This product is suitable for the pulley wheel of 2cm width this is a high-quality grip belt that can usually be used in the Robotics project. Package Content:1 x Track belt of 2cm x 65cm length..
₹187.62
Ex GST: ₹159.00
Track Belt 4 cm Width x 100 cm Length is a loop of flexible material, which can be used either as a conveyor belt or a mechanism to move your robot. Belt are looped over pulleys, these pulleys have a groove running all through so that the belts fit perfectly inside.You can join two belts to in..
₹249.00
Ex GST: ₹211.02
This Transparent Robot Smart Car Chassis comes with a quality product. The kit is easy to assemble/disassemble.Feature:Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.This car is the tachometer encoder.With a 4 AA battery box (batteries not included).It can be used for ..
₹369.00
Ex GST: ₹312.71
Worm gears are used when large gear reductions are needed. It is common for worm gears to have reductions of 20:1, and even up to 300:1 or greater.Features:Pitch Diameter=40 mm.Length=32mm.Center Shaft Diameter=6 mm.Applications:Gate control mechanisms.Hoisting machines.Automobile steering mechanism..
₹29.00
Ex GST: ₹24.58
Plastic Tire Wheel With DC 3-6v Gear Motor For Arduino Smart CarSpecifications:Motor:Voltage: DC 3V-6VCurrent: 100 MA-120MAReduction rate: 48: 1RPM (With tire): 100-240Tire Diameter: 65mmCar Speed(M/minute): 20-48Motor Weight (g): 29/eachMotor Size: 70mm X 22mm X 18mmNoise: <65dBTire Parame..
₹115.00
Ex GST: ₹97.46
Specification:Weight: 125 gm(Approx.)RPM: 1000Operating Voltage: 12V DCGearbox: Attached Metal GearboxShaft diameter: 6mmShaft Length: 21 mmTorque: As per RPMNo-load current = 60 mA(Max)Load current = 300 mA(Max).Dimensions: Body Diameter: 38mm; Motor Length with shaft: 77 mm;Same size motor availab..
₹149.00
Ex GST: ₹126.27
Specification:Weight: 125 gm(Approx.)RPM: 10Operating Voltage: 12V DCGearbox: Attached Metal GearboxShaft diameter: 6mmShaft Length: 21 mmTorque: As per RPMNo-load current = 60 mA(Max)Load current = 300 mA(Max).Dimensions: Body Diameter: 38mm; Motor Length with shaft: 77 mm;Same size motor available..
₹159.01
Ex GST: ₹134.75
Specification:Weight: 125 gm(Approx.)RPM: 200Operating Voltage: 12V DCGearbox: Attached Metal GearboxShaft diameter: 6mmShaft Length: 21 mmTorque: As per RPMNo-load current = 60 mA(Max)Load current = 300 mA(Max).Dimensions: Body Diameter: 38mm; Motor Length with shaft: 77 mm;Same size motor availabl..
₹149.00
Ex GST: ₹126.27
Specification:Weight: 125 gm(Approx.)RPM: 300Operating Voltage: 12V DCGearbox: Attached Metal GearboxShaft diameter: 6mmShaft Length: 21 mmTorque: As per RPMNo-load current = 60 mA(Max)Load current = 300 mA(Max).Dimensions: Body Diameter: 38mm; Motor Length with shaft: 77 mm;Same size motor ava..
₹149.00
Ex GST: ₹126.27
Specification:Weight: 125 gm(Approx.)RPM: 500Operating Voltage: 12V DCGearbox: Attached Metal GearboxShaft diameter: 6mmShaft Length: 21 mmTorque: As per RPMNo-load current = 60 mA(Max)Load current = 300 mA(Max).Dimensions: Body Diameter: 38mm; Motor Length with shaft: 77 mm;Same size motor availabl..
₹149.00
Ex GST: ₹126.27
Specification:Weight: 125 gm(Approx.)RPM: 60Operating Voltage: 12V DCGearbox: Attached Metal GearboxShaft diameter: 6mmShaft Length: 21 mmTorque: As per RPMNo-load current = 60 mA(Max)Load current = 300 mA(Max).Dimensions: Body Diameter: 38mm; Motor Length with shaft: 77 mm;Same size motor available..
₹149.00
Ex GST: ₹126.27
Plastic Tire Wheel With DC 3-6v Gear Motor For Arduino Smart Car.Specification: Voltage: DC 3V-6VCurrent: 100 MA-120MAReduction rate: 48: 1RPM (With tire): 100-240Car Speed(M/minute): 20-48Motor Weight (g): 29/eachMotor Size: 70mm X 22mm X 18mmNoise: <65dBPackage Included: 1 x DC ..
₹79.00
Ex GST: ₹66.95
100 RPM 12V DC JOHNSON HIGH TORQUE GEARED MOTORS FOR ROBOTICS APPLICATIONS. IT GIVES A MASSIVE TORQUE OF 35KGCM. THE MOTOR COMES WITH METAL GEARBOX AND OFF-CENTERED SHAFT.SPECIFICATION :Motor Type : High Torque Side Shaft Metal Gearedbox Motor.Rated Voltage : 12V DC.Rated RPM : 100Torque : 35K..
