Lithium-Polymer (Li-Po) Battery for robotic applications. It can give great instantaneous discharge current up to 55A. Very lightweight and small size compared to Ni-Cd, Ni-MH and Lead-acid batteries. Very long life without losing charging capacity. Weights just 184 gm. Description:Battery para..
₹1,499.00
Ex GST: ₹1,270.34
Lithium-Polymer (Li-Po) Battery for robotic applications. It can give great instantaneous discharge current up to 82.5A. Very lightweight and small size compared to Ni-Cd, Ni-MH and Lead-acid batteries. Very long life without losing charging capacity. Weights just 380 gm.Description:Battery paramete..
₹2,954.00
Ex GST: ₹2,503.39
Lithium-Polymer (Li-Po) Battery for robotic applications. It can give great instantaneous discharge current up to 135A. Very lightweight and small size compared to Ni-Cd, Ni-MH and Lead-acid batteries. Very long life without losing charging capacity. Weights just 380 gm.Description:Battery parameter..
₹4,499.00
Ex GST: ₹3,812.71
This is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, this version is ideal for use with multi-copters and rovers. The APM 2.8 is a complete open source autopilot system and the bestselling technology that on the prestigious 2012 Outback Challenge UAV competition..
₹6,999.00
Ex GST: ₹5,931.36
The KK2.1.5 is next big evolution of the first generation KK flight control boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft ..
₹5,999.00
Ex GST: ₹5,083.90
CC3D EVO CopterControl Hardware FeaturesPowerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.3-axis high-performance MEMs gyros and 3-axis high-performance&n..
₹1,199.00
Ex GST: ₹1,016.10
DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS Supports nine multi-rotor configurations, the DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flyin..
₹22,499.00
Ex GST: ₹19,066.95
The DJI NAZA-M Lite V1.1 with GPS Kit is a simplified version of, and it inherits the high reliability and stability from the Naza M flight controller’s heritage. The Naza M Lite controller has an all-in-one design that means the installation is easy and straightforward while saving space and weight..
₹15,269.00
Ex GST: ₹12,939.83
It is a pre-programmed controller board with an onboard accelerometer and a Gyro sensor specially designed for UAVs. It can be used to design model aircraft, drones, quadcopters, etc.Features:Consists of Atmega 324 U Microcontroller On-board.Consists of an LCD Display on board for display purposes i..
₹3,100.00
Ex GST: ₹2,627.12
Characteristics:Compatible with Alexmos2.2 or firmware below, compatible with the newest firmware BruGi_050 German, standard Russian2.2 firmwareTipsA new generation of strong input control 32-bit processor, a circuit board with PX4FMU + PX4IOSpecifications:32-bit Pixhawk PX4 Autopilot Open Code Fli..
₹14,960.00
Ex GST: ₹12,677.97
This PIXHAWK 2.4.8 Full Combo Kit consists of all in one required product for the drone flight controller. find all product included in this kit at below package includes.PIXHAWK PX4 2.4.8 Flight Controller is a high-performance autopilot-on-module suitable for fixed-wing, multi-rotors, helicopters,..
₹14,960.00
Ex GST: ₹12,677.97
Hot
Description:Item name: 1045 PropellerDiameter: 10inPitch: 4.5inPropeller diameter: 25.4cmCentre bore diameter : 6mm front and 9mm reverse side.Centre seat TH: 6mmWeight: about 14g/pairColor: black, red, yellow, green, orange.Usage: for quadcopter and multirotor Package included:1 x CW Pro..
₹116.82
Ex GST: ₹99.00
Description:Item Name: 5045 BullnoseLength: 5 inchPitch: 4.5 inchWeight: 4.2gHub Id Dia: 5.02mmHub Thickness: 7.68mmAdapter Rings: noSuit for QAV250 ZMR250 Racer 250 Falcon 250 280 etc. RC multirotors.Excellent balance, low vibration, unbroken Package included:1 XCW 5045 Propeller1 x CCW ..
₹99.00
Ex GST: ₹83.90
Description:Brand: GemfanItem Name: Carbon Nylon 8045 PropellerMaterial: carbon nylonSize: 8 x 4.5''Color: blackWeight: 14g per pairDiameter of centre bore: 5.0mmThickness of center: 9.7mmHole size: 5mm with 3mm, 3.17mm and 4mm adapters. Can be reamed to 6mm or 1/4" if needed.Recommended wheelbase: ..
₹99.00
Ex GST: ₹83.90
Carbon fiber 1045 10 * 4.5" CW CCW propellers prop for F450 500 550 RC quadCopter multiCopter.These propellers are extremely lightweight and durable. You can expect an increase in overall motor efficiency owing to the ultra thin and stiff carbon construction.Features:Lightweight and durableGreat bal..
₹898.99
Ex GST: ₹761.86
FS-i6 Specifications:Channels: 6 ChannelsModel Type: Glider/Heli/AirplaneRF Range: 2.40-2.48GHzBandwidth: 500KHzBand: 142RF Power: Less Than 20dBm2.4ghz System: AFHDS 2A and AFHDSCode Type: GFSKSensitivity: 1024Low Voltage Warning: less than 4.2VDSC Port: PS2;Output:PPMCharger Port: NoANT length: 26..
