹3,134.75
This is a high-quality universal GPIO extension board compatible with Raspberry Pi 2/ 3 Model B making working easier because of its multi-functional module. You can simply click on them to insert a wire into them, it includes all the mounting hardware required to fix the board to your Raspberry Pi...
₹320.00
Ex GST: ₹271.19
GrovePi+ is an add-on board with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with Raspberry Pi model B/B+/A+/2/3/4 perfectly.GrovePi+ is an easy-to-use and modular system for hardware hacking with the Raspberry Pi, no need for solderin..
₹3,999.00
Ex GST: ₹3,388.98
1.3inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×240, SPI is the newly launch 1.3 inches high-Quality LCD display from waveshare. The module comes with an Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico 1x Joystick And 4x User Buttons For Easy Interacting.Feature..
₹699.00
Ex GST: ₹592.37
2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi, MCP2515 + SN65HVD230 Dual Chips Solution, Multi Onboard Protection Circuits. Enable Isolated And Stable CAN Bus Capability For Your Raspberry Pi .Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards .MCP2515 CAN..
₹2,188.99
Ex GST: ₹1,855.08
This is a dual-channel isolated RS485 extension board specially designed for raspberry PI, which adopts SC16IS752+SP3485 solution embeds with protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.This product adopts SC16IS752 as a controller. SC16IS752 is a..
₹1,569.00
Ex GST: ₹1,329.66
Create your DIY 3 channel remote control to ON-OFF three electrical devices from your Mobile application The Waveshare 3 Channel Relay HAT Smart Home for Raspberry Pi 3 gives your Pi the ability to control high voltage/high current devices, which can be operated up to 230V AC 5A current easily makes..
₹1,849.00
Ex GST: ₹1,566.95
This is a 4-ch current and power monitor HAT designed for Raspberry Pi. Via the I2C or SM Bus interface, it is easy to monitor each channel’s current, voltage, and power consumption, as well as the voltage between both sides of the sampling resistor. This is a 4-ch current and power monitor HAT desi..
₹3,079.00
Ex GST: ₹2,609.32
ARPI600 is a Raspberry Pi Expansion Board, it simply adapts the Raspberry Pi GPIO interface to Arduino pinouts making it possible to use your Raspberry Pi with a precious number of Arduino shields and hardware/software resources. The ARPI600 also supports XBee modules, adds up wireless features with..
₹1,651.00
Ex GST: ₹1,399.15
The Waveshare’s Arduino Compatible Base Board For Raspberry Pi Compute Module 4 is a basic expansion board compatible with Arduino, an expansion board that can be used with Raspberry Pi Compute Module 4, and supports a 5V DC power supply with a Type-C interface. The board is populated with an HDMI i..
₹2,349.00
Ex GST: ₹1,990.68
This DC motor driver has been designed specifically for the Raspberry Pi Pico and can PWM control up to 4 DC motors at a constant current of 1.2A (3.2A peak).Power input between 6-12V can be applied, which conveniently powers the Raspberry Pi Pico thanks to the onboard 5V regulator. An on/off switch..
₹1,649.00
Ex GST: ₹1,397.46
My name is CM4-ETH-RS485-BASE-B, which is an expansion board that can be used with Raspberry Pi Compute Module 4, and supports 7-36V DC power supply and 5V DC DC power supply of Typc-C interface. Onboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interface..
₹4,898.99
Ex GST: ₹4,151.69
Waveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
CM4-ETH-RS485-BASE-B, which is an expansion board that can be used with Raspberry Pi Compute Module 4, and supports 7-36V DC power supply and 5V DC DC power supply of Typc-C interface. Onboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interfaces and two U..
₹9,449.00
Ex GST: ₹8,007.63
Hot
Picking the right flight controller that suits your needs is always a daunting task… Don’t worry we Robu.in is here to assist you to get a quality product. Buy this Pixhawk 2.4.8 32 Bit PX4 Autopilot flight controller for your drone application. what are you have to do is just check it’s a specifica..
₹3,189.00
Ex GST: ₹2,702.54
This is a breakout cable for the Naze32 flight controller. The NAZE32 Receiver connecting cable specially designed for open-source flight controllers such as Naze32 to connect with a radio receiver, sturdy and durable.Package Includes:1 x Naze 32 6DOF receiver cable..
₹119.00
Ex GST: ₹100.85
This is an NX4 EVO Flight Controller. This Flight Controller Four-level flight modes are Beginner, Practice, Intermediate, Experts. This Flight Controller Supports a single aileron, dual ailerons, triangles, and V-tail. The input Voltage of This Flight Controller is about 5-6 volts and This Controll..
₹1,900.00
Ex GST: ₹1,610.17
This buzzer is used with Pixhawk and PX4 autopilot to annunciate status tones. The buzzer includes a two-position DF14 connector on one side that plugs directly into the Pixhawk or PX4 FMU board. The Passive buzzer has a JST-SH connector on one side that plugs directly into the Pixhawk. Once connect..
₹129.00
Ex GST: ₹109.32
This Pixhawk flight controller from RadioLink has optimized the PCB layout and the barometer height hold, providing more stable flight performance even at high speed. It integrated the newest 32-bit chip technology and high-end sensors, this is absolutely one of the best flight controllers for quadc..