₹699.00
Ex GST: ₹592.37
10RPM 12V DC Johnson high torque geared motors for robotics applications. It gives a massive torque of 120Kgcm. The motor comes with metal gearbox and off-centered shaft.Specification :Motor Type : High Torque Side Shaft Metal Gearedbox Motor.Voltage : 12V DC.RPM : 10Torque : 120KgcmWeight : 18..
₹699.00
Ex GST: ₹592.37
200 RPM 12V DC Johnson high torque geared motors for robotics applications. It gives a massive torque of 32Kgcm. The motor comes with metal gearbox and off-centered shaft.Specification :Motor Type : High Torque Side Shaft Metal Gearedbox Motor.Rated Voltage : 12V DC.Rated RPM : 200Torque : 32KgcmWei..
₹699.00
Ex GST: ₹592.37
300 RPM 12V DC JOHNSON HIGH TORQUE GEARED MOTORS FOR ROBOTICS APPLICATIONS. IT GIVES A MASSIVE TORQUE OF 30KGCM. THE MOTOR COMES WITH METAL GEARBOX AND OFF-CANTERED SHAFT.SPECIFICATION :Motor Type High Torque Side Shaft Metal Geared box Motor.Rated Voltage 12V DC.Rated RPM 300Torque 30Kgcm..
₹699.00
Ex GST: ₹592.37
600 RPM 12V DC JOHNSON HIGH TORQUE GEARED MOTORS FOR ROBOTICS APPLICATIONS. IT GIVES A MASSIVE TORQUE OF 18KGCM. THE MOTOR COMES WITH METAL GEARBOX AND OFF-CANTERED SHAFT.SPECIFICATION :Motor Type High Torque Side Shaft Metal Gearedbox Motor.Rated Voltage 12V DC.Rated RPM 600Torque 18KgcmWeight..
₹699.00
Ex GST: ₹592.37
60 RPM 12V DC Johnson high torque geared motors for robotics applications. It gives a massive torque of 38Kgcm. The motor comes with metal gearbox and off-centered shaft.SPECIFICATION :Motor Type : High Torque Side Shaft Metal Gearedbox Motor.Rated Voltage : 12V DC. RPM : 60Torque : ..
₹699.00
Ex GST: ₹592.37
This is 12V DC motor which has a gearbox of 45mm diameter. The planetary type gearbox of this motor has a 14:1 gearhead which produces 350 RPM with the torque value of around 78 N-CM.Features:Rated Voltage: 12VDCRated Torque: 30 kg-cmRated Speed: 350 RPMBody Diameter: 50 mmShaft Diameter: 10 mmRated..
₹2,948.01
Ex GST: ₹2,498.31
This is 12V DC motor which has a gearbox of 45mm diameter. The planetary type gearbox of this motor has a metal gears and a center shaft. The Shaft of the motor is loaded with bearing for wear resistance and smooth operation.Features:Rated Torque (kg-cm): 21Stall Torque(kg-cm): 80Rated Voltage: 12VR..
₹2,948.01
Ex GST: ₹2,498.31
MG90S Metal Gear RC Micro Servo For RC ModelDescription:Item Name: MG90S servoWeight: about 13.4gDimension: 22.8 x 12.2 x 28.5mmStall Torque: 1.8kg/cm(4.8V ),2.2kg/cm(6V)Operating Speed: 0.1sec/60degree(4.8v), 0.08sec/60degree(6v)Operating Voltage: 4.8-6.0VMotor Type: coreless motorConnector W..
₹239.00
Ex GST: ₹202.54
Manipulator Aluminum Robot Arm claw gripper MG995 Servo Bracket for Robot Smart Car Base Arduino projects robots NEW Material: hard aluminum alloy Paw maximum angle distance: 55mm Overall length of claws: 108mm (paw maximum length of the overall closed) Claws overall width: 98mm (when open paws maxi..
₹589.00
Ex GST: ₹499.15
This is 2 Axis Pan Tilt Brackets For Camera/Sensors for Servo SG90S MG90S which is based on 2 axis pan and tilt mechanism for mounting wireless/ wired camera and sensors on robot assembly. Panning, rolling and tilting is achieved by controlling Servo motors using PPM pulses. Suitable for DIY panning..
₹119.00
Ex GST: ₹100.85
Features:Material: Rigid Aluminum AlloyLength: 22mmWidth: 12mmThickness: 5mmPackage Includes:1 x BO Motor Bracket/Holder with Screw..
₹53.10
Ex GST: ₹45.00
The Futaba Compatible S3003 Plastic Geared Servo Motor is a decent servo for every hobbyist and electronics student. The powerful motor is PWM controlled for easy interfacing.Features:Control System: +Pulse Width Control 1520usec NeutralRequired Pulse: 3-5 Volt Peak to Peak Square WaveOperating Vo..