₹4,898.99
Ex GST: ₹4,151.69
Overview:The FS-i6S transmitter and FS-iA10B Receiver constitute a 10 channel 2.4GHz AFHDS 2A digital proportional computerized RC System. This system supports quadcopters.The AFHDS 2A (Automatic Frequency Hopping Digital System Second Generation) developed and patented by Flysky is specially develo..
₹6,489.00
Ex GST: ₹5,499.15
Hot
This 2.4Ghz Antenna is universal 2.4Ghz Antenna for X6R X8R D Series XSRF3O XSRF3PO XSRF4O XSRF4PO Receiver. And Also compatible with other transmitter and receiver like Radiolink.Feature:Connector: Ipex1FrSky IPEX1 dipole antenna with a copper tube contributes much better efficiency and stability.U..
₹69.62
Ex GST: ₹59.00
Features:Channels: 6 ChannelsModel Type: Heli, Airplane, GlidRF Power: Less than 20dbModulation: GFSKCode Type: 2.4Ghz No InterferenceSensitivity: 1024Low Voltage Warning: LEDDSC Port: YesPacket content:1 X FS-CT6B TRANSMITTER1 X FS-R6B RECEIVER..
₹2,999.01
Ex GST: ₹2,541.53
Features:Works in the frequency range of 2.405 to 2.475GHz.This brand has been divided into 142 independent channels, each radio system uses 16 different channels and 160 different types of hopping algorithm.This radio system uses a high gain and high-quality multi-directional antenna, it covers the..
₹3,999.00
Ex GST: ₹3,388.98
FS-I6 SPECIFICATIONS:Channels: 6 ChannelsModel Type: Glider/Heli/AirplaneRF Range: 2.40-2.48GHzBandwidth: 500KHzBand: 142RF Power: Less Than 20dBm2.4ghz System: AFHDS 2A and AFHDSCode Type: GFSKSensitivity: 1024Low Voltage Warning: less than 4.2VDSC Port: PS2;Output:PPMCharger Port: NoANT length: 26..
₹4,898.99
Ex GST: ₹4,151.69
REVIEWSThe Fly sky FS-i6X 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver for those who are interested in Radio controller.The AFHDS 2A (Automatic Frequency Hopping Digital System Second Generation) developed and presented by FLYSKY is specially developed for all radio control..
₹5,049.00
Ex GST: ₹4,278.81
This FS-IA6 6CH AFHDS 2A 2.4G Radio Receiver works great with the FlySky FS-i6 Controller. This compact 6 channel receiver is great for any model using up to 6 channels and reliable, interference-free 2.4GHz AFHDS2A signal operation with a range exceeding 500 meters, it can be considered to be..
₹1,299.00
Ex GST: ₹1,100.85
The Flysky FS-IA6B RF 2.4GHz 6CH PPM output with iBus port receiver works great with the FlySky FS-i6 Controller. This compact 6 channel receiver is great for any model using up to 6 channels and, with a range exceeding 500 meters, it can be considered to be the full range for all but the most deman..
₹1,449.00
Ex GST: ₹1,227.97
The HDV-1 action camera from DYS is a high quality, feature-packed camera with a surprisingly modest price tag. The dimensions of the HDV-1 are very similar to higher-priced equivalents, giving it a wide range of compatibility with brushless gimbals such as the Quantum Q-2D and Tarot T-2D. Many acce..
₹9,729.01
Ex GST: ₹8,244.92
Transmitter TS832:New version upgrade to 48 channels:cover A,B,C,D,E,F band,and will be more stable and better heat dispersion.600mW long range AV wireless system,about 5km range in the open area.Two switching buttons: CH button for frequencies channels switching, FR button for frequencies bands swi..
₹4,246.01
Ex GST: ₹3,598.31
Angle control accuracy: + 0.02Maximum controllable speed:Pitch direction (TILT): + 200 degree /sControllable rotation rangePitch direction (TILT):-120 degrees to +15 degreesWorking current: 30mA (@25V) 50mA (@12V)Locked rotor current: 350mA (@25V) 700mA (@12V)Working environment temperature: -20 deg..
₹9,438.01
Ex GST: ₹7,998.31
Features:It has 6-axis gyro which can have more stable flying and be easy to control.One key to return function makes it easy to find the way home.Super bright colorful LED light, make it more dazzle beautiful and colorful night light.Can fly both indoor and outdoor.Function:/ ascend / descend / for..
₹2,999.01
Ex GST: ₹2,541.53
Brand: HELIWAY Type: Brushed Racing Quadcopter,Indoor,Quadcopter Model: 902HS Features: Brushed Version,Radio ControlMotor Type: Brushed Motor Functions: 3D rollover,Forward/backward,Headless Mode,Height Holding,One Key Automatic Return,Sideward flight,Turn left/right,Up/down,Wit..