₹19,499.00
Ex GST: ₹16,524.58
This is a Radiolink Mini Pix Flight Controller. This Flight controller has PIXHAWK Vibration Damping by this it can reduce the Motor vibration. Also, it has two telemetry Stream by which it can Transmit both Data and images. Image Transmission Depends upon the rated voltage of image Transmission. Th..
₹11,699.00
Ex GST: ₹9,914.41
You will get an STM32F405 FC (better than F411), onboard 4-level battery life indicator, 4GB Blackbox SD card slot for your flight logs, 4 groups of LED strip pads, complete with a DJI plug for your digital quad, and built-in Bluetooth for wireless configuration on the SpeedyBee app. Don’t forg..
₹7,749.00
Ex GST: ₹6,566.95
Built with a better Bluetooth/WiFi 2-in-1 chip for 33% faster wireless data transfer. Update FC firmware with your smartphone in just 1 minute! Connect this FC via Bluetooth and fully configure any setting forget flight/Emuflight/INAV as you want.Features:Flash your firmware 33% faster wirelessly + ..
₹13,499.00
Ex GST: ₹11,439.83
The world’s first FC board is compatible with the Silverware firmware. This is the most simple and affordable method to try whoop FPV racing hobby. Supports level mode and acro mode. Also, it has the ability to change settings for custom builds or to adapt to personal preferences by stick gestures. ..
₹879.01
Ex GST: ₹744.92
These Anti-Vibration fixed Screws are the pack of 4 screws that can be used to absorb and reduce vibrating shock from the quadcopter frame to the flight controller board, to protect it from damage as well as it provides tight-fitting on the frame. As high-frequency vibrations transmitted to th..
₹119.00
Ex GST: ₹100.85
AeroFC is the Latest Launch Triple Redundant Autopilot flight controller, which is based on an STM 32 microcontroller clocked at 216MHz. The IMU’s supports Dual redundant power inputs accelerometer, gyroscope, and magnetometer.The onboard STM 32 is isolated and dampened while reducing the interferen..
₹21,906.00
Ex GST: ₹18,564.41
If you are wandering to make your First DIY Drone. Then This Anti-vibration shock absorber is needed for you. The absorber is used to protect your flight controller from vibration while driving.This is a universal Glass Fiber Flight Controller Anti-Vibration Set Shock Absorber APM/KK/MWC/Pixhaw..
₹199.00
Ex GST: ₹168.64
Are you want to be an Electronic Geek in the future and want to build your own drone then this Flight controller is best for you. The flight controller uses the data gathered by the sensors to calculate the desired speed for each of the four motors. The flight controller sends this desired speed to ..
₹6,649.01
Ex GST: ₹5,634.75
This 6 in 1 CC3D Receiver Cable Suitable for MINI CC3D, standard CC3D, CC3D EVO. 1 x 6 in 1 CC3D Cable Set. Color Function JST-SH Pin Servo connector plug. Yellow PWM signal 3 or PWM outputCable color denotations:Black Ground 1 1.Red Power to RC RX-(VCC Unregulated) 4.8V-15V 2 1.White PWM signal 1 o..
₹139.00
Ex GST: ₹117.80
Flight Control Flip32 CC3D Shock Absorber Flight Control Damping Plate Shock Absorber FPV Aerial Essential for Mini QAV250/H250 QuadcopterIt absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. The flush flat-bottom mounting allows bolt or tape style attachme..
₹199.00
Ex GST: ₹168.64
Damping Plate Shock Absorber for CC3D Flip32 Naze32 Mini APM Flight controller is a small but very essential component in building the quadcopter or any RC drone using flight Controller to protect them from vibration while flying as well as with landings.It absorbs vibration, the center supported pl..
₹199.00
Ex GST: ₹168.64
DF13 4 Pin Flight Controller communication cable uses the Hirose DF13 series connector. It is 20 cm long and it is designed to be used on the APM and PX4 board series. It is typically used between the PixHawk and the GPS receiver module.These cables have a good temperature resistive silicon fle..
₹49.01
Ex GST: ₹41.53
DF13 5 Pin Flight Controller communication cable uses the Hirose DF13 series connector. It is 20 cm long and it is designed to be used on the APM and PX4 board series. It is typically used between the PixHawk and the GPS receiver module.These cables have a good temperature resistive silicon fl..
₹79.00
Ex GST: ₹66.95
DF13 6 Pin Flight Controller communication cable uses the Hirose DF13 series connector. It is 20 cm long and it is designed to be used on the APM and PX4 board series. It is typically used between the PixHawk and the GPS receiver module.These cables have a good temperature resistive silicon fl..
₹89.00
Ex GST: ₹75.42
The new 4in 1 EMAX Magnum Mini stack features F4 flight controller board OSD, MPU6000 gyro, connected via fast SPI. This 4in1 ESC has BLHELI_32 supporting 35A current rating. That huge Amp rate means you can use this mini-stack for 5″ quads! This stack supports from 3S up to today’s modern 6S b..
₹7,799.00
Ex GST: ₹6,609.32