₹299.00
Ex GST: ₹253.39
Aluminum Servo Horn Rocker Arm 25T For MG995 MG946R MG996R MG945 S3003 RC Model Motor Kids RC Toy Parts.100% brand new and high quality.High-quality and durable in performance.Suitable for MG995 MG946R MG996R MG945 S3003 RC Model MotorSpecification:Teeth Number : 25TOverall Size : 35 x 15 x 6mm/ 1.4..
₹116.01
Ex GST: ₹98.31
This servo tester or ESC Taster is offered 3 modes to check Servo or ESC, and other devices. The Manual Mode allows you to turn the knob to different speeds and check the reaction time. The Neutral mode makes the servo go back to the neutral point. The Automatic ’’Window Wiper’’ Mode makes the ..
₹119.00
Ex GST: ₹100.85
This servo gripper is used for the pick and place robot mechanism. This product is generally used by students for their projects. It is also used for industrial uses.This product is made of acrylic sheets and it is very easy to assemble and use.Package Content:1 x Servo Gripper1 x Set of ScrewsNote:..
₹599.00
Ex GST: ₹507.63
This is the transparent acrylic perspex plastic mounting bracket for SG90 and MG90 Servo Motors.With this Servo Mount Holder Bracket For SG90/MG90, you can mount your servo on the robot chassis very securely and firmly. The use of an acrylic body accounts for the lightweight and strong design of the..
₹33.00
Ex GST: ₹27.97
Features:This product is made of high-quality materials and is durable.Various sensors can be installed to complete a variety of novel interactive works through the servo controller.It is convenient to install the camera, which can realize image monitoring and image recognition and tracking.This pro..
₹249.00
Ex GST: ₹211.02
The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat ..
₹140.42
Ex GST: ₹119.00
TowerPro MG995 is Metal Gear Servo Motor. You can use any servo code, hardware or library to control these servos, so it’s great for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. The MG995 Metal Ge..
₹399.01
Ex GST: ₹338.14
This is an upgraded version of the famous MG995 servo. It has a redesigned PCB and IC control system which makes it far more accurate. Its gearing and motor are also upgraded to improve dead bandwidth and cantering. This servo is more accurate, and safe to use in aircraft which requires precise serv..
₹349.00
Ex GST: ₹295.76
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors.To simplify use as two bridges each pair of chann..
₹119.00
Ex GST: ₹100.85
L293D use 16 pin DIP package, its internal integration is bipolar H - bridge circuit.This kind of bipolar pulse width method has many advantages, such as the current continuous, or microcurrent vibration when the motor stops, which as a lubrication effect. It can eliminate the dead zone of static fr..
₹169.00
Ex GST: ₹143.22
L298N 2A Based Motor Driver is a high power motor driver perfect for driving DC Motors and Stepper Motors.It uses the popular L298 motor driver IC and has an onboard 5V regulator which it can supply to an external circuit. It can control up to 4 DC motors, or 2 DC motors with directional and speed c..
₹164.00
Ex GST: ₹138.98
28BYJ-48 is the most commonly used stepper motor because of its compact size, 5V power supply (that can be provided by any controller), and a high level of control. It has a stride angle of 5.625°/64, hence it will make 64 steps to complete one rotation (as every step covers 5.625) so it has a..
₹155.00
Ex GST: ₹131.36
Specification:If jumper is hit the position of ON DP, that means 16 segment (4988) or 32 segment (8825)Jm connected motorconnect 5v and 9v power supplyE, S, D, G, respectively corresponding to the connection of the Enable/Step/Dir/Gnd drive signal outputPackage included:1 x A4988 / DRV8825 Stepper ..
₹109.00
Ex GST: ₹92.37
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with a built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional c..
₹109.00
Ex GST: ₹92.37
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver. The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V an..
₹169.00
Ex GST: ₹143.22
Description:L293D Motor Driver Module is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L293 motor driver IC. It can drive 4 DC motors on and off, or drive 2 DC motors with directional and speed control.The driver greatly simplifies and increases th..
₹109.00
Ex GST: ₹92.37
Part No:L293DPin No: 16 pinsPackage included:1 x L293D Driver IC..
₹59.00
Ex GST: ₹50.00
Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A. Use eight high-speed Schottky diodes at the motor output as protection. Stack design can be directly plugged into the Arduino, easier to use.The L298P shield DC motor driv..
₹799.00
Ex GST: ₹677.12
The NEMA17 4.2 kg-cm Stepper Motor can provide 4.2 kg-cm of torque at 1.2A current per phase. The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The motor’s position can be commanded to move or hol..
₹589.00
Ex GST: ₹499.15
The TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor driver board is for axis control with Input signal high-speed optocoupler isolation, the large heat sink to ensure good heat dissipation. Stepper motor driver is Semi-flow mode adjustable, semi-flow current adjustable, with..
₹449.00
Ex GST: ₹380.51