₹4,499.00
Ex GST: ₹3,812.71
Features:Type: 103Power: 0.1WResistance: 10KPackage included:10 x 10K OHM Trimpot Trimmer Pot Variable Resistor 6mm..
₹49.01
Ex GST: ₹41.53
Potentiometers also were known as POT, are nothing but variable resistors. They can provide a variable resistance by simply varying the knob on top of its head.Features:Type: Rotary a.k.a Radio POTAvailable in different resistance values like 500Ω, 1K, 2K, 5K, 10K, 22K, 47K, 50K, 100K, 220K, 470K, 5..
₹79.00
Ex GST: ₹66.95
12V 10A Industrial power supply with Aluminium casing, High quality. Best suitable for CNC Machines and 3D printers. From Flyrobo.in, You will get best quality and most efficient industrial SMPS ( Industrial power supply).Features:High efficiencyLow temperatureLED indicator for power onOver Load and..
₹689.00
Ex GST: ₹583.90
The 12V/1A SMPS Power Adaptor (Power supply) is a Switched-mode power supply (SMPS). This is the advanced power supply and better than conventional ones. If you want low losses and stable output also you don’t want to make a rectifier, so go for SMPS.Features:Input Voltage range : 110~ 240VACI..
₹199.00
Ex GST: ₹168.64
24V 10A Industrial power supply with Aluminium casing, High quality. Best suitable for CNC Machines and 3D printers. From Flyrobo.in, You will get best quality and most efficient industrial SMPS ( Industrial power supply). Features:High efficiency, long life, and high reliabilityLow d..
₹1,149.00
Ex GST: ₹973.73
A lithophane is a molded artwork in very thin translucent that can be only seen clearly when you have light source in back.This Lithophane is a made of a PLA material with a 3D printer. 3D printed Lithophane photo is a great idea for a gift to dear one. Steps to Get your own Lithophanes Ph..
₹500.00
Ex GST: ₹423.73
This is a 3D Printed product used to mount Motor to tilt it with servo. This product is mainly used in making dual-copter and Tricopter.This model is compatible with BLDC Motor and Tower pro SG90 ServoMaterial: PLA PlasticProduct Weight: 15 Gram ( Click here If you want..
₹130.00
Ex GST: ₹110.17
Flight control damping plate Controller Board Anti-vibration Set Shock Absorber for APM 2.5 2.6/KK/MWC F16285Material: PLASize: 10 * 6 * 1cm (Approx)Suit for different open source flight controller, like APM 2.5/2.6, KK, MWCPackage list: 1 x Flight Controller Anti-vibration Set Shock Absorber..
₹249.00
Ex GST: ₹211.02
Choose our Ender-3 V-slot Prusa I3 New fashion 3D Printer Kit, following the step of the trend and integrating with classic elements, become a new generation economic DIY 3D printer for fans to build their dreamy pictures at will.Main Features:Extruder greatly reduces plugging risk and bad extrusion..
₹15,449.00
Ex GST: ₹13,092.37
Choose our Ender-3 V-slot Prusa I3 New fashion 3D Printer Kit, following the step of the trend and integrating with classic elements, become a new generation economic DIY 3D printer for fans to build their dreamy pictures at will.Features:Upgraded Version of Ender-3DIY Assembly: Enjoy the satis..
₹25,471.48
Ex GST: ₹21,586.00
Creality 3D is the pioneer company for making a 3D printer. Creality3D manufacture best quality 3D printer which gives the highest printing quality. Creality3D CR-10S Pro 3D Printer is one of the latest 3d printers of the crealty3d company in FDM 3D Printer. Here you will get this 3d printer at..
₹52,999.00
Ex GST: ₹44,914.41
Features:Power consumption: 50WOperating Voltage: AC 230 VTip to ground resistance: under 2WTip to ground potential: under 2mvAdvanced ceramic type heating element.Applicable to a wide range of applications.Quick in attaining working temperature.Constant tip temperature.Low leakage current.Thinner g..
₹234.01
Ex GST: ₹198.31
Desoldering Pump or Solder Sucker help to remove solder from the electric equipment Circuit for troubleshooting, repair, replacement, and salvage...
₹99.00
Ex GST: ₹83.90
Deluxe Soldering Iron is premium quality Soldering Iron. The most popular product General purpose for all electronic applications Continuous rated (24 hours). Attains full operating temperature within seconds Maintains full constant tip temperature.Low current leakage. Maximum heat transfe..
₹149.00
Ex GST: ₹126.27
Features :Good solderability, strong moisture. Easy to clean.High reliability, widely used in electronic products.Melting point: 183℃ (approx)FLUX : 2.0%Wire diameter: 1mmWeight: 42gSolder is a fusible metal alloy used to join together metal workpieces and having a melting point below that of the wo..
₹99.00
Ex GST: ₹83.90
Hot
This Soldering bit is a High-Quality Soldering Iron Tip. This is a Nickel Plated 35 Watt Chisel tip. it can be used with any standard 35 W soldering iron. Upgrade your soldering gun with a news tip, you’ll get better & faster solder joints and the whole process will be much more enjoya..
₹116.01
Ex GST: ₹98.31